Gestetner 5309L Service manual

DRAFT 2002/08/02
67
3. User Tools
Accessing User Tools
You can change or set the machine's
default with User Tools. This section
is intended for the machine adminis-
trator.
Reference
For the User Tools menu, see ⇒
p.69 “User Tools Menu”.
A
AA
APress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key.
B
BB
BHold down the {
{{
{Clear/Stop}
}}
}key
for at least 3 seconds.
The User Tools display appears on
the guidance display.
Note
❒If you press the wrong key, try
pressing the above keys from
the beginning.
C
CC
CWith the number keys, enter the
desired user tool number.
Reference
See ⇒p.69 “User Tools Menu”.
When you want to leave User
Tools
APress the {
{{
{Clear Modes/Energy
Saver}
}}
}key.
Reference
If you want to change the set-
tings of a selected user tool
number, see ⇒p.68 “Chang-
ing the Settings of User
Tools”.

DRAFT 2002/08/02
User Tools
68
3
Changing the Settings of User Tools
A
AA
AAfter entering the desired user tool number, press the {
{{
{q
qq
q}
}}
}key.
The value or mode set at the factory will be displayed at the end of the second
line on the guidance display.
Note
❒If you designate the wrong number, press the {
{{
{Clear Modes/Energy Saver}
}}
}
key. Then, re-enter the desired number.
B
BB
BEnter the desired value or mode with the number keys.
C
CC
CPress the {
{{
{q
qq
q}
}}
}key to store the desired value or mode.

DRAFT 2002/08/02
Changing the Settings of User Tools
69
3
Note
❒If you enter the wrong value or mode, press the {
{{
{Clear Modes/Energy Saver}
}}
}
key. Then, go back to step A.
D
DD
DPress the {
{{
{Clear Modes/Energy Saver}
}}
}key to leave User Tools.
User Tools Menu
No. Mode Function
5 Tape Marker Off Specifies whether the optional tape dispenser can be used.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
10 Min. Print Specifies the minimum number of prints that can be en-
tered with the number keys.
Note
❒Default: 0
❒Adjustment value: 0 to 9999
11 Max. Print Specifies the maximum number of prints that can be en-
tered with the number keys.
Note
❒Default: 0
❒Adjustment value: 0 to 9999

DRAFT 2002/08/02
User Tools
70
3
12 Set Language If you want to change the language used by the guidance
display, select the language version.
Note
❒Default: 1
❒Adjustable value:
•0: Japanese
•1: English
•2: German
•3: French
•4: Italian
•5: Spanish
•6: Chinese
•7: Dutch
•8: Portuguese (BRAZIL)
13 Set Size Mode Change the size mode.
Note
❒Default: 0
❒Adjustment value: 0: mm 1: Inch
20 Buzzer On Turns the buzzer ON or OFF.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
21 Prints/Master Cost The optional key counter usually counts the number of
prints made regardless of the number of masters used. For
accounting purposes, it is possible for the key counter to be
incremented by a value between 0 and 50 whenever a new
master is used.
Example: The key counter is adjusted to increase by 20 for
each master fed. If 100 copies have been made and the mas-
ter is replaced, the key counter will increase by 120.
Note
❒Default: 0
❒Adjustment value: 0 –50
No. Mode Function

DRAFT 2002/08/02
Changing the Settings of User Tools
71
3
25 Clear 2 In 1 By default, when master making is finished in Combine
Copies mode, this mode stays selected for the next master
making.
If you want master making turned off, select “1”.
Note
❒Default: 0
❒Adjustable value: 0: No 1: Yes
❒Even if you select “1”in this mode, Combine Copies
mode is not cleared when the next original are set in the
optional document feeder.
❒For details about Combine Copies, see ⇒p.46 “Com-
bine—Combining 2 Originals onto One Print”.
29 Pht Backgrnd Correct When you make prints in Photo or Letter/Photo mode, the
background of the prints might become dirty. You can pre-
vent this using this function.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
40 Original Specifies the image mode at power on.
Note
❒Default: 0
❒Adjustment value:
•0: Letter mode
•1: Letter/Photo mode
•2: Photo mode
41 Image density Specifies the image density at power on.
Note
❒Default: 1
❒Adjustment value:
•0: Light
•1: Standard
•2: Dark
•3: Darker
42 Print Speed Specifies the printing speed at power on.
Note
❒Default: 2
❒Adjustment value:
•1: 80 sheets/minute
•2: 100 sheets/minute
•3: 130 sheets/minute
No. Mode Function

DRAFT 2002/08/02
User Tools
72
3
43 Auto Cycle Mode Specifies whether Auto Cycle mode is selected at power
on.
Note
❒Default: 1
❒Adjustment value: 0: No 1: Yes
46 Fine Mode Specifies whether Fine mode is selected when the power is
turned on.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
47 Swap Master Making
Key
Specify to switch between Print Start key and Master Mak-
ing key functions.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
81 Quality Start No. You can select how many times Quality Start mode is car-
ried out for each master making.
When you set the Quality Start function, the bold letter or
solid images might be light.
Note
❒Default: 0
❒Adjustment value: 0 to 3 times
82 Skip Feed No. When you use the Skip Feed Printing function, you can se-
lect how many times the drum rotates while one sheet of
paper is fed.
Note
❒Default: 2 times
❒Adjustment value: 1 to 9 times
84 Auto Multi copy If you set an original on the exposure glass and press the
{
{{
{Combine}
}}
}key and {
{{
{Master Making}
}}
}key, two identical imag-
es are printed on one sheet.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
❒For details about Combine, see ⇒p.46 “Combine—
Combining 2 Originals onto One Print”.
No. Mode Function

DRAFT 2002/08/02
Changing the Settings of User Tools
73
3
87 Memory Print Each print set or stack will contain the number of prints
you program in Memory mode.
If set to Memory, Memory mode will work.
If set to Stack, Stack mode will work.
Note
❒Default: 0
❒Adjustment value: 0: Memory 1: Stack
❒For details about Memory mode, see ⇒p.43 “Memory
Mode—Group Printing from Different Originals”.
88 Auto Memory/Class In this function, the machine stops printing for 2 seconds
after one set of prints are completed in Memory mode and
Class mode. This gives you the chance to separate each set
when you do not have an optional tape dispenser.
For example, you can remove prints one by one from the
paper delivery tray or insert one sheet of paper between
the prints.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
113 Resettable Count Used to display the total number of masters and prints.
•M: Total number of masters
•P: Total number of prints
114 CLR Resettable Count Clears the resettable master/print counter.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
120 User Code Mode Selects user code mode. When you set this function, you
have to also specify the auto reset time. For details about
user code mode, see ⇒p.76 “User Codes”.
Note
❒Default:
•User Code mode: 0
•Auto Reset time: 0
❒Adjustment value:
•User Code mode: 0: No 1: Yes
•Auto Reset time: 0: No, 1 –5 minutes
No. Mode Function

DRAFT 2002/08/02
User Tools
74
3
121 UC Count Displays the number of masters and prints made in each
user code.
Note
❒M: Number of masters
❒P: Number of prints
122 Clear UC Count Clear each user code counter.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
123 Total UC Count Display the total number of masters and prints for all the
20 user codes.
Note
❒M: Number of masters
❒P: Number of prints
124 Clear Total UC Count Clear the total user code counter.
Note
❒Default: 0
❒Adjustment value: 0: No 1: Yes
125 Auto Energy Saving You can set the time until the Energy Saver mode starts.
Note
❒Default: 3 Min. (minutes)
❒Adjustment value: 0: No, 1 –120: Min
160 Side Ers. Adjust the default side edge margin width in Edge Erase
and Center/Edge Erase mode.
Note
❒Default:
•Metric Version: 5 mm
•Inch Version: 0.2"
❒Adjustable value:
•Metric Version: 2 –20 mm
•Inch Version: 0.1" –0.8"
No. Mode Function

DRAFT 2002/08/02
Changing the Settings of User Tools
75
3
Entering decimal values in No. 160–162:
•Press the {
{{
{Program}
}}
}key to enter a decimal point.
•Press the {
{{
{q
qq
q}
}}
}key to fix the value.
161 Center Ers. Adjust the default center margin width in Center/Edge
Erase mode.
Note
❒Default:
•Metric version: 10 mm
•Inch version: 0.4"
❒Adjustable value:
•Metric version: 4 –60 mm
•Inch version: 0.2" –2.3"
162 Horizontal Ers. Adjust the default horizontal edge (top and bottom) mar-
gin in Edge Erase and Center/Edge Erase mode.
Note
❒Default:
•Metric version: 5 mm
•Inch version: 0.2"
❒Adjustable value:
•Metric version: 2 –20 mm
•Inch version: 0.1" –0.8"
170-172 Ers. **1L
Ers. **2L
Ers. **3L
Set up and register three original sizes for when perform-
ing edge erase of non-standard size originals, or perform-
ing center frame erase.
Note
❒Default: 0 ×
0 mm
❒Adjustable value: 100-257 mm ×100-364 mm
No. Mode Function

DRAFT 2002/08/02
User Tools
76
3
User Codes
If the machine is set to use the User
Code function, operators must enter
their user codes before the machine
can operate. The machine keeps count
of the number of prints made under
each user code.
In this mode, the following 20 user
codes (fixed) can be used to access the
machine: 382, 191, 182, 173, 164, 155,
146, 137, 128, 119, 482, 291, 282, 273,
264, 255, 246, 237, 228, 219
Note
❒To prevent unauthorized users
from accessing the machine, note
down the codes and then black out
the codes from this manual.
How to Set User Code Mode (#
120)
The following procedure explains
how to set user code mode. This must
be done before a user code can be en-
tered.
A
AA
APress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key.
B
BB
BHold down the {
{{
{Clear/Stop}
}}
}key
for at least 3 seconds.
C
CC
CEnter “120”with the number keys
and press the {
{{
{q
qq
q}
}}
}key.
D
DD
DEnter “1”(Yes) with the number
keys and then press the {
{{
{q
qq
q}
}}
}key.

DRAFT 2002/08/02
User Codes
77
3
E
EE
ESpecify the Auto Reset time. En-
ter the desired setting with the
number keys and press the {
{{
{q
qq
q}
}}
}
key.
F
FF
FPress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key to leave User Tools.
How to Use User Code Mode
A
AA
AEnter your assigned 3-digit user
code with the number keys, then
press the {
{{
{q
qq
q}
}}
}key.
B
BB
BMake your prints.
C
CC
CAfter you have finished, press the
{
{{
{Clear/Stop}
}}
}key while holding
down the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key.
Note
❒This prevents others from mak-
ing prints using your user code.
❒If you do not follow this step,
the machine will not request the
next user for their codes unless
the auto reset time has expired.
How to Check the User Code
Counter (# 121)
Reference
If you want to check the total mas-
ters and prints made under all user
codes, see ⇒p.80 “How to Check
the Total Number of Masters and
Prints Made Under All User Codes
(# 123)”.

DRAFT 2002/08/02
User Tools
78
3
A
AA
APress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key.
B
BB
BHold down the {
{{
{Clear/Stop}
}}
}key
for at least 3 seconds.
C
CC
CEnter “121”with the number keys
and press the {
{{
{q
qq
q}
}}
}key.
The number of masters and prints
made under the user code “382”
will be displayed in the guidance
display.
D
DD
DKeep pressing the {
{{
{q
qq
q}
}}
}key to dis-
play the number of masters and
prints made under your user
code.
E
EE
EPress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key to leave User Tools.
How to Clear the User Code
Counter (# 122)
Reference
If you want to clear every user
code counter, see ⇒p.80 “How to
Clear the User Code Total Counter
(# 124)”.

DRAFT 2002/08/02
User Codes
79
3
A
AA
APress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key.
B
BB
BHold down the {
{{
{Clear/Stop}
}}
}key
for at least 3 seconds.
C
CC
CEnter “122”with the number keys
and press the {
{{
{q
qq
q}
}}
}key.
D
DD
DKeep pressing the {
{{
{q
qq
q}
}}
}key until
desired user code is displayed.
E
EE
EEnter “1”(Yes) with the number
keys and press the {
{{
{q
qq
q}
}}
}key.
F
FF
FPress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key to leave User Tools.

DRAFT 2002/08/02
User Tools
80
3
How to Check the Total
Number of Masters and Prints
Made Under All User Codes (#
123)
A
AA
APress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key.
B
BB
BHold down the {
{{
{Clear/Stop}
}}
}key
for at least 3 seconds.
C
CC
CEnter “123”with the number keys
and press the {
{{
{q
qq
q}
}}
}key.
The total number of masters and
prints made under all user codes
will be displayed in the guidance
display.
•M: Number of masters
•P: Number of prints
D
DD
DPress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key to leave User Tools.
How to Clear the User Code
Total Counter (# 124)
A
AA
APress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key.

DRAFT 2002/08/02
User Codes
81
3
B
BB
BHold down the {
{{
{Clear/Stop}
}}
}key
for at least 3 seconds.
C
CC
CEnter “124”with the number keys
and press the {
{{
{q
qq
q}
}}
}key.
D
DD
DEnter “1”(Yes) with the number
keys and press the {
{{
{q
qq
q}
}}
}key.
E
EE
EPress the {
{{
{Clear Modes/Energy Sav-
er}
}}
}key to leave User Tools.

DRAFT 2002/08/02
User Tools
82
3

DRAFT 2002/08/02
83
4. Replenishing Supplies
Loading Paper into the Paper Feed Tray
The Load Paper indicator (B) lights
when the paper feed tray runs out of
paper.
Replenishing Paper
A
AA
APress the {
{{
{Clear/Stop}
}}
}key.
Note
❒This step is necessary only if
you want to pause a print run to
replenish paper.
B
BB
BPress the {
{{
{Paper Feed Tray Down}
}}
}
key.
Note
❒The paper feed tray will lower
without the key being pressed
when the printing paper runs
out.
❒The top sheet might remain be-
tween the feed rollers. In this
case, remove the top sheet.
C
CC
CLoad paper into the paper feed
tray.
TSLY013E

DRAFT 2002/08/02
Replenishing Supplies
84
4
Note
❒Correct paper curl before set-
ting the paper.
D
DD
DPress the {
{{
{Print Start}
}}
}key to re-
sume printing.
Changing the Paper Size
A
AA
ARemove the paper from the paper
feed tray.
The paper feed tray will lower.
B
BB
BShift the paper feed side plates
lock lever forward. Adjust the pa-
per feed side plates to match the
paper size.
1: Paper Feed Side Plates Lock Le-
ver
C
CC
CLoad paper into the paper feed
tray.
Note
❒Correct any paper curl before
setting the paper.
❒Make sure that the side plates
touch the paper lightly.
❒Shift the lock lever to its original
position.
D
DD
DAdjust the side plates and the end
plate.
TSLY016E
TSLH01AE
1
TSLY013E
2
1
2
1
TSLH030E

DRAFT 2002/08/02
When the Add Ink Indicator (j) Lights
85
4
When the Add Ink Indicator (j
jj
j) Lights
The Add Ink indicator (j) lights when it is time to supply ink.
R
CAUTION:
R
CAUTION:
R
CAUTION:
R
CAUTION:
A
AA
AOpen the front door.
B
BB
BPull out the ink holder and remove the used ink cartridge.
•If ink comes into contact with your eyes, rinse immediately in running water.
For other symptoms, consult a doctor.
•Keep the ink or ink container out of reach of children.
•If ink is ingested, induce vomiting by drinking a strong saline solution. Con-
sult a doctor immediately.
•Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies avail-
able at an authorized dealer.
TSLH01IE
1
22
TSLH01JE

DRAFT 2002/08/02
Replenishing Supplies
86
4
C
CC
CRemove the cap of the new ink cartridge.
D
DD
DInsert the new cartridge into the ink holder.
E
EE
EReturn the ink holder to its original position until it clicks.
Note
❒Always supply ink of the same color.
❒Make sure to firmly insert the part indicated by the arrow mark into the
guide.
F
FF
FClose the front door.
The machine will start idling to supply ink to the drum.
Note
❒It will stop when the correct amount of ink reaches the drum.
TSLT012E
1
22
TSLT013E
TSLT011E