Getac AY-C431 User manual

www.getac.com
Rugged Mobile Computing Solutions
AY-C431
Battery Charger
REFERENCE GUIDE
Power Indicator
Bay 2 Slot
Bay 1 Slot
Bay 1 Charge Indicator Bay 2 Charge Indicator
Power Connector
Power Switch
561581920005 R00

Reference Guide Reference Guide
Congratulations and thank you for
purchasing the battery charger.
This guide provides operating
information for the charger.
The applicable computer models
are B300, E100, E110, V100, V200,
V110, F110, S400, X500, and T800.
1 .Product Specifications
Parts Specifications
Number of bays 2
Number of LEDs 5 per bay
AC-in power 100 V ~ 240 V
DC Output 13.05 V, 2.4 A (Max.)
Charging time Maximum 5 hours
(at 25 oC)
Dimension 160 × 180 × 72.5 mm
Weight 1.2 kg
Operating
temperature
0 oC ~ 40 oC
Regulation EMC: CE / FCC / CCC
Safety : CB, UL
Green Product
Coverage
RoHS : 6 European Union
RoHS banned materials
Others : 12 universal GP
product banned materials
2 .Safety Instructions
For optimal performance, use the
charger where the recommended
temperature is between 0 C (32 F)
and 40 C (104 F).
Avoid placing the charger in a
location subject to high humidity,
extreme temperatures, mechanical
vibration, direct sunlight, or heavy
dust.
Do not cover or block any ventilation
openings on the charger. For example,
do not place the charger on a bed,
sofa, rug, or other similar surface.
Otherwise, overheating may occur
that results in damage to the
charger.
Do not place the charger on an
unsteady surface.
To avoid hastening the deterioration
of the battery pack thereby
prolonging its useful life, minimize
the number of times you charge it so
as not to frequently increase its
internal temperature.
The charger will stop charging when
input voltage from the AC power line
is unstable.
Avoid touching the charger bay
terminals or damage may occur,
thereby causing improper operation
to it.
Avoid exposing the charger to water
or an electric shock may occur.
Disconnect the AC power cord from
the charger when not in use. The
charger is still in standby mode even
when charger is powered-off if AC
power is connected.
3 .Inserting Battery Pack
Insert the battery pack(s) to bay 1 or
bay 2 slot or to both according to the
battery type.
Depending on the battery charger
model purchased, the bay 1 and bay 2
slots can be for one of the battery
combinations as listed below:
Bay 1 Bay 2 Applicable
Computer Models
Main Battery Main Battery B300, E100, E110,
V100, V200, V110,
F110, S400, X500
and T800
Main Battery 2nd Battery B300
2nd Battery 2nd Battery B300
4 .Connecting Power
1. Plug the female end of the power
cord to the power connector ()
on the charger and the male end
to an electrical outlet ().
2. Press the power button () to
power up and the power indicator
( POWER ) on the front lights
green.
The corresponding bay charge LED
(CH1 / CH2) would light from the
lowest bar (up to 20 % charge), second
lowest bar (up to 40 % charge), third
bar (up to 60 % charge), fourth bar (up
to 80 % charge), and all bars lit (100 %
charge).
NOTE: The first bar of CH1 LED will
light in orange if charging is in an
abnormal state.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.