GFW GALICIA User manual

Size:
Colour:
Finish:
30 x 30 x 120 cm (WDH)
White or Grey or Black
Melamine Cabinet with Gloss Fronts
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Galicia Wall Hanging Narrow Shelf Unit.
Please read the instructions carefully to ensure safe operation of this product,
especially the installation warnings shown in Page 2 of this guide.
Version 1 - 191107
PO No：
Page 1 of 14
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
x2
11/4 Hour
Set Up
Number of persons
needed for assembly

GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
Version 1 - 191107
Page 2 of 14
IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
INFORMATION
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with a damp cloth.
Do not use solvent based cleaners or detergents as they can bleach or damage the product.
This product is designed to hold 10Kg in total, spread evenly over the whole unit.
Do not exceed this weight.
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent them from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
This is a Shelf Unit designed to hang from the wall, only use the brackets provided.
INSTALLATION WARNINGS:
1. In order to prevent the product falling down this product must be installed with the
wall hanging devices provided - do not use any other means to support the product.
2. Carefully assess the suitability of the wall to ensure that the fastening device will
withstand the load and forces generated. Walls can be quite different in construction so
fixings are not supplied - choose the most suitable fixing for your wall type - if in doubt
consult an expert.
3. When drilling the wall always be sure the area to be drilled is free from hidden
electrical wiring, water or gas pipes.
4. The assembly of this product must be done carefully following the detailed stages
in the Assembly Instruction.
5. Installation of this product needs to be carried out in accordance with the
following instructions, see Step 13 onwards...

Version 1 - 191107
Page 3 of 14
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer.
The fittings pack contains small items that should be kept away from children.
6
7
4
1
3
2
8
9
10
5
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS

All parts are packed in one carton
Size: 268 x 284 x 15 mm
Size: 1123 x 267 x 3 mm
Carton No: 1/1
Carton No: 1/1
Description: Base Panel
Description: Back Panel
Qty: 1
Description: Glass Shelf
Qty: 1
Size: 267 x 250 x 5 mm
Carton No: 1/1
Qty: 1
Carton No: 1/1
Carton No: 1/1
Carton No: 1/1
4
5
6
Qty: 1 Qty: 1
Qty: 1
Size: 300 x 285 x 15 mm Size: 1158 x 284 x 15 mm
Size: 1158 x 284 x 15 mm
123
Description: Top Panel
Description: LH Side Panel
Description: RH Side Panel
Description: Lower Fixed Shelf
Qty: 1
Size: 268 x 268 x 15 mm
Carton No: 1/1
Cross Fascia :noitpircseD
Qty: 1
Size: 298 x 70 x 15 mm
Carton No: 1/1
palF :noitpircseD
Qty: 1
Size: 298 x 140 x 15 mm
Carton No: 1/1
7
8
9
10
4
D
Screw for Fitting Wall
Support to carcass
(4x32mm)
Screw for Fitting Hinge
and back panel
(3.5x12mm)
18A
18B
18C
E 8
Item QuantityCode
Fittings (to scale)
Cam Lock
Dowel (8x30mm)
Cam Bolt
10 20 30 40 50 60 70 80
(35mm overall)
Version 1 - 191107
Page 4 of 14
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
Size: 268 x 268 x 15 mm
Carton No: 1/1
Description: Upper Fixed Shelf
Qty: 1

General Hints & Tips
Version 1 - 191107
Page 5 of 14
Fittings (not to scale)
QuantityCode Item
Flap Hinge 2
2L Wall Support
Fixed to Carcass
Wall Bracket 2M
Q
QuantityCode Item
1
HBattery Box and
LED Clip-on Strip
1Sticker
T
Fittings (packed in one LED box).
4
Shelf SupportS
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
A
25mm
A
A
B
Tighten
Stop when
level

Fittings required
For this step:
Tools required
Version 1 - 191107
Page 6 of 14
STEP 1
STEP 2
For this step:
Tools required
A x6
Fittings required
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
B
B
C
C
10
1
10
8
Tighten
B
B x2
C x2
4
3
A x12
A
A
A
A
A
A
AA
A
A
A
A
A
A
A
A
A
A

Fittings required
Version 1 - 191107
Page 7 of 14
STEP 3
STEP 4
For this step:
Tools required
Fittings required
For this step:
Tools required
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
3
4
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
B x12
C x12

Fittings required
B x4
C x4
Tighten
B
C
Version 1 - 191107
Page 8 of 14
STEP 5
STEP 6
For this step:
Tools required
Fittings required
For this step:
Tools required
D x4
L x2
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
DDL
L
B
B
C
C

1
2
E
E
Fittings required
Version 1 - 191107
Page 9 of 14
STEP 7
STEP 8
For this step:
Tools required
Fittings required
For this step:
Tools required
E x4
Q x2
E x4
E
E
E
E
Q
Q
E
E
Q
9
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS

GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
Version 1 - 191107
Page 10 of 14
STEP 9
For this step:
Tools required
After adjusting, please tighten
all screws (E) 100%.

Fittings required
Version 1 - 191107
Page 11 of 14
STEP 10
STEP 11
For this step:
Tools required
Fittings required
For this step:
Tools required
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
S x4
H x1
H
S
2
55
CLIP LED STRIP ONTO REAR OF GLASS SHELF
THEN SLIDE SHELF INTO PLACE MAKING SURE
CABLE IS NOT TRAPPED.
CAREFULLY FEED CABLE THROUGH
HOLE IN REAR OF BACK PANEL.

Version 1 - 191107
Page 12 of 14
STEP 12
Fittings required
For this step:
Tools required
I. II.
III. IV.
Warning: Always ensure the area to be drilled is free from hidden
electrical wires, water or gas pipes.
M
same
horizontal
level
266mm
M x2
USE x3 WALL
FIXINGS PER
BRACKET
STEP 13
For this step:
Tools required
Fittings required
T x1
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
50mm
25mm
H
T
CHOOSE WALL PLUGS
TO SUIT THE TYPE OF
WALL IN YOUR HOME.

Version 1 - 191107
Page 13 of 14
STEP 14
For this step:
Tools required
L
M
i. On the hanging
supports, make
certain hooks (x)
are fully extended.
(x)
ii. With help, hang the cabinet onto the
metal wall brackets by carefully aligning
the end panels so they just miss the ends
of the brackets. Turn upper screw(s) on
either side until unit is horizontal.
iii. When unit is hanging on the
brackets, tighten lower screws
clockwise, so clamping unit to wall
- do not over-tighten.
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS
ii
i
iii iv
CHANGING THE BATTERIES
SLIDE OFF THE LID CHANGE BATTERIES
SLIDE LID BACK ON
USE GOOD QUALITY AA BATTERIES. FOR BEST RESULTS USE RE-CHARGEABLES.

Version 1 - 191107
Page 14 of 14
Assembly Completed
Your Galicia Wall Hanging Narrow Shelf is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference
GALICIA WALL HANGING NARROW SHELF UNIT ASSEMBLY INSTRUCTIONS