GFW KESWICK 4 DOOR MIRROR ROBE User manual

Size: 160 x 58 x 190 cm (WDH)
Colours: Gloss Black-Walnut or Gloss Cream-Oak
Finish: PU Painted Fascias - Melamine Carcass
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
Thank you for purchasing the Keswick 4 Door Mirror Robe.
Please read the instructions carefully to ensure safe operation of this product.
Batch No. 151601
Page 1of 16
PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction.
Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not
destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
CAUTION: There are small components used in the construction of this unit. These loose items should be
kept away from young children whilst assembling your unit to avoid the danger of choking.
Tools Required
Number of people
x2
2.5 Hour
Set Up

KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
IMPORTANT -READ CAREFULLY -RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE.
Batch No. 151601
Page 2of 16
INFORMATION
We recommend that this unit is assembled in the room intended for use.
When you are ready to start, make sure that you have the right tools, plenty of space and a
clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of the carton box or on a
clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Check all screws or bolts are tightened and inspect regularly
Tools not included unless specified in parts list.
WARNINGS
This product is designed to hold 35Kg in total. Do not exceed this weight.
.
This product should only be used on a firm and level floor.
Keep small parts out of reach of children.
Make sure the legs/base remain in contact with the floor.
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
use power tools to construct this product.
tighten screws until parts are assembled or as advised in this guide.
over tighten screws or bolts.
use this product if parts are missing, damaged or worn.
sit or stand on the product.
CARE INFORMATION
Never use scourers, abrasives or chemical cleaners.
To clean, wipe with adamp sponge and warm soapy water. Do not use solvent based
cleaners or detergents as they can bleach or damage the product.
When cleaning the mirrors use a damp cloth with washing up liquid or soft soap; do
not use washing powders or any other substances containing abrasives since these
can scratch the surface.

KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
Batch No. 151601
Page 3of 16
Parts and Fittings Checklist
Please check the pack contents before assembling the product. If any components are missing,
please contact your retailer. The fittings pack contains small items that should be kept away from
small children.
4
1
3
2
8
8
9
9
9
9
6
6
5
7
10
7
10
11 12 13 14

Batch No. 151601
Page 4of 16
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
Parts are packed in three cartons
Description: RH Mirror Door
Qty: 1
Carton No: 3/3
Description: RH Plain Door
Qty: 1
Carton No: 3/3
13 14
123
Description: Top Panel Description: LH Side Panel Description: RH Side Panel
Qty: 1 Qty: 1 Qty: 1
Carton No: 1/3 Carton No: 2/3 Carton No: 2/3
456
Description: Centre Upright Description: Base Panel Description: Plinth
Qty: 1 Qty: 1 Qty: 2
Carton No: 2/3 Carton No: 1/3 Carton No: 1/3
789
Description: Cross Plinth
Qty: 1 Qty: 1
Carton No: 1/3
Qty: 1
Carton No: 2/3
Description: Fixed Shelf
Qty: 2
Carton No: 1/3
Description: Back Rail
Qty: 4
Carton No: 1/3
10 11 12
Description: LH Mirror Door
Qty: 1
Description: Back Panel
Qty: 2
Carton No: 3/3
Description: LH Plain Door
Qty: 1
Carton No: 3/3 Carton No: 3/3

KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
Batch No. 151601
Page 5of 16
12
GNail for Fitting Back
(2x12mm)
Screw for Fitting Hinge,
Hanging Rail Support,
Back Panel & Anti-tilt
Strap (3.5x12.5mm)
48A
48B
20C
E121
8F
Item QuantityCode
Fittings (to scale)
Bolt for Fitting Handle
(M4x30mm)
Cam Lock
Dowe
8D
Carcass Screw for Fitting
Top Panel & Centre
Upright (M7x50mm)
l (8x30mm)
Cam Bolt
(35mm overall)
10 20 30 40 50 60 70 80
General Hints & Tips
A28mm
A
A
B
Tighten
Stop when
level
Panel

KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
Batch No. 151601
Page 6of 16
Fittings (not to scale)
QuantityCode
4N
1P
Q 4
8
2
R
T
Item
Support for
Hanging Rail
Hinge for Plain Doors
on LH & RH Sides
8V Hinge for Mirror Doors
in Centre of Wardrobe
Handle
1
U
Allen Key (4mm)
8
SDoor Buffer
Hanging Rail
Anti-tilt Wall Strap

Batch No. 151601
Page 7of 16
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
Fittings required
For this step:
Tools required
A x8
For this step:
Tools required
Tighten
BB x8
Fittings required
A x4
B x4
A
A
B
B
B
B
B
B
B
B
A
A
A
A
A
A
6x2
6
5
5
7
7
6
B
B
B
B
Tighten
B

Batch No. 151601
Page 8of 16
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
STEP 3
STEP 4
Fittings required
For this step:
Tools required
For this step:
Tools required
A
A
AA
A
A
A
AA
D
P
A
4
4
A
A
A x12
Fittings required
C x2
P
D x2
C
4
5

Batch No. 151601
Page 9of 16
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
STEP 5
STEP 6
Fittings required
For this step:
Tools required
For this step:
Tools required
Fittings required
A
A
A
A
A
A
A
A
A
AAA
A
B
B
B
C
C
C
C
C
C
C
C
B
B
BBB
B
BB
B
B
B
B
B
BB
B
B
B
AA
AA
AAA
2
2
3
8
8
9
9
9
9
3
A x24
C x12
A
A
A
A
Tighten
BC
B x36

Batch No. 151601
Page 10 of 16
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
STEP 7
STEP8
P
C
DD
D
D
D
C
C
For this step:
Tools required
Fittings required
C x6
D x6
P
1
10
10
10
10

Fittings required
For this step:
Tools required
E x16
Batch No. 151601
Page 11 of 16
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
STEP 9
STEP 10
Fittings required
For this step:
Tools required
E x8
Q x4
T x2
G x12
E
Q
T
T
T
E
G
G
E
E
E
10
10
TQ
E
E

Batch No. 151601
Page 12 of 16
STEP 11
Fittings required
For this step:
Tools required
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
E x16
V x8
11
14
12
13
E
EV
E
E
R
Fittings required
E x16
R x8
Plain Doors
Mirror Doors
NOTE:
CAREFULLY
SELECT HINGES
(R) or (V) TO SUIT
THE TYPE OF
DOOR

Batch No. 151601
Page 13 of 16
STEP 12
Fittings required
For this step:
Tools required
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
E x16
11
14
1
2
E
E
Fit Plain Doors in Position
Fit x2 screws (E) in
centre of long holes
Left or right
Up or Down
bc
a
In or Out
MAKE SURE WARDROBE IS LEVEL
IF DOORS NEED ADJUSTING, CAREFULLY FOLLOW THESE STEPS

Batch No. 151601
Page 14 of 16
STEP 13
Fittings required
For this step:
Tools required
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
E x32
12
13
1
2
E
E
Fit Mirror Doors in Position
Fit x2 screws (E) in
centre of long holes
Left or right
Up or Down
bc
a
In or Out
MAKE SURE WARDROBE IS LEVEL
IF DOORS NEED ADJUSTING, CAREFULLY FOLLOW THESE STEPS
Once all four doors are level,
(adjusting if necessary as per
the steps a, b & c), fix x2 more
screws (E) in the round holes,
to lock each hinge plate (V) or
(R) in it's final position.
E
E
Fittings required
E x16

STEP 14
Fittings required
For this step:
Tools required
Fittings required
STEP 15
For this step:
Tools required
KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
Batch No. 151601
Page 15 of 16
F x8
S x8
N x4
U
E
S
S
S
F
F
F
F
N
NN
N
E x1
U x1
Warning: Always ensure the wall area to be drilled is free of electrical
wires, water and gas pipes. We don't supply wall fixings as these must
suit the wall type of your own home. If in doubt please consult a
qualified tradesperson.
Note:We recommend the use of the Anti-tilt Wall Strap provided (U) to avoid
accidents and possible fatal injuries if the item falls over or tips over during use.

KESWICK 4 DOOR MIRROR ROBE ASSEMBLY INSTRUCTIONS
Assembly Completed
Your Keswick 4 door mirror robe is now completely assembled.
Periodically check to ensure that the components are in their proper position, free from damage.
Also, make sure the connectors are tight and secure.
Keep instructions for future reference
Batch No. 151601
Page 16 of 16