Gianni Industries EB-400 User manual

Statement
Dimensions
Vandal Resistant Circuitry
Auto-detective circuitry
Specification
The vandal resistant circuitry means the door position
sensor can't be fooled into projecting the electric dropbolt
unless the do or is actually closed. The reed sensor
automatically disconnects after the bolt is projected to
enhance security of the lock.
The unique intelligent logic circuit in GEM's electric
dropbolts keeps the bolt retracted until the door is properly
closed. This feature ensures the bolt will not extend if the door
is improperly aligned.
EB400 Surface Mount
Stainless Housing Electric Dropbolt
The EB400 electric dropbolt is designed for
surface mount application and this lock's housing
is made of stainless steel. Other functions are the
same as EB220.
Fail-Safe Version (Power to Lock)
Operating Voltage: 12 VDC
Voltage Tolerance: ±10%
Current Draw:Pull in: 0.9A, Holding: 0.3A/12VDC
(at 20°C)
Magnetic bolt status output (SPDT rated 3A/30VDC)
indicates bolt locked or unlocked status.
Operating Temperature: -10~+45°C
Humidity: 0~95% non-condensing.
Tested over 500000 cycles.
Built-in logical circuitry
Auto-relocking Time Delay : 0, 3 ,6 ,9 seconds
Full stainless steel housing
Net Weight:1.4 Kg
Unit: mm
39
220
171
49
38
22
160
42
Double Action Doors
EB400 Electric dropbolt is specially designed for use on
double swinging doors. They can also be installed on both
outswing and inswing doors.
Doubleswing Inswing Outswing
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-400 Ver. G Published on 2011.06.22
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw

GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
0 seconds 3 seconds 6 seconds 9 seconds
Relock time setting
The door position sensor can detect within a range of
5mm. If the door gap is too wide, a magnet within the strike
plate of the door can be adjusted to improve detection
accuracy.
45
5 mm maxi
Reed
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Horizontal or vertical installation Long life solenoids
Adjustable Sensor
The special designed solenoid aims for strength and long
life. The solenoid is guaranteed 500,000 times of operations.
Pull in
Holding
Current Draw (mA)
Time (seconds)
Wiring cable
Header
Door
Blind Nut
EB-400
Energy Saving Design
After the dropbolt is completely locked, the current draw
changes from 0.9A to 0.3A to prolong its life.
Adjustable Time Delay of 0,3,6,9 seconds with 2 way DIP
switch. (Default Value: 0 sec.)
Relock Time Delay
GIANNI INDUSTRIES, INC.
EB400 Surface Mount
Stainless Housing Electric Dropbolt
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-EB-400 Ver. G Published on 2011.06.22
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw