GILANI ENGINEERING 8088 User manual

Component
8088-24 Inch Wheel Assembly Instructions
s
Assembly Instruction
1.Take out all components from cartons.
Backrest Seat Plate Bucket Left and right Footrests*2
main frames
Front Upper Front lower Rear The sealing bag has Screws、24 Inch Wheels
Connecting Pipe Connecting Pipe Connecting pipe Locks、Allen Key and
Cap Nuts
1. Backrest
2. Armrest
3. PU Seat Cushion
4. Footrest
5. Lock
6. 24 Inch Wheel
7. Pull Pin
8. Hand Brake
9. Bucket
10. Brake Wheel

2.Install the main frame: Lock the left main frame and connecting pipes with
screws, cover with cap nuts. Install the right side in the same way as left.
Before Assembly
After Assembly
Screw
Cap nut
Screw
Screw
Cap nut
Cap nut
Rear Connecting Pipe
Front Upper
Connecting Pipe
Front lower connecting pipe

3.Install the seat plate: Fix the seat plate on to the main frame.
4. Install the bucket: Stuck the bucket into the bucket tubes.
5. Install 24" wheels: Thread the Ø12×155mm screw into the middle of the
wheel, press the screw head and install the screw to main frame.
6. Install the backrest: Install backrest to the top of main frame, fasten with the
Lock. Lay down armrest and fasten with pull pin.

7. Install the footrest: Install footrest onto clip tubes.
8. Installation completed.