Global Industrial 258321 User manual

1
INDUSTRIAL WALL FAN
WARNING
•
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
• This product contains chemicals which are
known to the state of California to cause
birth defects or other reproductive harm.
• Read and follow all instructions before
operating the product. Do not use the
product if any part is damaged or missing.
• Do not alter the product's assembly.
• All electrical connections should be made
by a qualified electrician. Installation
work and electrical wiring must be done
by qualified person(s) following all local
electrical and safety codes in the United
States and Canada, as well as the National
electrical Code (NEC) and the Occupational
Safety and Health Act (OSHA) in the United
States, and the Canadian Electric Code
(CEC) in Canada.
• Use OSHA approved lock-out tag-out
devices on power supply to prevent shock
and/or electrocution.
• When cutting or drilling into wall, do not
damage electrical wiring and other hidden
utilities.
do not expose to water or rain.
• To reduce the risk of fire or electrical shock,
do not use this product with any solid state
speed control device.
• To reduce the risk of fire or electrical shock,
do not use an extension cord, unit is
intended to be permanently hard wired to
properly rated electrical service outlet (120V
60Hz).
• To reduce the risk of injury to persons, install
product at least 7 feet (2.1m) above the floor
(8 feet in Canada).
•
.
• To reduce the risk of fire or electrical shock,
Automatically operated device - To reduce
the risk of injury, disconnect from power
supply before servicing.
4. Do not use the product in windows.
Rain and moisture may create electrical
hazard.
5. Disconnect the fan from its power source
when removing guards for cleaning.
6. This product is for indoor dry applications.
7. This product should not be operated
outside.
8.
9.
10.
The appliance does not apply to be used in
locations where special conditions prevail,
such as the presence of a corrosive or
explosive atmosphere ( dust, vapor or gas ).
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
READ & SAVE THESE INSTRUCTIONS
RULES FOR SAFE OPERATION:
1. Never insert fingers or any other objects
through the grill guard when product is
in operation.
2. If the power supply cord is damaged,
contact your local service centre or a
qualified electrician to install an
appropriate replacement cord to prevent
any injury or damage.
3. Disconnect the product from its power
source when removing guards for
cleaning.
MODELS
258321 / 258322
607050 / 607051

2
INDUSTRIAL WALL FAN
34
12

3
INDUSTRIAL WALL FAN
6
5

4
INDUSTRIAL WALL FAN
8
7

5
INDUSTRIAL WALL FAN
11
10
9