Goodwe GM1000D User manual

(GM1000D/GM3000/GM1000)
Quick Installation Guide
Smart Meter
V1.0 -2022-01-25

1
Quick Installation Guide V1.0-2022-01-25
CT
Indicators
Reserved Port
Reset Button
Product Introduction
01

2
Quick Installation Guide V1.0-2022-01-25
Packing List
Smart Meter x 1 Screwdriver x 1 USB Plug x N PIN terminal
x N[2]
[1]: For GM1000D and GM3000 only.
[2]: GM1000D x 8; GM1000 x 4; GM3000 x 6.
Installation and Cable Connection
1
1
24
5
3
6
Installation
02

3
Quick Installation Guide V1.0-2022-01-25
GM1000D
AC-Coupled
Inverter
Loads
Fuse 0.5A
Household
Meter Utility Grid
PV
Grid-Tied
PV Inverter
CT2
CT1
• Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
• CT direction: House (K)-->Grid (L).
Wiring System
03

4
Quick Installation Guide V1.0-2022-01-25
GM1000
Inverter
Loads
Fuse 0.5A
Utility Grid
Household
Meter
CT
• Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
• CT direction: House (K)-->Grid (L).
PV

5
Quick Installation Guide V1.0-2022-01-25
GM3000
CT
Inverter
Loads
Utility Grid
Household
Meter
Fuse 0.5A
• Recommended cable connected to the voltage input terminal: 1mm² (17AWG).
• CT direction: House (K)-->Grid (L).
PV

6
Quick Installation Guide V1.0-2022-01-25
Indicator
Type Status Description
Steady on Power on
O Power o
Steady on Purchasing from the utility grid.
Blinking Selling to the utility grid.
Blinking The communication is normal.
Blink 5 The meter is reseting
Reset Button
Press Time Description
< 3s Reset the smart meter.
5s Restory factory settings.
>10s Restory factory settings and clear the historical energy data.
Power ON
Step 1 Connect the smart meter cables.
Step 2 Power on the inverter and make sure that the inverter is working normally. Then the
smart meter is powered on.
Commissioning
04

7
Quick Installation Guide V1.0-2022-01-25
Model GM1000D GM1000 GM3000
Application Single-phase Single-phase Three-phase
Voltage
Nominal Voltage 110V/230V 3 x 230V/380V
Voltage Range 100V~240V
Frequency 50Hz/60Hz
Current Input Nominal Current CT in: 120A/40mA
Current Range 0.48A~120A
Self-Consumption <3W
Data Detection Current/Voltage/Active Power/Reactive Power/Power
Factor/Frequency
Energy Calculation Active/Reactive Power Energy
Precision
Voltage/Current Class I
Active Power Class I
Reactive Power Class II
Communication RS485(Bund Rate 9600/Modbus Protocol/
Communication cable max.length 100m)
Interface 3 LED (Power, Energy Consumption, Communication),
USB port, Reset button
Mechanical
Size (L x W x H mm) 36 x 85 x 66.5
Weight 360g 250g 450g
Protection Class IP20 (For indoor use)
Installation
Method Mounting rack
Operating Temperature -25 ~ +60° C
Operating Humidity <95%, No condensation
Altitude <2000m
Technical Parameters
05

8
Quick Installation Guide V1.0-2022-01-25
The module sold in the European market meets the following directives and requirements:
• Electromagnetic compatibility Directive 2014/30/EU (EMC)
• Electrical Apparatus Low Voltage Directive 2014/35/EU (LVD)
• Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863 (RoHS)
• Waste Electrical and Electronic Equipment 2012/19/EU
• Registration, Evaluation, Authorization and Restriction of Chemicals (EC) No 1907/2006
(REACH)
You can download the EU Declaration of Conformity on https://en.goodwe.com.
EU Declaration of Conformity
06

GoodWe Technologies Co., Ltd.
No. 90 Zijin Rd., New District, Suzhou, 215011, China
www.goodwe.com
[email protected]
Ocial Website
Local Contacts