Goodwe HK3000 Original operating instructions

Reset
USB
HK3000
Quick Installation Instruction
01 Packing List
02
Technical Data
NO.
1
2
3
4
5
Part
Power LED
Energy consumption LED
Communication LED
Reset button
USB port
Description
Normal status: ON
Consuming: ON
Steady on: Purchasing from the utility grid
Selling to the utility grid or communicates
well with HomeKit: Blinking
Blink once: detecting data transferring
Blink 5 times: Reset successfully
Press less than 3s: Meter Reset
Press 5s more or less: Meter Settings
Initialization
Press more than 10s: Meter Initialize
settings and Clear Energy Data
For after-sales maintenance.
Installation
Dimensions
1 x HomeKit 3000 (HK3000)
1 x Screwdriver
1 x Quick Installation Instruction
1 x WiFi Antenna
4 x Wiring Terminal
3 x Current Transformer (120A/40mA or 200A/66.7mA CT)
1 x USB Seal
NOTE
• HK3000 should be installed on a rail and should not be installed outdoors.
• When operating the meter, use insulation tools and wear
personal protective equipment
to ensure personal safety.
03 Product Overview
04 Equipment Installation
05 Cable Connections
06 APP Conguration
NOTE
• Search in Google Play/App Store or scan the QR code to download SolarGo
APP.
• Make sure the inverter is grid-tied.
• Establish communication between the inverter and SolarGo app via bluetooth
module or WiFi module, and ensure that the communication between them is
normal.
13
2
SolarGo APP
Ver 1.0
2021-04-06
HK3000
Household Loads Monitoring + ARCB
3*230V/400V
AC 100V~240V
50Hz/60Hz
0.04A~200A
< 5W
100M Ethernet
WiFi
3 LEDs (Power, Energy Consumption,
Communication), Reset Button
-25 ~ +60°C
-30 ~ +70°C
< 95%; No Condensation
< 2000m
Model
Application
Current Input Range
Self-Consumption
Rated Voltage
Voltage Range
Frequency
Voltage
Operating Temperature
Storage Temperatute
Operating Humidity
Altitude
Communication
Interface
Reset
SMARTMETER
USB
HOMEKIT
RS485+
Grid
HK3000
L1
L2
L3
N
RS485-
Inverter
Load
Meter
Fuse
PE
CT3
CT2
CT1
66.5mm
72mm
85mm
Reset
SMART METER
USB
HOMEKIT
HK3000 Conguration via SolarGo APP
Reset
USB
Reset
SMART METER
USB
HOMEKIT
1B(RS485-)
2A(RS485+)
3 -(CT3-)
4 +(CT3+)
5 -(CT2-)
6 +(CT2+)
7 -(CT1-)
8 +(CT1+)
9 N
10 L1 11 L2 12 L3
①
②
③
④
⑤
Reset
USB
HK3000 is designed as a three-phase meter with three-channel CTs to measure energy power at the grid point.
Together with the measurement of inverter output, you can calculate the household load.
Meanwhile, HK 3000 can upload the data to the cloud server in real time to conduct the measurement, statistics
analysis and management of electric energy at dierent loads. The data cannot be taken as the basis and standard
for electric charging by the grid power company.

NOTE
1
2
4
4
3
2
1
6
4
3
5
• Bluetooth: SOL-BLE********
• WiFi: SOL-WiFi********
• Initial Password for WiFi: 12345678
• * are the last 8 digits of the inverter SN
OR
6
Congure Failed
Congure Completed
HK3000 Network Configuratin and Monitoring via SEMS Portal
SEMS Portal APP
• Scan the QR code to download SEMS Portal APP.
• Connect HK3000 to the Ethernet properly via SEMS Portal.
• Log in using the initial password for the rst time and change the
password as soon as possible. To ensure the account security, you are
advised to change the password periodically and keep the new password
in mind.
Initial Password : 1234
Initial Password:12345678
Select WiFi or LAN as Internet Access Port. Switch o DHCP and manually input the IP address if you want to set a
specic static IP.
5
OR
5
6
7
8
7
9
10
8

11
Test
GoodWe Technologies Co.,Ltd.
No. 90 Zijin Rd., New District, Suzhou, 215011, China
www.goodwe.com
[email protected]om