GP MP10MA User manual

Operating instructions
Recharging the PowerBank
1. Connect the Micro-USB or USB-C
port of the PowerBank with a power
source (computer or USB power
adapter, output: 1A or above) through
the provided USB charging cable (see
gures below).
You can use the PowerBank to charge
other devices (using USB-A or USB-C
port) while it is being recharged (see
chapter “Charging other devices”).
2. Disconnect the USB charging cable
when all LED indicators are lit.
Charging other devices
1. Connect the fully-charged PowerBank
with the device through the provided
USB charging cable or the cable
provided by the device’s manufacturer.
Select USB-A or USB-C port, or use
all ports for charging simultaneously
(see gures below).
2. Disconnect the USB charging cable
when charging is complete. The
PowerBank will turn off automatically.
LED indicators
• Refer to the LED indicators for battery
level during charging or recharging. The
PowerBank has the best battery strength
when all LED indicators are lit. Before use,
the battery level can be checked by
pressing the power button once.
• Depending on the battery level, the last
applicable LED indicator ashes when the
PowerBank is being recharged and all
applicable LED indicators remain lit when it is
charging other devices. When the PowerBank
is being charged and charging another device
at the same time, the last applicable LED
indicator ashes.
Usage tips
• The USB-C port can detect whether the
connected device is a power source or
charging device and automatically switch
between the input and output modes. If
necessary, a manual switch between the
two modes is possible by pressing the
power button for 3 seconds.
• If the PowerBank does not work, unplug
the USB charging cable and reconnect it.
• It is normal that the PowerBank gets warm
during use. It will gradually cool down to
room temperature after fully discharged or
recharged.
6SHFL¿FDWLRQV
• Input : Micro-USB - DC 5V / 2A;
USB-C - DC 5V / 3A
• Output : USB-A x 2 - DC 5V / 2.4A;
USB-C - DC 5V / 3A (Total 3A)
• Dimension : 135.5(L)×70(W)×13.5(H)mm
• Weight : 233g
• Operating temperature : 5 °C to 40 °C
• Battery : Lithium Polymer 3.7V
5000mAh x 2pcs
• Recharging time : 4.5 hours via USB-C port
with 3A charger^
^ Recharging time may vary under different
operating conditions. Longer recharging
time may be required when using for the rst time.
Safety information
Please read below safety notes carefully before
use to avoid any personal injury and property
damage caused by improper use of the
product. Any warranty claims or returns
caused by misuses will not be accepted.
• Keep the product away from children and
inrm persons.
• Keep the product away from heat sources,
combustible gas, humidity and liquids.
• Do not attempt to repair, disassemble or
destroy the product in any way.
• Keep the product away from metallic or
conductive objects to avoid short-circuit.
• Do not operate a wet or otherwise damaged
product.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Read the instruction manual
thoroughly before use. Keep the
manual for future reference.
Power
button
LED
indicators
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information
regarding the collection systems available. If
electrical appliances are disposed of in landlls or
dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.
GB
Micro-USB
(input)
USB-C
(input/output)
USB-A
(Output)
USB-A
(Output)
MP10MA PowerBank
Instructin Manual

MP10MA PowerBank
Manuel d’instruction