GPM BENLAN User manual

GLOBAL PROCUREMENT AND MARKETING LIMITED
1
TABLE WITH 2 BENCH SET
Assembly Instructions – Please keep for future reference BENLAN
Dimensions
No. people
Assembly Time
SKU #
Width:
80
cm
15 mins
(approx.) BENLAN
Depth:
32
cm
Height:
43.5
cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]

2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
•Check you have all the
components and tools listed
on pages 4 and 5.
•Remove all fittings from the
plastic bags and separate
them into their groups.
•Keep children and animals
away from the work area,
small parts could choke if
swallowed.
•Make sure you have enough
space to lay out the parts
before starting.
•Do not stand or put weight on
the product, this could cause
damage.
•Assemble the item as close to
its final position (in the same
room) as possible.
•Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
•We do not recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit.
Only use hand screwdrivers.
•Dispose of all packaging
carefully and responsibly.
Care and Maintenance
•Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
•From time to time check that there
are no loose screws on this unit.
•This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

3
Exploded View
If you have damaged or missing components,
email: [e-mail]
x 2

4
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No Description Qty
Size
(mm)
Thickness
(mm)
8
TOP PANEL
1
800X320
15
9
SIDE PANEL
2
420X300
15
10
SUPPORT PANEL
1
710X200
15
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]

5
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
(A)
X14
(B)
X14
(C)
X16
(D)
(E)
(F)
(G)
X8
(H)
X8
(I)
X8
(J)
(K)
(L)
(M)
(N)
(O)
(P)
(Q)
(R)
(S)
(T)
(U)
(V)
(W)
(X)
Tools Required
Ruler – Use this to measure your screws (mm)
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]
5*50mm
、炀

6
Assembly Instructions
If you have damaged or missing components,
email: [e-mail]

GLOBAL PROCUREMENT AND MARKETING LIMITED
1
TABLE WITH 2 BENCH SET
Assembly Instructions – Please keep for future reference DINLAN
Dimensions
No. people
Assembly Time
SKU #
Width: 110cm
45 mins
(approx.) DINLAN
Depth: 70cm
Height: 73cm
Important
– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]

2
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
•Check you have all the
components and tools listed
on pages 4 and 5.
•Remove all fittings from the
plastic bags and separate
them into their groups.
•Keep children and animals
away from the work area,
small parts could choke if
swallowed.
•Make sure you have enough
space to lay out the parts
before starting.
•Do not stand or put weight on
the product, this could cause
damage.
•Assemble the item as close to
its final position (in the same
room) as possible.
•Assemble on a soft, level
surface to avoid damaging the
unit or your floor.
•We do not recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit.
Only use hand screwdrivers.
•Dispose of all packaging
carefully and responsibly.
Care and Maintenance
•Only clean using a damp cloth and
mild detergent, do not use bleach or
abrasive cleaners.
•From time to time check that there
are no loose screws on this unit.
•This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
If you are unhappy with the product and wish to return it,
please follow the retailer’s returns procedure.

3
Exploded View
If you have damaged or missing components,
email: [e-mail]

4
Components - Panels
Please check that you have all the components listed below before constructing your item.
Part No Description Qty
Size
(mm)
Thickness
(mm)
1
TOP PANEL
1
1100X700
15
2
SHORT SUPPORT PANEL
2
580X100
15
3
LONG SUPPORT PANEL
2
1008X100
15
4
WIDE LEG
2
715X115
15
5
NARROW LEG
2
715X100
15
6
WIDE LEG
2
715X115
15
7
NARROW LEG
2
715X100
15
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]

5
Components - Fixings
Please check that you have all the components listed below before constructing your item.
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
(A)
X22
(B)
X22
(C)
X22
(D)
X32
(E)
X8
(F)
X16
(G)
X8
(H)
X8
(I)
X4
(J) (K) (L)
(M) (N) (O) (P)
(Q) (R) (S) (T)
(U) (V) (W) (X)
Tools Required
Ruler – Use this to measure your screws (mm)
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please email [email protected]
If you have damaged or missing components,
email: [e-mail]
6*20mm

6
Assembly Instructions
If you have damaged or missing components,
email: [e-mail]

7
6*20 mm