Graco 208390 User manual

Instructions–Parts List
307068V
EN
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
Nickel-Plated Steel and Aluminum, PTFE Seals
Low-Pressure Ball Valves
500 psi (35 bar, 3.5 MPa) Maximum Fluid Working Pressure
NOTE: npsm threaded ends meet SAE J516 fitting recommendations.
Table of Contents
List of Models 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nickel–Plated Steel, PTFE Seals 1. . . . . . . . . . . . .
Aluminum, PTFE Seals 1. . . . . . . . . . . . . . . . . . . . . .
Warnings 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco Standard Warranty 4. . . . . . . . . . . . . . . . . . . . . .
Graco Information 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Models
Nickel-Plated Steel, PTFE Seals
Model No. Series Thread
208390 A1/4 npt(m) x 1/4 npt(m)
208391 A3/8 npt(m) x 3/8 npt(f)
208392 A3/8 npt(f) x 1/4 npt(m)
208393 A3/8 npt(m) x 3/8 npt(m)
208475 B3/8 npt(f) x 1/4 npsm(m)
208476 B3/8 npt(f) x 3/8 npsm(m)
208630 A3/8 npt(f) x 1/2 npt(m)
218109 B3/8 npt(m) x 3/8 npsm(m)
Canadian Registration Number (CRN):
Alberta – 0C04874.52
Ontario – 0C4874.5R1
Aluminum, PTFE Seals
Model No. Series Thread
224754 A1/4 npsm(m) x 1/4 npsm(f)
left-hand thread

2 307068
Warnings
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin
and cause serious injury.
To reduce the risk of splashing follow the pressure relief procedure for your equipment before
removing the valve.
Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and
result in serious injury.
DThis equipment is for professional use only.
DRead all instruction manuals, warnings, tags, and labels before operating the equipment.
DUse the equipment only for its intended purpose. If you are uncertain about usage, call your
Graco distributor.
DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.
DCheck the equipment daily. Repair or replace worn or damaged parts immediately.
DNever exceed the recommended working pressure of the lowest rated system component. This
equipment has a maximum fluid working pressure of 35 bar, 3.5 MPa (500 psi).
DUse only fluids and solvents that are compatible with the equipment wetted parts. See the
Technical Data sections of all the equipment manuals. Read the fluid manufacturer’s warnings.
DAlways wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid
and solvent manufacturers.
DComply with all applicable local, state and national fire, electrical and other safety regulations.

3307068
Notes

4 307068
Graco Standard Warranty
Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the
date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,
Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be
defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written
recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or
substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the
date of sale.
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection
with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured
by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide
purchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties
reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis etprocédures
judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.
Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the distributor closest to you:
Phone: [phone] or Toll Free: 1–800–328–0211 Fax: [phone]
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Originallinltrultionl. This manual contains English. MM 3007068
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES SP.O. BOX 1441 SMINNEAPOLIS MN 55440–1441 SUSA
Copyright 1971, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revised June 2019