Safety Precautions
During a plotting or cutting operation, do not touch
the writing panel, carriage, and other moving parts.
•Such action may cause human injury.
During a plotting or cutting operation, be sure to
keep your hands, hair, and so forth away from the
writing panel, carriage, and other moving parts.
•Such action may cause human injury.
Even when the plotter is stopped, it may suddenly
start operating if it receives data, so be sure to keep
your hands, hair, and so forth away from the vicinity
of the plotter's writing panel and moving parts such as
the pen carriage.
•Such action may cause human injury.
If the plotter generates smoke, is too hot, emits
strange odor, or otherwise functions abnormally, do
not continue using it. Turn off its power and unplug
its power cord from the electrical socket.
•Useoftheplotterinsuchstatusmayresultinarehazardor
electrical shock.
•Afterconrmingthatsmokeisnolongerbeinggenerated,
contact your sales representative or nearest Graphtec vendor
to request repair.
•Never try to perform repair yourself.
Repair work by inexperienced
personnel is extremely dangerous.
Do not connect the plotter to a non-rated power
supply.
•Use of a different supply voltage may result in electrical shock
orarehazardduetocurrentleakage.
Make sure that the plotter is grounded.
•If the plotter is not grounded, the operator could suffer an
electrical shock in case of current leakage.
Do not disassemble, repair, or remodel the plotter.
•Suchactionmaycauseelectricalshockorarehazarddue
to current leakage.
•Contact with the high-voltage parts within the plotter may
cause electrical shock.
•If the plotter requires repair, contact your sales representative
or nearest Graphtec vendor.
Do not use the plotter in a location where it will be
exposed to water, rain or snow.
•Suchlocationmaycauseelectricalshockorarehazarddue
to current leakage.
Beware of
electrical shock
