GreenTec FOX Guide

FOX MULTI CARRIER
1

FOX MULTI CARRIER
2
FOX MULTI CARRIER
CONGRATULATIONS ON YOUR NEW GREENTEC
MACHINE!
1. THIS DOCUMENT MUST ALWAYS FOLLOW THE MACHINE AND BE READ BEFORE
USING THE MACHINE!
2. WHEN SELLING THE MACHINE, THIS DOCUMENT MUST ALWAYS BE HANDED TO THE
NEW OWNER!
3. WRONG USE OF THE MACHINE MAY RESULT IN DISABLING DAMAGE, SERIOUS
BODY DAMAGE, AND DAMAGE TO MACHINE OR EQUIPMENT IF THE INSTRUCTIONS
ARE NOT FOLLOWED EXACTLY!
4. THE INFORMATION IN THIS DOCUMENT MUST BE REVIEWED BEFORE START-UP AS
IT CONTAINS SPECIFIC OR GENERAL INFORMATION WHICH IS CONSIDERED
IMPORTANT OR USEFUL FOR THE USER AND THE MACHINE!
5. ALWAYS READ THIS DOCUMENT AND THE GREENTEC MACHINE INSTRUCTION
MANUAL CAREFULLY BEFORE USING THE MACHINE!
Before using the machine for the first time, it is crucial that the operator fully understands the
instructions and functions of the GreenTec FOX Multi Carrier including the GreenTec attachment tool
used to:
•Avoid accidents, personal injury and equipment damage.
•The operator quickly and easily learns to operate the machine correctly.
•The owner of the machine quickly and easily gets the machine assembled and mounted
correctly.
For proper operation, this GreenTec FOX Multi Carrier must be mounted on an approved vehicle with
an approved GreenTec attachment tool.
Our machines are constantly under continuous development and improvement, and it must be
expected that there might be continuous changes in the specifications and in the technical
documentation for our machines.
It is therefore important for GreenTec that instruction manuals, spare parts books and other technical
documentation are always updated and available in the latest version for our users.
The technical documentation of the machine and its contents are based on information, selected
standards and regulations, applicable at the time of release. (See Declaration of conformity –page 5)
To access your GreenTec FOX Multi Carrier’s latest edition of instruction manual, spare parts book,
and other relevant technical documentation - scan the QR code below:

FOX MULTI CARRIER
3
YOUR TECHNICAL DOCUMENTATION: ALWAYS AT HAND!
When scanning the QR code, it always links to the updated and latest technical documentation for
your GreenTec machine.
•Your preferred language can always be selected via the flag at the top right of the website:
The QR code is also affixed to your GreenTec machine, and from here you can always get quick access
to all relevant technical documentation for the machine:
If desired, it is always possible to print our technical documentation in a physical
copy for your own use, or to download these as a digital copy via our website:
https://greentec.eu/en/extranet/spareparts/
The technical documentation for your GreenTec machine can at any time be
requisitioned by contacting GreenTec - Aftersales & Service:
[email protected] - We are happy to send both electronic and
physical copies!

FOX MULTI CARRIER
4
USE OF GREENTEC QR CODES
1. SMARTPHONE OR TABLET?
Most newer devices have a pre-installed app for scanning QR codes.
If your phone already has an app for scanning QR codes; proceed to point 3 below.
If not, a third-party app must be installed on your smartphone or tablet that can scan the QR code on
the machine:
•The application must have access to your camera to work.
•There must also be access to the internet.
2. DOWNLOAD APR FOR SCANNING QR CODE:
Open your favorite device (Apple or Android)
Access either App Store: (Apple-devices), or Play Store: (Android-devices)
Search for: "QR scanner". Select and download your favorite app.
3. USE OF QR CODE SCANNING APP:
Launch the app to scan QR codes on your device.
Hold your smartphone / tablet over the code, in the same way as
that you would take a picture with the device. The code is then scanned.
After scanning the code, you will be taken to a link
Example: https://qrco.de/bc8ZUl
•Open the link to see all relevant technical documentation for your
GreenTec machine on our website.

FOX MULTI CARRIER
5
DECLARATION OF CONFORMITY (c)
ACC. TO MACHINERY DIRECTIVE 2006/42/EC, ANNEX II.A
MANUFACTURER: GreenTec A/S
COMPANY ADRESS: Merkurvej 25
ZIP-CODE AND CITY: DK-6000 Kolding
We, GreenTec A/S, declare under all responsibility that the machine:
TYPE:
PRODUCT:
CAN BE MOUNTED ON:
FOX Multi Carrier
FOX
(9991902C-25, 9991902C-40)
Barrier Mower RI 60 & 80
Weed Clearing Brush BR 70
Table 1 –Machines covered by declaration of conformity
has been manufactured in accordance with the Machinery Directives 2006/42 / EC and 2014/68 / EU of
the European Parliament and of the Council with reference to the following standards associated with its
design, construction, and production:
NAME:
DECRIPTION:
DS/EN ISO 12100:2011
Machine safety - General principles for design - Risk assessment and risk
reduction
DS/EN 14120:2015
Safety of machinery - Guards - General requirements for the design and
construction of fixed and movable guards
DS/EN ISO 4413:2010
Hydraulic fluid power –General rules and safety requirements for systems
and their components.
Table 2 –Declared international standards
The declaration is valid for the above equipment, up to and including the machine's connections, resp.
suspension and stabilization, power transmission and electrical connection.
When connecting the above equipment to a vehicle and/or to tools other than those mentioned above, it is
the responsibility of each owner and operator to ensure that the vehicle and the overall machine comply with
the applicable requirements of relevant directives.
Date: 09.07.2019
Signature: ___________________________
John Christensen
Owner GreenTec A/S

FOX MULTI CARRIER
6
Merkurvej 25
DK 6000 Kolding
Danmark
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Webadresse: www.greentec.eu
Åbningstid: mandag-fredag 8-16
1. MASCHINE DATA, USEFUL INFORMATION (b)
Before the machine is used for the first time, the importer / dealer is responsible for ensuring that the buyer
receives all documents associated with the machine and that the machine is registered correctly via the
extranet on GreenTec's website:
•https://greentec.eu/user
If in doubt regarding login information, please contact GreenTec - Aftersales & Service:
•[email protected]
The dealer / importer must also make sure that the buyer and operator fully understand the contents before
using the machine.
If the machine is resold, all the technical documentation provided must be handed over to the new owner
and must always follow the machine.
The following fields are filled in, for use when ordering spare parts or other inquiries:
1.1 REGISTRATION OF GREENTEC MACHINE DATA
! THESE DATA MUST ALSO BE ENETERED VIA LOGIN IN GREENTEC EXTRANET !
Maskinens
betegnelse:
Serial number:
Date of delivery:
Importer / dealership:
E-mail:
Telephone:
Table 3 –Machine data form
DEALER STAMP

FOX MULTI CARRIER
7
1.2 MANUFACTURERS PLATE
All GreenTec machines are equipped with a
manufacturer’s plate.
The manufacturer’s plate contains
important information related to the
machine, including a unique serial number
used for identification.
CONTENT OF MANUFACTURER’S PLATE:
Type:
Machine model and type number.
Serial No.:
The machines unique serial number.
Prod. year:
Production year of the machine.
Weight:
Weight without optional equipment. (kg)
Model year:
Development year of the machine.
The plate also indicates the address information of the manufacturer.
Table 4 –Contents of the manufacturer’s plate
1.3 WARRANTY
To maintain GreenTec's 2-year warranty and product liability insurance, only genuine GreenTec spare parts
may be used on GreenTec machinery and equipment.
GreenTec is not liable for damage caused by illegal or incorrect use of the machine as well as incorrect
connection or connected equipment.
See GreenTec's warranty conditions in section 5 under the Terms and Conditions of Sale and Delivery
here: https://greentec.eu/en/terms-and-conditions-sale-and-delivery/
1.4 USE WITH OTHER MANUFACTURERS THAN GREENTEC
When installing attachment tools other than GreenTec, a new risk
assessment of the equipment used must be submitted.
If the multi carrier is fitted with an unapproved attachment tool, the risk
assessment basis lapses, and thus the validity and guarantee of the
declaration of conformity.
It is the sole responsibility of each operator to assess the risk of this
interconnection before using the machine.
Figure 1 –Manufacturer’s plate for GreenTec machines

FOX MULTI CARRIER
8