GreenTech pureAir PERSONAL User manual

UNIT DIAGRAMS
FRONT:
REAR:
BOTTOM:
SPECIFICATIONS
Model: 1X5278
Dimensions: 75 mm L x 54 mm W x 27 mm D
Weight: 2.16 oz (61.2g)
Battery Type: Rechargeable Lithium
Battery Life: 28 hours (After 5 Hour Charge)
Ion Density: 50 Million Ions/cc
Ozone Output: Less than .03 ppm
Accessories:
• Leather Lanyard
• Carrying Case
• Micro USB Charging Cable (Wall Adapter Not
Included)
CAUTIONS
CAUTION: Avoid using any liquid (besides isopropyl
or rubbing alcohol) to clean the unit. Getting your
unit’s internal components wet will permanently
damage the unit, rendering it useless and will void
the warranty.
CAUTION: Sticking anything into the Purification
Output Nozzle (the round opening in the grill) will
permanently damage the emitter, rendering the
unit useless and will void the warranty.
SAFETY INSTRUCTIONS
This product complies with the maximum allowable
concentration of ozone of 0.050 parts per million by
volume (ppmv) in a 24 hour period.
GETTING STARTED
NOTE: The unit operation is not always noticeable;
to make sure it is working, raise it to your face to
feel a slight breeze emitting and a slight purification
smell. If you feel nothing but your blue light is on,
see the Maintenance section of this manual for
support info.
NOTE: For optimal performance, be sure to use the
neck strap instead of attaching the clip to your shirt
or pocket. The unit will need to have a centered
placement to ensure your breathing space is
completely covered.
UNIT POWER:
• To turn the unit ON, slide the Power Switch UP.
• To turn the unit OFF, slide the Power Switch DOWN.
OPERATION LED
NOTE: The Operation LED will only work when the
unit is on.
• Press the Operation LED Power Button to turn the
LED ON or OFF.
NECKLACE CLASP
WARNING: This necklace does not have a
breakaway safety feature and represents a
strangulation hazard to children as cords may
become wrapped around a child’s neck. To avoid
strangulation and entanglement, keep cords out of
the reach of young children.
1. To connect, insert
the male end of the
clasp into the female
locking clasp until
you hear a click.
2. To release, press
down on raised end
of the locking clasp’s
tab and pull on the
male end.
CHARGING
• Plug your USB Charging Cable into the Charging
Port located on the bottom of the unit.
NOTE: A small red light will appear inside the Air
Intake on the rear of the unit to show that the unit
is charging. This light will turn OFF once charging in
complete.
OPERATING INSTRUCTIONS OF USB
SUPPLY SOURCE
A) That the product is not to be operated by any
supply sources other than those specified in (B);
and
B) That the product is to be used only with the
following products:
1) information and communication technology
Equipment; or
2) A Class 2 Power Unit.
Purification Output
Nozzle
Power Switch
Operation LED
Power Button
Necklace Clip
Air Intake
Micro USB
Charging Port

WARRANTY
Your pureAir PERSONAL Personal Air Purifier is
warranted to be free from all defects in material and
workmanship in normal household use for a period of
1 Year from date of purchase.
For more warranty information and to register your
product visit: greentechenv.com/warranty
w: greentechenv.com t: 800.957.1136
CLEANING NOTES
CAUTION: Sticking anything into the Purification
Output Nozzle (the round opening in the grill) will
permanently damage the emitter, rendering the
unit useless and will void the warranty.
CAUTION: Avoid using any liquid (besides isopropyl
or rubbing alcohol) to clean the unit. Getting your
unit’s internal components wet will permanently
damage the unit, rendering it useless and will void
the warranty.
A buzzing noise is not uncommon and is caused
by contamination on the ionizer electrode. This can
typically be stopped by a quick blast of air from
your mouth or from canned air into the top of the
unit. Regular cleaning and maintenance should
also be followed as some contaminants require the
use of alcohol to remove.
CLEANING INSTRUCTIONS:
1. Turn the unit OFF and remove it from your neck.
2. Spray a small amount of isopropyl or rubbing
alcohol directly onto the Grille and into the
Purification Output Nozzle, which are the plate
and round opening on the top of the unit. Allow to
work for 30 seconds.
3. Use canned air or blow into the top of the unit
to dislodge the particulates which adhere to the
ionizer electrode.
This unit requires no maintenance, other than
the suggested monthly cleaning. If you are
experiencing any technical issues, please visit our
website and submit a contact form or call us.
4.Vacuum the Purification Output Nozzle and Air
Intakes.
pureAir PERSONAL
Owner’s Manual
Wearable Air Purification