GreenTech pureAir Solo User manual

MAINTENANCE
CLEANING NOTES
CLEANING INSTRUCTIONS
Owner’s Manual
1. Turn the unit OFF and remove it from your neck.
2. Spray a small amount of isopropyl or rubbing alcohol
directly onto the Grille and into the Purication Output
Nozzle, which are the plate and round opening on the top
of the unit. Allow to work in for 30 seconds.
3. Use canned air or blow into the top of the unit to dislodge
the particulates which adhere to the ionizer electrode.
4. Vacuum the Purication Output Nozzle and
Air Intakes
A buzzing noise is not uncommon and is caused by
contamination on the ionizer electrode. This can typically be
stopped by a quick blast of air from your mouth or from
canned air into the top of the unit. Regular cleaning and
maintenance should also be followed as some contaminants
require the use of alcohol to remove.
To maintain proper operation, and avoid damage to the unit,
please follow all cleaning instructions on the next page.
CAUTION: Sticking anything into the Purication Output
Nozzle (the round opening in the grill) will permanently
damage the emitter, rendering the unit useless and will void
the warranty.
CAUTION: Avoid using any liquid (besides isopropyl or
rubbing alcohol) to clean the unit. Getting your unit’s
internal components wet will permanently damage the unit,
rendering it useless and will void the warranty.
This unit requires no maintenance, other than the
suggested monthly cleaning. If you are experiencing any
technical issues, please visit our website and submit a
contact form or call us.
www.GreenTechEnv.com
or
1-800-957-1136
To maintain proper operation, and avoid damaging the unit,
follow these instructions.
WARRANTY INFORMATION
Your pureAir SOLO Personal Air Purier is warranted to be free from all defects in
material and workmanship in normal household use for a period of 1 Year from date of
purchase. The warranty is granted only to the original purchaser and members of his or
her immediate household. The warranty is subject to the following provisions. Any
damage or malfunctions caused by negligence, abuse, or use not in accordance with the
Owner’s Manual are not covered by this warranty. Likewise, any defects or damages
caused by unauthorized service are not covered. GreenTech Environmental will, at its
option, repair or replace a defective Air Purier that is covered by this warranty. As a
matter of policy, GreenTech will not refund the customer’s purchase price. To obtain
warranty service you must return the defective Air Purier along with proof of purchase
to the GreenTech Authorized Warranty Station. All transportation charges on parts, or
units, submitted under this warranty shall be borne by the purchaser. Unless this
warranty is expressly renewed or extended by GreenTech, any repaired or replaced part
of the unit shall be warranted to the original purchaser only for the length of the
unexpired portion of the warranty.
Visit www.GreenTechEnv.com/warranty to register your pureAir SOLO.
FURTHER LIMITATIONS AND EXCLUSIONS ARE AS FOLLOWS:
Any warranty that may be implied in connection with your purchase or use of the Air
Purier, including any warranty of merchantability or any warranty for Fitness For A
Particular Purpose is limited to the duration of this warranty. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitations may not
apply to you.
Your relief for the breach of this warranty is limited to the relief expressly provided
above. In no event shall GreenTech be liable for any consequential or incidental
damages you may incur in connection with your purchase or use of the Air Purier. Some
states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives you
specic legal rights, and you may also have other rights which vary from state to state.

Air Intakes
Necklace Clip Purification Output NozzleGrille
Necklace Clip
Charging Port
Power Button
UNIT DIAGRAMS
REAR
UNIT DIAGRAMS
TOP/BOTTOM
GETTING STARTED
SAFETY INSTRUCTIONS
TOP
BOTTOM 1. Place your Necklace through the Necklace Clip on the back
of the unit.
2. Press the Power Button on the back of your unit to turn the
unit ON or OFF.
This product complies with the maximum allowable
concentration of ozone of 0.050 parts per million by
volume (ppmv) in a 24 hour period.
BATTERY CHARGING
1. With the unit in the OFF position, place the supplied
Micro USB Cable into the Charging Port on the bottom of
the unit and the other end into your wall charger or
powered USB port.
2. The Power Button will light up Red when charging and
will turn Green once the unit is fully charged.
OPERATING INSTRUCTION OF
USB SUPPLY SOURCE
A. The product is not to be operated by any supply
sources other than those specied in (B).
B. The product is to be used with only the following
products:
1. Information and communication technology equipment.
2. A Class 2 Power Unit
NOTE: For optimal performance, be sure to use the neck strap instead of attaching
the clip to your shirt or pocket. The unit will need to have a centered
placement to ensure your breathing space is completely covered.
NOTE: The unit operation is not always noticeable; to make sure it is working, raise it
to your face to feel a slight breeze emitting. If you feel nothing but your blue
light is on, see the Maintenance section of this manual.
SPECIFICATIONS
Model:
1X5260
Dimensions:
49 mm W x 75 mm H x 17 mm D
Weight:
2.22 oz (64g)
Battery Type:
Rechargeable Lithium
Battery Life:
28 hours (After 5 Hour
Charge)
Charging Cable:
Micro USB
(Wall Plug Not Included)
Accessory:
Breakaway Necklace
Ion Density:
50 Million Ions/cc
Ozone Output:
Less than .03 ppm