Greentouch Canterbury 1227VB-72-201 User manual

( 72-IN W x 22-IN D x 35-IN H)
72-IN Vanity Base and Top
Date Purchased _______________________
Questions, problems, missing parts?
Before returning to your retailer,
call our customer service department at
1-855-571-1044 9 a.m. - 5 p.m., EST, Monday-Friday.
www.greentouchhome.com
Canterbury Bathroom Vanity

2
2550VT-72-903 72" Engineered Carrara Top with Backsplash
1227VB-72-201 72" White Finish Vanity Base & Sink
1227VB-72-202 72" Mahogany Finish Vanity Base & Sink
1227VB-72-240 72" Black Birch Finish Vanity Base & Sink
1227VB-72-242 72" Light Grey Finish Vanity Base & Sink
2550VT-72-900 72" Carrara Marble Top with Backsplash
2550VT-72-901 72" Engineered White Top with Backsplash
MODEL NUMBER DESCRIPTION
2550VT-72-904 72" Black Granite Top with Backsplash
2550VT-72-905 72" Terrazzo Top with Backsplash

3
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
PACKAGE CONTENTS
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• Some steps are more easily handled with 2 adults.
CAUTION
• Use care when assembling the vanity; take your time and follow the assembly instructions closely.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
II
Touch Up Pen
Qty. 1
PART DESCRIPTION QUANTITY
A Vanity 1
B Top 1
C Backsplash 1
D Sink 2
E
Top Drawer
(preassembled
to Vanity(A)) 2
F
Bottom Drawer
(preassembled
to Vanity(A)) 2
CARTON
Box 2 of 2
Box 2 of 2
Box 1 of 2
Allen Wrench
Qty.1
JJ
C
A
E
F
B
D
D

4
INSTALLATION INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
1. To remove drawers (E,F) preassembled in
vanity (A). Fully extend drawers, locate plastic
levers on metal glide tracks at left and right sides
of drawer box, push on plastic levers on both
sides at the same time, to disengage drawer
box from the glides, Then gently lift the drawer
up to remove it from the glide tracks.
2. Clean area where the vanity (A) will be
permanently located prior to beginning
installation, ensuring the vanity (A) will not
interfere with any water supply and drain lines
once mounted.
Locate wall studs and mark locations. With the
help of another adult, place completed Vanity
Cabinet Assembly to its final location. Adjust
the height of the Vanity Cabinet (A) by
twisting the adjustable leveler foot pins on the
bottom of each leg. Twist clockwise to
decrease height or twist counter-clockwise to
increase vanity height.
1
E
F
12
2
Note: The vanity (A) is preassembled for easy
installation purpose. But the assembly might
become loss and unstable after transportation.
Please use the allen wrench (JJ) (Included in the
hardware bag) to tighten all the bolts on the
inside of the legs and shelf before mounting it to
the wall.

5
INSTALLATION INSTRUCTIONS
3. Using hardware appropriate for your wall type
(not included), secure Vanity Cabinet (A) to
two wall studs anywhere through the Vanity
Mounting Plates. Be careful not to disturb
any electrical or water lines that may be
concealed in the wall.
4. To install the top with sink to the vanity (A).
Apply silicone caulk to the top edge of the
wood cabinet. With the help of another adult,
gently lower the stone top with assembled sink
onto the cabinet. Make sure the stone top is flush
with the back side of the wood cabinet and the
stone overhang is equal on both sides over the
wood cabinet left and right side walls. Remove
any excess caulk before allowing to dry.
Tip: it may be easier to install the faucet and/or
drain assembly (not included) before
securing the stone top to the wood cabinet.
WARNING
Vanity (A) MUST be secured to the wall.
41
2
2
A
B
3

6
INSTALLATION INSTRUCTIONS
5. Locate Top drawer (E)and Bottom drawer (F)
and set aside. Fully extend lower drawer glide
tracks. With the help of another adult, hold the
extended glide in one hand and the drawer in
the other. Gently place the back of the drawer
box into the metal hook located on the back
of the drawer track. Once the glide hook has
been slide into the hole in the back of the
drawer box, gently lower the drawer box down
onto the extended glide tracks. At the same
time depress both of the glide handles and
allow the drawer box to fully rest on the glide
tracks. Test to see if the drawer box is fully
engaged. If the drawer box can still be lifted
off the glide track then start again from the
beginning. Never force anything or else
damage to the drawer or glide hardware could
result. Repeat for both drawers. The drawers
location can be adjusted slightly up or down
by twisting the adjuster knob next to the glide
handles.
6. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
if not already done at step 4. Per the
manufacturers’ instructions to complete the
installation.
5
6
C
B
1

7
CARE AND MAINTENANCE
WARRANTY
IMPORTANT
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The ceramic sink can be cleaned using standard ceramic cleaning agents available at your local
supplier.
• Tips for using touch-up pen (II): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.
• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble,
engineered stone). Stone tops will vary from product to product. Use caution placing items
such as soap or any fragranced material on the stone surface. Use a soap dish, coaster or
similar item to protect the surface if placing any soap or fragranced products on the stone.
• If soap or fragranced products come in contact with the stone top, rinse the surface with water
and dry using a soft non-abrasive cloth.
• WARNING: Must use cleaning agents safe for stone. Check your cleaning agents use
restrictions before using on any stone. Damage to the stone may result. Vanity Manufacturer not
responsible for damage caused by improper cleaning agents or soaps used. Warranty will not
cover damage caused by the use of improper soaps or cleaning agents.
• DO NOT use products to clean the stone top that contain acetone, lemon, vinegar or other
acids as these may cause damage to the stone surface.
• Periodically reseal the stone top using an appropriate stone sealer available from your local
home store. Follow the manufacturer’s directions on how to apply.
The manufacturer warrants this item against defects in materials and workmanship for a period of
one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
modified, improper installation or by affixing accessories not produced by the manufacturer. The
manufacturer will not be held liable for damages caused from cleaners or soaps that etch or stain
the stone top. The manufacturer is not accountable whatsoever for product installation during the
warranty period. There is no further expressed warranty. The manufacturer shall not be legally
responsible for incidental, consequential or special damages arising at or in connection with
product use or performance except as may otherwise be accorded by law. The manufacturer
disclaims any and all implied warranties.

8
REPLACEMENT PARTS FOR 1227VB-72-201
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
D Sink PU17-18x14-SQUARE
G Drawer Front 1227VB-72-201-001
H Leg PU17-1227-201-LEG
I Shelf 1227VB-72-201-002
J Mid-Center Leg 1227VB-201-003
K Mid-Back Leg 1227VB-201-004
II Touch Up Pen OF-0010
JJ Allen Wrench PU16-5-AW
HH Leveler T-1007
FF Drawer Glide PUDTC-14x3-Handle
GG Drawer Handle CF-32-003-BN
K
J
D
G
I
H
JJIIHHGGFF

9
REPLACEMENT PARTS FOR 1227VB-72-202
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
D Sink PU17-18x14-SQUARE
G Drawer Front 1227VB-72-202-001
H Leg PU17-1227-202-LEG
I Shelf 1227VB-72-202-002
J Mid-Center Leg 1227VB-202-003
Mid-Back Leg 1227VB-202-004K
Touch Up PenII W3350A
HH Leveler T-1007
FF Drawer Glide PUDTC-14x3-Handle
GG Drawer Handle CF-32-003-BN
JJ Allen Wrench PU16-5-AW
K
J
D
G
I
H
JJIIHHGGFF

10
REPLACEMENT PARTS FOR 1227VB-72-240
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
D Sink PU17-18x14-SQUARE
G Drawer Front 1227VB-72-240-001
H Leg PU17-1227-240-LEG
I Shelf 1227VB-72-240-002
J Mid-Center Leg 1227VB-240-003
Mid-Back Leg 1227VB-240-004K
Touch Up PenII OX-0180Y
HH Leveler T-1007
FF Drawer Glide PUDTC-14x3-Handle
GG Drawer Handle CF-32-003-BN
JJ Allen Wrench PU16-5-AW
K
J
D
G
I
H
JJIIHHGGFF

11
REPLACEMENT PARTS FOR 1227VB-72-242
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
D Sink PU17-18x14-SQUARE
G Drawer Front 1227VB-72-242-001
H Leg PU17-1227-242-LEG
I Shelf 1227VB-72-242-002
J Mid-Center Leg 1227VB-242-003
Mid-Back Leg 1227VB-242-004K
Touch Up PenII OF-0120R
HH Leveler T-1007
FF Drawer Glide PUDTC-14x3-Handle
GG Drawer Handle CF-32-003-BN
JJ Allen Wrench PU16-5-AW
K
J
D
G
I
H
JJIIHHGGFF