Greentouch TB Series User manual

第1页
ShenZhen GreenTouch Technology Co.,Ltd
TB-seriesAssemble User Manual
Contact: Peter.Wan
Tel:[phone]-8018 Skype:wanli889
Mobile: [phone] QQ:2355562940
Fax:[phone]-8008 Wechat:13823548639
Email:[e-mail] Web: www.touchscreenfactory.com
Add:3rd Floor,Building A2,ShenZhen Low-Carbon Science Industrial Park,Sillicon Valley
Power,Guiyue Road,Zhangge Market,Guanlan Town,LongHua New District,ShenZhen
City,518110,China

第2页
Assemble user manual instruction:
Accessory list (as below pic):
1. X axis transmitting tub 1 pcs
2. Y axis transmitting tub 1 pcs
3. Y axis receiving tube 1 pcs
4. X axis receiving tube 1 pcs
Screws: 10 pcs (one screwdriver)
Step : 1
Find the right place A-A , B-B , C-C , D-D .

第3页
Step 2
At the corner of B-B , lift the black buckle up for the connector (Please don’t be too
hard , is damaged easily). Pick up the B side , Insert the FPC cable (blue face is up)
into the FPC connector , and lock the buckle .The FPC cable unfold , easy to break .
When connect well . Be careful to push the PCB into frame .As below pictures show :
Note : The A and D side no need to connect , Because we have connect it well . But i
suggest you to check it whether it loose. (C side don’t have cable )
Step 3
Take the touchscreen on the back to the desktop , and take the cable and wiring into
the slot .Tighten the screws (A-A , B-B ,C-C ,D-D)

第4页
Step 4
The front of touch frame is label A , B , C , D . After assemble it well , put on monitor
and connect the USB to PC . Overlay will turn monitor to touch.
Note : If there is any question , please contact us at above information . It is our great
honour to serve you .