Grizzly T10116 User manual

MODEL T10116
AUXILIARY TABLE FOR
MODEL G0563/G0564
INSTRUCTIONS

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

      
      
    
     


Inventory Figure 1
A.  
B.  
C.  
D.  
E.  
Figure 1



Assembly
1.        


2.       


        

      
Step 3
Figure 2







        
      
   Figure 2   

      


Step 3
Note:The 13⁄4", 21⁄4", and 31⁄4" table inserts
only fit the spindle drum—they will not fit over
the main sanding belt and idler roller.
If you need help with your new auxiliary table, call
our Tech Support at: [phone].

 
T10116 Parts Breakdown and List
-
,
)
'
(
.
&
*
&
&%
&(
&*
&)
&&
+
*
&%
&'
&'
&%
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PFS03 FLANGE SCREW 10-24 X 3/8 9 PT10116009 TABLE TOP
2 PT10116002 TABLE COVER U-TYPE (R) 10 PFH01 FLAT HD SCR 10-24 X 3/8
3 PT10116003 TABLE COVER U-TYPE (L) 11 PSB16 CAP SCREW 3/8-16 X 3/4
4 PT10116004 KEY 5/16 X 5/16 X 12-3/8 12 PT10116012 TABLE INSERT 4-1/4"
5 PSB17M CAP SCREW M4-.7 x 10 13 PT10116013 TABLE INSERT 3-1/4"
6 PT10116006 TABLE SPINDLE U-TYPE 14 PT10116014 TABLE INSERT 2-1/4"
7 PT10116007 DUST COLLECTOR COVER 15 PT10116015 TABLE INSERT 1-3/4"
8 PT10116008 CAST IRON TABLE U-TYPE
3. 

Figure 2
4. 
     
       

A gap is created between the 41⁄4" insert and
the spindle sanding drum. To reduce the risk
of fingers getting pinched in this gap, DO
NOT sand workpieces on the spindle drum
with the 41⁄4" insert! ONLY sand workpieces
on the main belt with the 41⁄4" insert.
5.          
