Grizzly T28932 User manual

For questions or help with this product contact Tech Support at [phone] or [e-mail]
MODEL T28932
36" X 24"
WELDING TABLE
INSTRUCTIONS
COPYRIGHT © MARCH, 2020 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 12/18) #CS20333 PRINTED IN CHINA V1.03.20
Introduction
The T28932 Welding Table has a load capacity of
500 lbs. It provides a stable surface on which to
perform welding operations. Standard 5⁄8" holes
are spaced every 2" for clamp systems or custom
jigs.
Specifications
Weight Capacity ..................................... 500 lbs.
Work Table Size ....................................24" x 36"
Work Table Thickness ........................... 9 Gauge
Work Table Working Height ............................ 34"
Figure 1. T28932 inventory.
Description Qty
A. Work Table w/Frame .................................. 1
B. Support Legs .............................................. 4
C. Short Crossmembers ................................. 2
D. Long Crossmembers .................................. 2
E. Adjustable Feet M8-1.25 x 38 .................... 4
F. Hex Bolts M8-1.25 x 16 .............................. 8
G. Hex Bolts M6-1 x 16 ................................... 8
H. Hex Nuts M8-1.25 ..................................... 12
I. Hex Nuts M6-1 ........................................... 8
J. Lock Washers 6mm.................................... 8
K. Flat Washers 6mm ..................................... 8
Inventory
A
BF
C
G
D
E
H I
J K
Assembly
The T28932 Welding Table requires assembly
before use.
Items Needed Qty
Wrench or Socket 14mm ................................... 2
Wrench or Socket 10mm ................................... 2
To assemble welding table:
1. Use a non-flammable degreaser to remove
cosmoline from work table.
2. Attach four support legs to work table frame
and secure with (8) M8-1.25 x 16 hex bolts
and (8) M8-1.25 hex nuts (see Figure 2).
Figure 2. Support legs attached to work table
frame.
Support
Legs
Work Table Frame
x 8

-2- Model T28932 (Mfd. Since 12/18)
6. Stand table upright, and level table by
adjusting feet. Once level, tighten hex nut on
each foot to secure setting (see Figure 5).
3. Attach two long crossmembers to support
legs with (4) M6-1 x 16 hex bolts, 6mm flat
washers, 6mm lock washers, and M6-1 hex
nuts (see Figure 3).
4. Attach two short crossmembers to support
legs with (4) M6-1 x 16 hex bolts, 6mm flat
washers, 6mm lock washers, and M6-1 hex
nuts (see Figure 3).
5. Lay table on its side and install (1) M8-1.25 X
11⁄2" adjustable foot with (1) M8-1.25 hex nut
on each support leg, as shown in Figure 4.
Figure 3. Long crossmembers and short
crossmembers attached to support legs.
Figure 4. Installing adjustable foot on support
leg.
x 8
Figure 5. Adjustable foot levelling adjustment.
Hex
Nut
Long
Crossmembers
Short
Crossmembers
DO NOT exceed table weight capacity of
500 lbs. Sudden change in dynamic load
at maximum weight capacity could cause
table to tip or collapse, resulting in serious
personal injury or property damage.
Safety & Correct Use
• Do not apply an unbalanced load.
• Keep unsupervised children away from table.
• Do not stand or climb on table.
• Do not use in wet or damp locations.
• Do not leave rags or other items that are
damp with water, oil, paint, or solvents on
table.
• Set up table in well-ventilated area where
there are no hazardous or combustible
materials that could ignite during welding
operations.
• While using an electric welder, welder must
be grounded to either workpiece or table
before welding operation. If grounding to
table, workpiece must contact table so cur-
rent may flow through workpiece to ground-
ing clamp and close welding circuit. Ensure
there is some kind of insulation between
operator and electric current (a dry rubber
mat, rubber gloves, etc.).

Model T28932 (Mfd. Since 12/18) -3-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
T28932 Parts Breakdown & List
1
2
3
4
5
6
7
8
9
10
11
12
13
8
14
15
16
Toreduce risk of serious injury when using this table:
1. Read owner’s manual before using table.
2. Ensure machine is correctly set up before using.
3. Always wear ANSI-approved eye protection.
4. Do not exceed maximum weight capacity of 500 lbs.
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT28932001 TABLE 9 PT28932009 HEX BOLT M6-1 X 16
2 PT28932002 BASE 10 PT28932010 FLAT HD SCR M6-1 X 12
3 PT28932003 SUPPORT LEG 11 PT28932011 HEX NUT M6-1
4 PT28932004 SHORT BEAM 12 PT28932012 ADJUSTABLE FOOT M8-1.25 X 1-1/2"
5 PT28932005 LONG BEAM 13 PT28932013 FLAT WASHER 6MM
6 PT28932006 HEX BOLT M8-1.25 X 16 14 PT28932014 WARNING LABEL
7 PT28932007 LOCK WASHER 6MM 15 PT28932015 QR CODE LABEL
8 PT28932008 HEX NUT M8-1.25 16 PT28932016 TOUCH-UP PAINT, GRIZZLY GREEN
Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here
are available for purchase. Call [phone] or visit our online parts store at www.grizzly.com to check for availability.

WARRANTY & RETURNS
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special,
or consequential damages arising from the use of our products.
The manufacturers reserve the right to change specifications at any time because they constantly strive to
achieve better quality equipment. We make every effort to ensure that our products meet high quality and
durability standards and we hope you never need to use this warranty.
In the event you need to use this warranty, contact us by mail or phone and give us all the details. We will
then issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of
the carton. We will not accept any item back without this number. Proof of purchase must accompany the
merchandise.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
To
take advantage of this warranty, you must register it at https://www.grizzly.com/secureforms/
warranty-card
, or you can scan the QR code below to be automatically directed to our warranty
registration page
. Enter all applicable information for the product.
WARRANTY