Grizzly G0714 User manual

MODEL G0714
35"X 48" INDUSTRIAL
BLAST CABINET
OWNER'S MANUAL
(For models manufactured since 05/22)
COPYRIGHT © NOVEMBER, 2010 BY GRIZZLY INDUSTRIAL, INC., REVISED APRIL, 2022 (CS)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CR13399 PRINTED IN CHINA V4.04.22
***Keep for Future Reference***

This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State
of California to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
Work in a well ventilated area, and work with approved safety equip-
ment, such as those dust masks that are specially designed to filter
out microscopic particles.

Table of Contents
INTRODUCTION............................................................................................................................... 2
Manual Accuracy ........................................................................................................................ 2
Contact Info ................................................................................................................................ 2
Machine Description ................................................................................................................... 2
Identification ............................................................................................................................... 3
Machine Data Sheet ................................................................................................................... 4
SECTION 1: SAFETY....................................................................................................................... 6
Safety Instructions for Machinery ............................................................................................... 6
Additional Safety for Blast Cabinets ........................................................................................... 8
SECTION 2: POWER SUPPLY ........................................................................................................ 9
SECTION 3: SETUP ....................................................................................................................... 11
Needed for Setup ..................................................................................................................... 11
Unpacking ................................................................................................................................ 11
Inventory ................................................................................................................................... 12
Site Considerations .................................................................................................................. 13
Mounting ................................................................................................................................... 14
Air System Setup ..................................................................................................................... 15
Pneumatic Diagram .................................................................................................................. 16
Assembly .................................................................................................................................. 17
Test Run ................................................................................................................................... 21
SECTION 4: OPERATIONS ........................................................................................................... 23
Preparation ............................................................................................................................... 23
Basic Operation ........................................................................................................................ 24
Operation Tips .......................................................................................................................... 25
Blasting Media .......................................................................................................................... 26
SECTION 5: ACCESSORIES......................................................................................................... 29
SECTION 6: MAINTENANCE......................................................................................................... 30
Schedule .................................................................................................................................. 30
Cleaning ................................................................................................................................... 30
SECTION 7: SERVICE ................................................................................................................... 31
Troubleshooting ........................................................................................................................ 31
Filter Replacement ................................................................................................................... 32
Motor Brush Replacement ....................................................................................................... 33
LED Replacement .................................................................................................................... 36
SECTION 8: WIRING...................................................................................................................... 38
Wiring Safety Instructions ........................................................................................................ 38
Wiring Diagram......................................................................................................................... 39
Wiring Components .................................................................................................................. 40
SECTION 9: PARTS....................................................................................................................... 41
Blast Cabinet ............................................................................................................................ 41
Stand & Cabinet Base .............................................................................................................. 43
Labels & Cosmetics ................................................................................................................. 44
WARRANTY & RETURNS ............................................................................................................. 45

-2- Model G0714 (Mfd. Since 05/22)
INTRODUCTION
This blast cabinet is designed for high-use media
blasting operations, where airflow up to 35 CFM
and air pressure up to 125 PSI can be used. Air
pressure is fully adjustable with an air pressure
regulator, and the media output can be adjusted
with the media flow valve. Blasting operations
through a hand-held blast gun are controlled by a
foot valve, and most operations can be carried out
with all types of blasting media.
An internal set of LED lights provide illumination
during blasting operations, and a built-in dust col-
lector maintains blasting environment visibility.
The front of the cabinet is equipped with a large
gas-assisted folding door for easy workpiece
loading and unloading. Media can be quickly
unloaded through the hopper dump port and
reloaded through the loading door.
Machine Description
We stand behind our machines! If you have ques-
tions or need help, contact us with the information
below. Before contacting, make sure you get the
serial number
and manufacture date
from the
machine ID label. This will help us help you faster.
Grizzly Technical Support
1815 W. Battlefield
Springfield, MO 65807
Phone: [phone]
Email: [email protected]
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
Contact Info
We are proud to provide a high-quality owner’s
manual with your new machine!
We
made every effort to be exact with the
instruc-
tions, specifications, drawings, and photographs
in this manual. Sometimes we make mistakes, but
our policy of continuous improvement also means
that
sometimes the machine
you receive is
slightly different than shown in the manual
.
If you find this to be the case, and the difference
between the manual and machine leaves you
confused or unsure about something
,
check our
website for an updated version. W
e post
current
manuals and
manual updates for free
on our web-
site at
www.grizzly.com.
Alternatively, you can call our Technical Support
for help. Before calling, make sure you write
down the
manufacture date and
serial number
from the machine ID label (see below). This
information is required for us to provide proper
tech support, and it helps us determine if updated
documentation is available for your machine.
Manufacture Date
Serial Number
Manual Accuracy

Model G0714 (Mfd. Since 05/22) -3-
Identification
A
E
J
K IL
M
F G H
C
D
N
H. Fresh Air Intake Port
I. Hopper Dump Port
J. Dust Collector Dump Port
K. Loading Door
L. Foot Valve for Blast Gun Control
M. Air Regulator w/Gauge
N. Blasting Gloves
B
A. Viewing Window
B. Gas-Assisted Door Support System
C. DUST COLLECTOR ON/OFF Switch
D. LIGHT ON/OFF Switch
E. Filter Cleaning Plunger
F. Dust Collector
G. LED Light Assembly