Gronomics VG 32-45 User manual

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Using the parts list, locate and count the individual
pieces and verify that you have received the correct
number of pieces.
Check all the pieces for damage. If any pieces
are damaged or missing, contact Gronomics at
1-855-299-6727.
Vertical Garden Bed Pre-Assembled
32” x 45” Assembly Instruction
1
Parts List
ITEM QTY. PART # DESCRIPTION
1 1 VG32-45 Vertical Garden Bed 32”W x 45”H x 9”D
2 1 FL3610 Fabric Liner 36” x 10-1/4”
3 2
4 1 GBDIK
5 1
6 1
7 5
Screw, RSS GRK 10 x 2-3/4”
Garden Bed Irrigation Kit (Contains Items 5 - 7)
Irrigation Tubing 16’
Hose Connector
Eyelet Screws
2
3
5
6
7
4
Parts Identification
1
Item #: VG 32-45
NOTE:Ground preparation is optional,
however we recommend leveling area under
frame of product, or place product directly on
a flat level surface before filling with soil.
Product Care and Maintenance - Western Red Cedar will turn a weathered grey if left unfinished. Although no finish is required
for cedar when used outdoors, a natural oil finish applied regularly will help maintain the beauty and minimize cracking and drying. It is
recommended to use Gronomics Garden Bed Oil (Item # GBO-1Q), a non-toxic, food safe finish that is very easy to apply.Apply Oil when air
and windtemperaturesarebetween50-90degrees. Avoid applying in direct sunlight.
Packaged & Inspected by:________________________________________Date:___________________
RSS10-234ZY
SCEY6Z

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Remove the five angled front shelf boards.
Angled Front Shelf Board Removal
2
RemoveAngled
Shelf Boards
RemoveAngled
Shelf Boards
Position Logo Upside Down
Irrigation KitAssembly
3
NOTE: The irrigation tubing will be routed
through the left side panel hole.
LEFT SIDE PANELROUTING- Locate and
install five eye bolts (Item 7) into the side rails.
Install the eye bolts into the pre-drilled holes in
the side panels marked with a Black “X”. (Left
side panel (Black “X”) routing shown).
7

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
NOTE: Left side panel routing shown.
Locate the irrigation tubing (Item 5). Route the
irrigation tubing (end with plug) through the hole of
the left panel and weave the irrigation tubing through
the eye bolts (bottom to top).
Irrigation KitAssembly Continued
Left Side
Panel
Hole
4
5
Locate the hose connector and screen
(Item 6). Install the screen inside the hose
connector (screen facing out).
NOTE: Install the hose connector in the left
side panel. (Left side panel routing shown).
Install the irrigation tubing (Item 3) onto the
hose connector and install the hose connector
into the side panel.
Irrigation KitAssembly Continued
2
5
5
6
6
Irrigation Tubing
End With Plug

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Position Logo Upside Down
Irrigation KitAssembly Continued
Remove the plug from the end of the irrigation tubing.
Cut the tubing to the desired length. Re-install the
plug into the end of the irrigation tubing.
NOTE: If the irrigation tubing needs to be cut shorter,
always cut the hose in front of or behind the drip
section (enlarged section) of the irrigation tubing.
Plug
Drip Section
6
Install the five angled front shelf boards into the side panel
slots with the beveled edge (front edge) facing you.
Angled Front Shelf Installation
7
InstallAngled
Shelf Boards
InstallAngled
Shelf Boards

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Position Logo Upside Down
Position Logo Upside Down
Fabric Liner
Stabilizing The Garden Bed
Locate the piece of fabric liner (Item 2).
Place the fabric in the bottom of the vertical
garden.
NOTE: Bottom angled front shelf board has
been removed for picture clarity.
NOTE: The angled front shelf board with
logo may need to be removed to access
screws while fastening the vertical garden
to the structure.
NOTE: The garden bed is not intended for
hanging on a wall or struture.
Locate and install the two screws (Item 3)
into the pre-drilled holes of the top back
board. Fasten the vertical garden to a
stable structure.
3
8
9
2
Angled Front Shelf
Boards w/Logo

www.gronomics.com East Bethel, MN USA 763-753-7374
Position Logo Upside Down
Planting Bedding
10
10
NOTE: Before adding the plant bedding, verify that
the vertical garden is securely fastened to a stable
structure. Verify that all back rails and shelf rails are
completely installed.
CAUTION: When filling the vertical garden with plant
bedding, support the irrigation tubing while filling.
This will help prevent damage to the irrigation tubing.
Slowly place the plant bedding into the top of
the vertical garden.Add plant bedding until it is
approximately one inch below the top back and shelf
rails.