Grundig DSR 5450 HD User manual

ǵ
DIGITAL
SATELLITE
RECEIVER
DSR 5450 HD
DEUTSCH
ENGLISH

2
CONTENTS _________________________________________
4-6 General information
4 Packing contents
4 Grundig accessories for satellite receivers
4 Receiving digital stations
5 Special features of your digital receiver
6 What is Common Interface?
7 Set-up and safety
8-9 Overview
8 The front of the digital receiver
9 The back of the digital receiver
10-12 The remote control
10 Television mode
11 PVR mode
12 Photo album
12 MP3 function
13-14 Connection and preparation
13 Connecting two satellite antennas or LNCs
13 Connecting one satellite antenna or LNC
13 Connecting the television
13 Connecting a video recorder
13 Connecting an AV receiver or hi-fi system
14 Connecting a digital multi-channel amplifier
14 Connecting a PC
14 Connecting the mains cable
14 Inserting batteries in the remote control
15-19 Basic settings
15 The menu
16-19 Assigning preset stations
20-24 Settings
20 Parental lock
21-23 Editing the station list
24 Receiving encoded satellite stations
25-27 Basic functions
25 Switching on and off
25 Mode selection
25 Selecting preset channels
25 Adjusting the volume
26 Muting the sound
26 Selecting stations from lists
26 Switching from the current station to the previous one
26 Selecting the audio channel
27 Electronic programme guide (EPG)

ENGLISH
3
CONTENTS _________________________________________________
28-42 Personal Video Recorder
28 The hard disk
29-32 Recording
33-34 Playback
35 Editing the PVR list
36 Decoding programmes
37-39 Photo album
40-42 MP3 function
43-48 Additional functions
43 Custom settings
44 Timer functions
45 Editing stations
46 Editing transponders
47-48 Editing satellites
49-52 Antenna settings
49-50 Setting for a fixed antenna
51 Setting for a motorised antenna
52 Setting for an antenna with USALS system
53-55 Special settings
53 Copying stations
53 Deleting all stations
54 Resetting the receiver to the original state
54 Updating the digital receiver software
55 Displaying device information
55 Connecting the digital receiver to a PC
56-59 Information
56-58 Technical data
59 Troubleshooting

4
Packing contents
1DSR 5450 HD Digital Satellite Receiver
2RC 54 S remote control
3Two batteries for the remote control (2 x 1.5 V, Micro, e.g.
LR 03 or AAA)
4Euro/AV (Scart) cable
5USB cable
6Loop-through cable
7Operating manual
Grundig accessories for satellite receivers
Your specialist dealer will be happy to tell you about the compre-
hensive range of GRUNDIG accessories for satellite receivers.
Receiving digital stations
This DSR 5450 HD digital receiver can play digital satellite stations.
To operate it you need a digital satellite antenna, which must be
installed and directed at the required satellite (for example Astra
and EutelSat/Hotbird).
Unlike analogue broadcasting, digital TV or radio stations are not
all assigned their own frequencies; instead, several TV and/or
radio are ”transmitted” by a single transponder.
To help you with the choice and settings for satellite stations, a selec-
tion of TV and radio stations have already been programmed for
you. So that all the satellite stations that have since gone on air are
available to you, you can start a station search.
Of course, you can easily program new stations yourself. You can
find the current transponder information on teletext from various
broadcasters, or look in a satellite TV guide or on the Internet.
GENERAL INFORMATION__________________

ENGLISH
5
Special features of your digital receiver
The DSR 5450 HD digital receiver can receive and process all unen-
coded and certain encoded digital satellite. It converts the signals
from digital stations to provide outstanding audio and picture quali-
ty.
This digital receiver features a digital video recorder which has two
digital receiver units.
Independently of the station you are currently tuned to, you can
compile, record and play back your personal choice of pro-
grammes.
The digital satellite stations are converted by the receiver unit and
can be stored on the built-in hard disk.
The large storage capacity of the hard disk (80 Gigabytes) allows
you to record up to 40 hours of material in excellent picture and
sound quality.
Function Time Shift is a special technical feature. During playback
from the hard disk you can press a button on the remote control to
simply pause the programme you are watching and resume it again
at a later time.
Using the reverse search function you can quickly find the start of
the current programme, and you can use the fast forward function
to view it in real time again.
During a recording in progress, you can select a different pro-
gramme from the archive and watch that.
The electronic TV guide also tells you of any schedule changes at
short notice, and provides an overview of all the stations’ schedules
for the next few hours.
You can call up detailed information on each TV programme at the
touch of a button.
This digital receiver has a very comprehensive, user-friendly menu
system.
The menu is displayed on the television screen, and the functions of
the remote control buttons are explained.
GENERAL INFORMATION______________________________

6
What is Common Interface?
Common Interface (CI) is an interface for DVB receivers such as
digital receivers (including set-top boxes).
The digital receiver and CI modules can receive and process all
unencrypted and certain encrypted digital stations.
Encoded channels can only be viewed with a CI module suitable for
the encoding system and the appropriate smart card.
The front of the digital receiver has a Common Interface slot. You
can use CI modules from various providers in the Common Interface
slot.
You can insert the provider’s smart card into the CI module in order
to enable the encrypted satellite stations you want to see.
Note:
Disconnect the power plug before you insert a CI module.
GENERAL INFORMATION______________________________

ENGLISH
7
SET-UP AND SAFETY___________________________
°C2h
°C
OK
MENU
OK
MENU
/I
DSR5450HD TWINDIGITAL SATELLITE RECEIVER
-S
OK
MENU
/I
DSR5450 HD TWINDIGITALSATELLITE RECEIVER
-S
OK
MENU
/I
DSR5450 HD TWINDIGITAL SATELLITE RECEIVER
-S
Krieg im Balkan
OK
MENU
/I
DSR5450 HD TWINDIGITAL SATELLITE RECEIVER
-S
AC 90-240V~
50/60Hz
50W
USB TV
VCR
LNB IN
IF OUT
TUNER 2
DC13/18V
400mAMax.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LNB IN
IF OUT
TUNER 1
DC13/18V
400mAMax.
To ensure that this high quality, easy-to-use digital receiver gives
you lasting entertainment and enjoyment, please note the following
information.
This digital receiver is designed to receive, record and play back
video and audio signals. Any other use is expressly prohibited.
When setting up the digital receiver, make sure it is in a horizontal
position and that the mains socket is easily accessible.
Please note when setting up the digital receiver that furniture sur-
faces are coated with various types of paint and plastic, which often
contain chemical additives. These additives may cause corrosion to
the feet of the unit. This may leave stains on the surface of the furni-
ture which can be difficult or impossible to remove.
If the digital receiver is subject to a sudden change in temperature,
for example when brought in from the cold to a warm room,
let it stand for at least two hours before you connect it to the mains
supply.
Do not expose the digital receiver to any moisture.
The digital receiver is designed for use in dry rooms. If you do use it
outdoors, please ensure that it is protected from moisture, such as
rain or splashing water. Do not place any vessels such as vases on
the digital receiver. These may be knocked over and spill fluid on
the electrical components, thus presenting a safety risk.
Do not place the digital receiver close to heating units or in direct
sunlight, as this will impair cooling. Place the digital receiver on a
hard, level surface. Do not lay any objects such as magazines on
the digital receiver. When placed in a cabinet, make sure there is a
minimum space of 10 cm around it.
Thunderstorms are a danger to all electrical devices. Even if the
digital receiver player is switched off, it can be damaged by a
lightning strike to the mains or the antenna.
Always disconnect the mains and antenna plugs during a storm.
Never open the digital receiver casing under any circumstances.
Warranty claims are excluded for damage resulting from improper
handling.

8
The front of the digital receiver
1Common Interface slot for inserting a CI module.
ǼǼ/I Switches the digital receiver on and off to standby mode.
MENU Opens and closes the main menu.
OK Opens the station list.
In the menus: confirm entries.
∧∧,∨∨Switch channels up and down one by one.
In the menus: move the cursor up/down, select and change
individual entries.
<<,>>Change the volume.
In the menus: move the cursor left/right, select and change
individual entries.
OVERVIEW____________________________________________
OK
MENU
/I
1

ENGLISH
9
OVERVIEW_________________________________________________
The back of the digital receiver
USB USB interface for data transfer.
VCR Euro AV socket (input and output) for the video
recorder.
TV Euro AV (output) socket for the television.
LNB IN (TUNER 1) Antenna socket for the satellite antenna.
IF OUT (TUNER 1) Antenna socket (output) for a second satellite
receiver.
L R Left/right stereo output sockets (cinch) for the
AUDIO hi-fi system.
VIDEO Video signal output socket (FBAS) for television
or AV receiver.
S/PDIF Audio output socket for digital audio signal (cinch)
for digital multi-channel amplifier.
SERIAL PORT Serial interface for data transfer.
LNB IN (TUNER 2) Antenna socket for the satellite antenna.
IF OUT (TUNER 2) Antenna socket (output) for a second satellite
receiver.
AC 90-240V~
50/60Hz
50W
USB TV
VCR
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LNB IN
IF OUT
TUNER 1
DC 13/18V
400mA Max.

10
THE REMOTE CONTROL _____________________
Television mode
ǼSwitches the digital receiver to standby, and from
standby to the channel last selected.
ıSwitches the sound to mute and on again.
ǁ?Selects the audio channel and default volume.
wSelects the sleep timer and the switch-off time.
EOpens the »Aspect Ratio« menu.
XSwitches between digital receiver mode and the
audio and video signals from the device connected to
the »VCR« socket.
MENU Opens the main menu.
EXIT Quits the menu.
CH ŃSwitch channels up and down one by one.
CH Ľ
ľVOL Adjust the volume.
ıVOL
OK Opens the station list.
EPG Calls up the TV guide.
Displays programme information.
P- Select the next menu page.
P+
RED Switches between TV and radio mode.
GREEN Opens the list of favourites.
YELLOW Opens the satellite selection.
BLUE Opens the group selection.
Switches between Tuner 1 and Tuner 2.
yOpens the »Subtitles« menu.
ķCalls up teletext.
Enlarges the screen picture (zoom function).
Selects video mode, if provided by the station.
RC 54 S
MENU
EXIT
EPG
CH
CH
VOL VOL
REC PVR P+
P -
OK/
CH UST
Time Shift
FAV
T1/T2
A-B
1*?2ABC 3DEF
4GHI 5JKL 6
MNO
7
PQRS
8TUV 9
WXYZ
0

ENGLISH
11
1 ... 0 Select stations.
Enter letters.
Switches between the two most recently selected
channels.
Personal Video Recorder
PVR Opens the »PVR List«.
Press »Q« and then CH Ńor CH Ľto select PVR,
MP3 or Photo.
PVR mode
REC Starts recording.
P- Pause during recording.
P+ Index functions during recording or playback.
Shows the information bar.
Press twice: displays the help menu.
■Stop – return to television signal.
4Playback
$Pause during playback.
Time Shift during live signal.
WFast forward
QFast rewind
9Time shift 15 seconds forward.
8Time shift 15 seconds back.
$R Slow motion forward.
E$ Slow motion reverse.
Repeat the current video file.
A-B Repeats a section of a recorded programme.
?Shows the index list in playback mode.
M
THE REMOTE CONTROL ________________________________
RC 54 S
MENU
EXIT
EPG
CH
CH
VOL VOL
REC PVR P+
P -
OK/
CH UST
Time Shift
FAV
T1/T2
A-B
1*?2ABC 3DEF
4GHI 5JKL 6
MNO
7
PQRS
8TUV 9
WXYZ
0

12
Photo album
ľVOL, CH ŃMove the picture section.
ıVOL, CH Ľ
OK Displays the photo album list when a picture is
shown.
Shows the selected picture in the photo album.
Shows the information bar.
Press twice: displays the help menu.
■Stop – return to television signal.
4Starts the slide show when a photo is shown.
$Stops the slide show.
QEnlarges the current photo.
WReduces the current photo.
8Selects the previous photo.
9Selects the next photo.
MP3 function
OK Displays the MP3 list when playing a file.
Plays the selected file from the MP3 list.
Displays the help menu.
■Stop – return to television signal.
4Resumes playback of the selected MP3 file after it
has been paused.
$Pause
QReverse search.
WForward search.
$R Time shift 15 seconds forward.
E$ Time shift 15 seconds back.
8Selects the previous MP3 file.
9Selects the next MP3 file.
Repeats the current MP3 file.
A-B Repeats a section of an MP3 file.
THE REMOTE CONTROL ________________________________
RC 54 S
MENU
EXIT
EPG
CH
CH
VOL VOL
REC PVR P+
P -
OK/
CH UST
Time Shift
FAV
T1/T2
A-B
1*?2ABC 3DEF
4GHI 5JKL 6
MNO
7
PQRS
8TUV 9
WXYZ
0

ENGLISH
13
Connecting two satellite antennas or LNCs
1Connect the antenna cable of the first satellite antenna or LNB 1 to the
»LNB IN (TUNER 1)« socket and the antenna cable of the second
satellite antenna or LNB 2 to the »LNB IN (TUNER 2)« socket on the
digital receiver. (Screw connection, F connector).
Note:
During a recording, (e.g. using tuner 1), you can change the station as
you wish (using tuner 2).
Connecting one satellite antenna or LNC
1Connect the antenna cable of the satellite antenna to the »LNB IN
(TUNER 1)« socket and then connect »IF OUT (TUNER 1)« to
»LNB IN (TUNER 2)«. (Screw connection, F connector).
Note:
During a recording (e.g. using tuner 1), you can only view stations
(using tuner 2) which have the same polarisation as the station which
you are currently recording.
Connecting the television
1Plug the Euro-AV (Scart) cable supplied into the »TV« socket on the digital
receiver and the corresponding Euro-AV socket (e.g. EURO-AV, SCART)
on the television.
Connecting a video recorder
1Plug a standard Euro-AV (Scart) cable into the »VCR« socket on the
digital receiver and the Euro-AV socket (e.g. EURO-AV, LINE IN/OUT,
EXT.1) on the video recorder.
Note:
When playing back a video recording, the video and audio signal from
the video recorder is automatically looped through to the television via
the »TV« socket on the digital receiver.
Connecting an AV receiver or hi-fi system
1Plug a standard cinch cable into the »VIDEO« and »L R AUDIO«
sockets (left/right) on the digital receiver and the corresponding input
sockets on the AV receiver or hi-fi system.
CONNECTION AND PREPARATION__
R
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LNB IN
IF OUT
TUNER 1
DC 13/18V
400mA Max.
TV
VCR
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LNB IN
IF OUT
TUNER 1
DC 13/18V
400mA Max.
USB TV
VCR
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LN
B
IF
O
TU
N
DC 1
3
400m
USB TV
VCR
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
L
N
IF
TU
DC 1
400
m
T
V
C
R
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LNB IN
IF OUT
TUNER 1
DC 13/18V
400mA Max.

14
Connecting a digital multi-channel amplifier
1Plug a standard cinch cable into the »S/PDIF« socket on the digital
receiver and the corresponding socket on the digital multi-channel
amplifier.
Connecting a PC
1Connect the USB cable of the PC to the »USB« socket on the digital
receiver. (Data transfer and downloading software).
Connecting a PC
1Connect the serial cable of the PC to the »SERIAL PORT« socket (RS 232)
on the digital receiver. (Downloading software).
Connecting the mains cable
1Plug the mains cable into the wall socket.
Inserting batteries in the remote control
1Open the battery compartment by removing the lid.
2Insert the batteries (Micro type, for example LR 03 or AAA, 2 x 1.5 V).
Observe the polarity (marked on the base of the battery compartment).
3Close the battery compartment.
Note:
If the digital receiver no longer reacts properly to remote control
commands, the batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from leaking
batteries.
Environmental note
Batteries, including those which contain no heavy metals, may not be
disposed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
CONNECTION AND PREPARATION_________________
AC 90-240V~
50/60Hz
50W
0V~
z
USB TV
VCR
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LNB IN
IF OUT
TUNER 1
DC 13/18V
400mA Max.
V
C
R
LNB IN
IF OUT
TUNER 2
DC 13/18V
400mA Max.
L
R
VIDEO
S/PDIFAUDIO
SERIAL PORT
LNB IN
IF OUT
TUNER 1
DC 13/18V
400mA Max.

ENGLISH
15
The menu
This digital receiver has a very comprehensive, user-friendly menu
system. The menu is displayed on the television screen.
The digital receiver responds to many functions which you select on
the remote control with informative menus and icons on the televi-
sion screen.
It enables you to select many different settings and contains infor-
mation on using your digital receiver.
The buttons on the remote control for using the menu are explained
on the screen.
The main menu contains the most important controls for your digital
receiver.
Press »MENU« to open the main menu. Press »CH Ľ« or
»CH Ń« and to navigate in the menu and select the submenu.
When you confirm your selection with »OK« you can navigate in
that submenu. Press »CH Ľ« or »CH Ń« to select the menu item.
Press »OK« to confirm. Normally another menu then appears,
where you can use »CH Ľ« or »CH Ń« to navigate and make the
setting. Make settings using »ľVOL«, »ıVOL«, »CH Ľ« or
»CH Ń«.
You can also use the drop-down menu to make settings. Select the
setting and then press »OK«. Press »CH Ľ« or »CH Ń« to make
the setting and press »OK« to confirm.
Press »MENU« to quit the current menu level.
Press »EXIT« to quit the menu entirely.
BASIC SETTINGS __________________________________

16
Assigning preset stations
The digital receiver is already programmed with the stations from
the Astra 19.2° East and Eutelsat/Hot Bird 13° East satellites.
In the following settings, you select the language for the menu,
sound, subtitles and teletext. Adapt the digital receiver to your tele-
vision and configure the tuners.
The preset stations are added to the lists for Tuner 1 and Tuner 2.
You can then sort the stations in the order you require.
1Switch on the digital receiver by pressing »Ǽ/I« on the
receiver.
– The »Language Settings« menu appears when the device is
first switched on.
Language setting
Note:
The »Language Settings« menu is in the main menu under
»User Setting«.
1Select the menu items with »CH Ľ« or »CH Ń«.
2Press »ľVOL« or »ıVOL« to select the language
or
3Press »OK« to open the drop-down menu and press »CH Ľ«
or »CH Ń« to select the language, then press »OK« to confirm.
– »Menu Language«: The language for the on-screen dis-
play (OSD).
– »Main Audio«: The preferred language for pro-
grammes with multi-channel sound.
– »Second Audio«: The alternative language for pro-
grammes with multi-channel sound,
if the language of the first audio
track is not broadcast.
– »Main Subtitle«: The preferred language for pro-
grammes with subtitles.
– »Second Subtitle«: The alternative language for pro-
grammes with subtitles, if the lan-
guage of the main subtitles is not
broadcast.
– »Teletext«: The language for teletext.
4Press »MENU« to go to the next setting.
BASIC SETTINGS ________________________________________

ENGLISH
17
BASIC SETTINGS ________________________________________
Selecting the television picture format
Note:
The »TV Output« menu is in the main menu under »User
Setting«.
You can also select the »Aspect Ratio« menu by pressing
»E«.
1Press »ľVOL« or »ıVOL« to select the picture format.
– »4:3 Full«: Setting for a television or flat screen in
4:3 format.
Wide-screen pictures fill the screen
without black bars at the top and bot-
tom.
– »16:9 Full«: Setting for a television or flat screen in
16:9 format.
– »4:3 Center«: Setting for a television or flat screen in
4:3 format.
Picture fills the screen with the left and
right edges slightly cropped.
– »4:3 LetterBox«: Setting for a television or flat screen in
4:3 format.
Wide-screen pictures are shown with
black bars at the top and bottom.
Selecting Dolby Digital*
If you select Dolby Digital »On« you can enjoy Dolby Digital sound,
as long as it is supported by the current programme.
If the current programme is broadcast in digital multi-channel
sound, the »=« symbol is displayed in the programme informa-
tion.
Before you can enjoy Dolby Digital sound, you must connect the
»S/PDIF« socket to a multi-channel amplifier.
1Select »Dolby Digital« by pressing »CH Ľ« or »CH Ń«.
2Press »ľVOL« or »ıVOL« to select »On«.
* Under license from Dolby Laboratories Licensing Corporation.
DOLBY and the Double-D symbol ijare registered trademarks of the
Dolby Laboratories Licensing Corporation.

18
Specifying the video signal at the Euro AV (TV)
output
You can choose »CVBS« (normal picture quality), »RGB« (high
picture quality) or »S-VIDEO« (high picture quality). The default
setting is »RGB«.
1Select »Video Output« by pressing »CH Ľ« or »CH Ń«.
2Press »ľVOL« or »ıVOL« to select »CVBS« or »RGB«.
– You cannot select the S-VIDEO signal, because it is always
transmitted by the Euro AV output (TV).
3Press »MENU« to go to the next setting.
Setting the local time
You must set the local time so that the electronic programme guide
always shows you the current programmes at the right time.
Note:
The »Local Time Setup« menu is in the main menu under
»User Setting«.
1Select »Time Zone« with »CH Ľ« or »CH Ń«.
2Press »ľVOL« or »ıVOL« to select your time zone.
3Select »Summer Time« with »CH Ľ« or »CH Ń« and press »ľ
VOL« or »ıVOL« to select »On« or »Off«.
4Press »MENU« to go to the next setting.
Tuner configuration
You must configure Tuner 2 according to your antenna and LNB.
Note:
The »Tuner Configuration« menu is in the main menu under
»Installation«.
1In »Tuner 2 Configure« press »ľVOL« or »ıVOL« to select
the setting:
– »Separate«: if you are using two LNBs.
– »Loopthrough«: if you are only using one LNB.
2Select »Store« with »CH Ľ« or »CH Ń« and press »OK« to
confirm.
3Press »MENU« to go to the next setting.
BASIC SETTINGS ________________________________________

ENGLISH
19
LNB setting
You must configure the LNB settings of the receiver according to
your LNB type.
If your satellite antenna is pointed at the Astra 19.2° East satellite
and equipped with a universal LNB, you do not need to change
anything.
Note:
The »LNB Setup« menu is in the main menu under »Installa-
tion«.
1Press »CH Ľ« or »CH Ń« to select the item and then press
»OK«.
2Select the required settings by pressing »CH Ľ« or »CH Ń«
and press »OK« to confirm.
3Once you have entered all the settings, press »CH Ľ« or
»CH Ń« to select »Store« and then press »OK« to confirm.
Note:
You can save the settings for all satellites by selecting »All SAT«.
You must make the settings for Tuner 1 and Tuner 2.
4Press »MENU« to go to the next setting.
Ending the settings
1Press »EXIT« to finish the setting.
– After the search, the digital receiver switches to preset
station 1.
– You can change the order of the preset stations as required
and delete stations you do not need (see the section on
”editing the station list” on page 21).
BASIC SETTINGS ________________________________________

2020
Parental lock
You can use the parental lock function to prevent other people from
watching TV channels, listening to radio stations, and making
changes to the setup or receiver settings.
1In the main menu, select the »User Setting« submenu by press-
ing »CH Ľ« or »CH Ń« and press »OK«.
2Select »Parental Lock« with »CH Ľ« or »CH Ń« and press
»OK« to confirm.
– The message »Enter PIN-code« appears.
– The default PIN code is »0000«.
3Enter the PIN code »0000« using the number buttons.
– The »Parental lock« menu is enabled.
Lock services
If the »Lock services« is set to »Yes«, you must enter the correct
PIN code in order to be able to watch that channel.
1Select »Lock Services« with »CH Ľ« or »CH Ń« and press
»ľVOL« or »ıVOL« to select »Yes« or »No«.
Installation lock
If the installation lock is set to »Yes«, you must enter the correct
PIN code to open the main menu.
1Select »Lock Main Menu« with »CH Ľ« or »CH Ń« and press
»ľVOL« or »ıVOL« to select »Yes« or »No«.
Receiver lock
If the receiver lock is set to »Yes«, you must enter the correct
PIN code to switch on the device from standby.
1Select »STB Lock« with »CH Ľ« or »CH Ń« and press
»ľVOL« or »ıVOL« to select »Yes« or »No«.
Changing the PIN code
You can change the default PIN code.
1Select »Change PIN code« with »CH Ľ« or »CH Ń« and press
»OK«.
2Use the number buttons to enter the current PIN code, then the
new PIN code, and then the new PIN code again to confirm.
Ending the settings
1Press »EXIT« to finish the setting.
SETTINGS ______________________________________________