GSS PHDQ 6100 CI TPS User manual

English
HDTV Digital QAM
PHDQ 6100 CI TPS
CLASS
KLASSE
GSS
Grundig SAT Systems GmbH
Beuthener Strasse 43
D-90471 Nuremberg
Phone: +49 (0) 911 / 703 8877
Fax: +49 (0) 911 / 703 9210
E-mail: [email protected]
Internet: http://www.gss.de

- 2 - PHDQ 6100 CI TPS
Contents
1 Safety regulations and notes..............................................................................4
2 General information ..........................................................................................5
2.1 Packing contents ................................................................................ 5
2.2 Meaning of the symbols used............................................................... 5
2.3 Technical data.................................................................................... 5
2.4 Description ........................................................................................ 6
2.5 Software query .................................................................................. 8
2.6 How the TPS module works.................................................................. 8
Station filter ....................................................................................... 8
Stuffing ............................................................................................. 8
Changing the Transport stream and ORGNET-ID .................................... 8
Changing the NIT............................................................................... 8
2.7 Explanation of the term "symbol rate"................................................... 9
2.8 Bandwidth-efficient assignment of cable channels with low bandwidths... 10
SelecPlex®...................................................................................... 10
3 Assembly ........................................................................................................11
3.1 Installing the cassette ........................................................................ 11
3.2 EMC regulations .............................................................................. 12
3.3 Cassette overview ............................................................................ 13
3.4 Connecting the cassette..................................................................... 13
3.5 Retrofitting a CA module ................................................................... 14
4 The control panel at a glance ...........................................................................15
4.1 Menu items...................................................................................... 15
4.2 Control panel................................................................................... 15
5 Programming ..................................................................................................16
5.1 Preparation...................................................................................... 16
5.2 Notes on level setting........................................................................ 16
5.3 Programming procedure.................................................................... 17
5.4 Programming the cassette ................................................................. 20
Selecting the cassette........................................................................ 20
Selecting the channel strip................................................................. 21
Channel / frequency setting .............................................................. 22
Output channel ................................................................................ 23
Output frequency ............................................................................. 23
Switching the modulator off or on....................................................... 23
Output levels of the channel strips....................................................... 24
Selecting the Tuner (only channel strip B)............................................. 24
LNB oscillator frequency.................................................................... 25
Input symbol rate.............................................................................. 25
DVB mode....................................................................................... 25
Input frequency ................................................................................ 26

- 3 - PHDQ 6100 CI TPS
Signal to noise ratio.......................................................................... 27
Station filter ..................................................................................... 28
QAM modulation ................................................................................30
Inverting the user signal .................................................................... 30
Stuffing ........................................................................................... 30
Substitute signal in the case of an incorrect input signal ....................... 31
Transport stream ID and the ORGNET-ID ............................................. 32
Network Information Table (NIT)......................................................... 33
Deleting a PID.................................................................................. 34
Renaming a PID ............................................................................... 34
Factory reset.................................................................................... 35
Saving settings................................................................................. 35
Operation with a CA module............................................................. 36
PID monitoring............................................................................ 36
Configuring the CA module.......................................................... 36
Descrambling services ................................................................. 38
6 Final procedures..............................................................................................39
7 Channel and frequency tables..........................................................................40

- 4 - PHDQ 6100 CI TPS
1 safety regulations and notes
• Assembly, installation and servicingshould be carried out byauthorised
electricians.
 • Switchofftheoperatingvoltageofthesystembeforebeginningwithassem-
bly or service work or pull out the mains plug.
 • Donotperforminstallationandserviceworkduringthunderstorms.
 • Installthesystemsoitwillnotbeabletovibrate…
 - inadust-free,dryenvironment
 - insuchamannerthatitisprotectedfrommoisture,fumes,splashingwa-
ter and dampness
- somewhere protected from direct sunlight
- not within the immediate vicinity of heat sources
- in an ambient temperature of 0 °C to +50 °C. In case of the formation of
condensation wait until the system is completely dried.
 • Ensurethatthehead-endstationisadequatelyventilated.Donotcoverthe
ventilation slots.
 • Bewareofshortcircuits
 • Noliabilityisacceptedforanydamagecausedbyfaultyconnectionsor
inappropriate handling.
 • Observetherelevantstandards,regulationsandguidelinesontheinstalla-
tion and operation of antenna systems.
 • ThestandardsIEC/EN/DINEN50083resp.IEC/EN/DINEN60728must
be observed.
 • For further information please read the assembly instructions for the head-
end station used.
• Test the software versions of the head-end station and the cassette and
update them if necessary. The current software versions can be found at
"www.gss.de".
Take action to prevent static discharge when working on the device!
Electronic devices should never be disposed of in the household rubbish. In
accordance with directive 2002/96/EC of the European Parliament and the
European Council from January 27, 2003 which addresses old electronic and
electrical devices, such devices must be disposed of at a designated collection
facility. At the end of its service life, please take your device to one of these
public collection facilities for proper disposal.

- 5 - PHDQ 6100 CI TPS
2 general information
2.1 PaCking Contents
1 Cassette PHDQ 6100 CI TPS
2 HF cables
1 Brief assembly instructions
1 Measuring log
2.2 meaning of the symbols used
Important note
—> General note
 •  Performingworks
2.3 teChniCal data
The devices meet the following EU directives:
 2006/95/EC,2004/108/EC
The product fulfils the guidelines and standards for CE labelling.
Unless otherwise noted all values are specified as "typical".
HF input
Frequency range: ....................................................... 925…2150MHz
Level range: ............................................................ 60dBμV…80dBμV
DVB-S modes: ............................................DVB-S 1/2 ,2/3 ,3/4 ,5/6 ,7/8
DVB-S2 modes: ...................QPSK 1/2 ,3/5 ,2/3 ,3/4 ,4/5 ,5/6 ,8/9 ,9/10
8PSK 3/5 ,2/3 ,3/4 ,5/6 ,8/9 ,9/10
Symbol rate DVB-S:.......................................... QPSK: 2…45MSymb/s
Symbol rate DVB-S2:........................................ QPSK:10…30MSymb/s
 8PSK:10…31MSymb/s
HF output
Channels: ............................................................................ S21…C69
Frequency range: ............................................. 42.0MHz…860.0MHz
Output level: ............................................................................. 97 dBμV
Output impedance:......................................................................... 75 Ω
Connections
SAT inputs:.............................................................................2 F sockets
HF output:............................................................................ 1 IEC socket

- 6 - PHDQ 6100 CI TPS
Connection strip (10-pin): ..................for supply voltages and control circuits
RS 232 socket:..................................... serial interface for software update
Conditional access:...........................several channels can be descrambled.
Several channels can be descrambled
Remote maintenance
Remotely controllable (via PSW 1000*): ..............................................yes
Remote update (via BEflash*):.............................................................yes
(* and a corresponding management unit)
2.4 desCriPtion
 ThetwintransmodulatorcassetteisaQPSK-converter,whichconvertsallsta-
tions modulated according to DVB-S / DVB-S2 standard into two QAM-modulat-
ed cable signals. The cassette has two digital SAT IF inputs and an HF output. It
is equipped with two channel strips (" A " and " B "). The channel strips consist of
thedigitaltuners,thedigitalsignalpreparationunitsandtheoutputconverter.
The channel strips are indicated in the head-end station display with "Bx …A"
and "Bx …B". Using an adequate CA module scrambled channels can be de-
scrambled via channel strip "A". The control of the cassette takes place via the
control unit of the head-end sta tion.
Two LEDs indicate if the respective channel strip is switched on (LED illumi-
nates)oroff,andalsoprovideanindicationofthesignalqualitybasedon
their colour. Additionally the quality of the data stream received is displayed
("CN…").
The integrated TPS module (Transport Stream Processing) processes the data
from the demodulated transport streams. This enables service information (NIT
–NetworkInformationTable)tobechanged,dataratestobeincreased(stuff-
ing) and for individual stations to be deleted from the transport stream (thus
optimising bandwidth for the other stations being transmitted).
The HF output signals are sent through the HF output of the cassette to the out-
put collector. The common output level of the channel strips can be set at the
output collector.
 Whenthehead-endstationisswitchedon,thetwo-lineLCdisplayshowsthe
software version of the control unit.
To operate this cassette the software version of the control unit must be "V 43"
or higher. You can find the current operating software for the control unit and
the cassette , the software "BE-Flash" and the current assembly instructions on
the website "www.gss.de".
The cassette is designed for use in head-end stations of the profi line.

- 7 - PHDQ 6100 CI TPS
2.5 software query
Control unit
 If necessary, you can activate the indication of the software version of the
control unit manually:
 • Pressanytwokeysonthecontrolunitofthehead-endstationsimultaneously
until the display goes dark and thesoftwareversion,e.g." V 43 " appears.
2.6 how the tPs module works
 After decoding QPSK- or 8PSK-modulated signals, the demodulated data
stream can be accessed via the integrated TPS module. This data stream,
alsocalledtransportstream,containsseveralstationsinalltheircomponents
(video,audio,dataandserviceinformation),whichcanbechangedusingthe
TPS module.
station filter
 Individual stations can be deleted. This reduces the data rate and, conse-
quently,theoutputsymbolraterequired.
stuffing
 Thetransportstreamispaddedusingwhatisknownaszerodata.Thisensures
a steady and constant output symbol rate.
Changing the tr ansPort strea m and orgnet-id
The transport stream ID can be changed. If the stations of a transponder are
splitintothetransportstreamsofthechannelstrips"A"and"B",oneofthe
both transport streams a new identification must be allocated to realise the
channel search of the settop boxes connected without mistakes.
If the ORGNET-ID is changed a new NIT must be generated.
Changing the nit
The transport stream contains data in the form of tables which the receiv-
ers evaluate and require for convenient use. The TPS module can adjust the
"Network Information Table" (NIT) to accommodate the new station data. The
"NIT" contains data which is required by the set-top box for the automatic
search feature.

- 8 - PHDQ 6100 CI TPS
2.7 exPlanation of the term "symbol rate"
Modulation schemes such as QPSK and QAM transmit multiple bits simultane-
ously. These are referred to as symbols. In addition to the user data flow which
transmitsvideoandaudioinformation,errorcorrectionbitsaretransferred.
The FEC number states the ratio of user bits to the complete transmitted bits.
The output symbol rate is calculated as follows:
256-QAM: SR (A) = FEC x 1/4x SR (E)
128-QAM: SR (A) = FEC x 2/7x SR (E)
64-QAM: SR (A) = FEC x 1/3x SR (E)
32-QAM: SR (A) = FEC x 2/5x SR (E)
16-QAM: SR (A) = FEC x 1/2x SR (E)
4-QAM: SR (A) = FEC x 1/1x SR (E)
Example:
 Outputsymbolrate64-QAM, FEC= 3/4,
 InputsymbolrateSR(E)=27,500 kSymb/s
SR (A) = 3/4x 1/3x27,500 kSymb/s
SR (A) = 6,875 kSymb/s
Note:
 Ifno"FEC"isstatedinthestationlists,itcanbeassumedtobe"FEC=
3/4
".
Reception from a transponder with a very low symbol rate (SCPC station)
The extremely low data rate means that the output symbol rate is very low. If
therearereceptionproblemswithdifferentdigitalreceivers,setoutputsymbol
rate to a higher value.
Defined symbol rates
 Somecableoperatorsspecifyafixedsymbolrate(e.g.6,900kSymb/s).

- 9 - PHDQ 6100 CI TPS
2.8 bandwidth-effiCient assignment of Cable Channels with low bandwidths
seleCPlex®
Channels with low bandwidths are the result of filtering out stations which are
not required. These "narrow" channels can then be arranged in one channel
tosavespace.Todothis,activatethe"Settingtheoutputfrequency"menu(as-
signment outside the official channel grid).
—> Therequiredbandwidth(inkHz)isroughlyequaltothesymbolrate
(kSymb/s) plus 20%.
ESC 1
Nile TV
Nile News
TVP 1
TVP 2
TVP 3
Viva
Gala
3 MHz
64 QAM
2.5 Ms/s
4 MHz
64 QAM
3.3 Ms/s
S21 S22 S23 S24
TV 5 RTM 1 ESC 1 RAI UNO DW TV RTP SISAL TV TV Bulgaria Mediolanum Nile TV Nile News Super Sport Viva Gala Fantasy Cine 5 TVP 1 TVP 2 TV Polonia TVP 3
Astra 19.2° East Eutelsat 7° EastTürksat 42° EastEutelsat 13° East

- 10 - PHDQ 6100 CI TPS
3 assembly
3.1 installing the Cassette
– Ensure the head-end station is mounted so it will not be able to vibrate.
Avoid,forexample,mountingthehead-endstationontoaliftshaftorany
other wall or floor construction that vibrates in a similar way.
– Before installing or changing a cassette unplug the power cable from the
mains power socket.
 • Removethefasteningscrews1of an unoccupied slot from the bracket of
the head-end station.
 • Insertthecassetteinthisslotandpushitintothehousing.
 • Alignthecassetteandapplyslightpressuretoconnectittotheconnections
of the board and the HF bus bar.
 • Fastenthecassettewiththescrews1
0°
1
1
CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE CASSETTE
MESSAUSGANG
A
ACHTUNG!
Vor dem Cassettenwechsel
unbedingt Netzstecker ziehen!
CAUTION!
Before changing cassettes remove
mains plug!

- 11 - PHDQ 6100 CI TPS
3.2 emC regulations
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using cable terminals.
When mounting the cassette in a head-end station which is installed in a 19"
cabinet, make sure the connections leading in and out for the 19" cabinet are
made using cable terminals.
CLASS
KLASSE
The attenuation of shielding of the connection lines must meet the requirements
for "Class A".
 • Inserttherequirednumberofcableterminalsintheopeningsprovidedin
the head-end station or in the 19 " cabinet.
Tighten the nuts of the cable terminals until the teeth on the lock washers put un-
der have penetrated the exterior coating and a good connection is made between
the housing / 19" cabinet and cable terminals.

- 12 - PHDQ 6100 CI TPS
3.3 Cassette overview
5
4
2
1
3
61Status LED
of the channel strip " B "
2 SAT input (channel strip " B ")
3 Status LED of the channel strip " A "
4 SAT input (channel strip " A ")
5 Slot for a CA module
6 D-SUB socket "RS 232"
The operating software of the cassette can be updated via the
9-Pin D-SUB socket "RS-232" using a PC or notebook and the
software "BE-Flash".
You can find the current operating software on the website
"www.gss.de".
3.4 ConneCting the Cassette
 • Plug the SAT input cables into the SAT input sockets " SAT input A " 4(chan-
nel strip "A") and " SAT input B " 2(channel strip "B").
 • Connect the head-end station to the mains power supply.

- 13 - PHDQ 6100 CI TPS
3.5 retrofitting aCa module
The cassette is equipped with a common interface. It allows you to connect a
CA module for various scrambling systems and service providers. Scrambled
channels can only be descrambled with a CA module suitable for the scram-
bling system and the corresponding smart card. The smart card contains all
theinformationforauthorisation,descramblingandsubscription.
– Check with the distributor or manufacturer of the CA module to be used
to ensure that it is suitable for descrambling several channels.
– The hardware and software of this cassette have been thoroughly prepared
and tested.
– Any changes made by program providers to the structures in the program
data might impair or even prevent this function.
 – WhenworkingwiththeCAmodule,pleasereadthecorrespondingoperat-
ing manual from the respective provider.
 • InsertthesmartcardintotheCAmodulesothatthechip3on the smart
card 1faces the thicker side (top) of the CA module 2.
 • InserttheCAmoduleintotheslot4with the top side of the CA module
facing the RS-232 socket of the cassette.
 • PushtheCAmodulewithoutcantingintotheguiderailsoftheCAslot4
and contact it to the common interface.
34 12

- 14 - PHDQ 6100 CI TPS
4 the Control Panel at aglanCe
4.1 menu items
Program the cassette using the buttons on the control unit of the head-end sta-
tion. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the key to select the following main menu items:
– Channel strip
– Selecting channel / frequency setting
– Output channel / output frequency
– Output level
– Tuner (only channel strip B)
– LNB oscillator frequency
– Input symbol rate
– Input frequency
– Station filter
– QAM modulation
– Stuffing
– Substitute signal
– Transport stream and ORGNET-ID
– Network Information Table (NIT)
– Deleting a PID
– Renaming a PID
– Factory reset
4.2 Control Panel
The key pad on the head-end station is used to scroll through the menus and
menu items one at a time:
scrolls forward through the menus.
select parameters in the menus.
setvalues,initiateactions.
selects sub-menus.
scrolls backward through the menus.
saves all entries
BE-Remote V43
PROFESSIONAL

- 15 - PHDQ 6100 CI TPS
5 Programming
5.1 PreParation
 • ConnectthetestreceivertotheHFoutputorthetestoutputofthehead-end
station.
 • Settheoutputchannel/outputfrequencyofthe cassette (see page 22 / 22)
and adjust the TV test receiver to this channel.
 • Switch on the channel strip (modulator) if necessary (see page 22). For each
channelstrip,thereisastatusLED (1/ 3) which indicates if the channel
strip is switched on.
1 3
 • Balancetheoutputlevelsofthechannelstrips"A" and "B" if the difference
in level is ≥ 1 dB (page 23).
5.2 notes on level set ting
In order to prevent interference within the head-end station and the cable sys-
tem,theoutputlevelofthecassettemustbeloweredby10dBcomparedto
analoguecassettesat64QAM,andby4dBcomparedtoanaloguecassettes
at 256 QAM.
 • Measuretheoutputlevelsoftheothercassettesandtunethemtoauniform
output level using the appropriate level controls or software dependent on
the head-end station used. Please regard the assembly instructions of the
respective head-end station.

- 16 - PHDQ 6100 CI TPS
Bx 4B
Tuner B
INPUT
Tuner A / Tuner B
nur Kanalzug B
only channel strip B
Tuner B
Tuner A
Kanalzug “A” mit CA-Modul
Channel strip “A“ with CA module
Bx 4A
Menu <=
CA
=> Edit
*) Die angezeigte Information ist
abhängig vom verwendeten
CA-Modul.
The information displayed is
dependent on the CA module
used.
Bx 4A 01/03
Information *)
MENU
Bx 4A TV X
. . . .
01/06 X – entschlüsseln
descrambling
0 – nicht entschlüsseln
no descrambling
X / 0
nächster Service
next service
Bx 4A
PID Check
CA
on
▶
◀
on / off
▶
◀/
Ein / On
BE–Remote
please wait …
V 43
Box 4
V 19 B
DVBS2-TPS
– – –
Bx 4A/B
V 19 B
DVBS2-TPS
S21
Bx 4A/B
Freq.
OUTPUT
A / B
t > 10 s
Channel / Freq.
Bx 4A/B
850.00 MHz
OUTPUT
on
Bx 4A/B
27500
SYMBOL
DVB-S
Bx 4A/B
11835 -1.8
FREQ
CN 12
▶
◀/
▶
◀/
▶
◀/
on / off
▶
◀/
Bx 4A/B
-3 dB
LEVEL
Bx 4A/B
10600 MHz
LNB
0 … -10 dB
Bx 4A/B
12.0 dB
C/N
(+ 9.6) OK
Anzeige: Signalqualität
Display: Signal quality
▶
◀/
DVB-S / DVB-S 2
Bx 4A/B
Filter
PROGRAM
off
A
B
Bx 4A/B
SR=6900 (6325)
STUFFING
Bx 4A/B
Single Carrier
FAILURE
Bx 4A/B
256-QAM
QAM
normal
▶
◀/
4 … 256 normal / inverse
Null Packets … Single Carrier
▶
◀/
Bx 4A/B
off
NIT
=> Make ▶
on / off Make
Bx 4A/B
PID 0x0000
DROP
off
▶
◀/
Bx 4A/B
0x0000 –> 0000
REMAP
off
▶
◀/
on / off
▶
◀/
on / off
▶
◀/
+
M
B
A
▶
Bx 4A/B
Defaults
FACTORY
=>
Bx 4A/B
STORE
FACTORY
=> M
auf Werkseinstellung
zurücksetzen und speichern
reset to factory defaults
and store
Box 1
..............
..............
..............
Bx 1A
C5-12,S3-24
TWIN-SAT
C07
Böx 4
C5-12,S3-24
TWIN-SAT
C07
Box 5
..............
..............
..............
▶
◀/Bx 4A/B
0x0001,0100
TS/ONID
off
▶
◀/
off / on
01/06Bx 4A/B TV +
Das Erste
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
▶
◀/
on -> off
M
▶
Bedienhinweise
"blättert" Menüs vorwärts.
"blättert" Menüs rückwärts.
wählen die Eingabeposition
wählt Untermenü
stellen Werte ein,.
speichert alle Eingaben.
1zeigt die Eingabeposition
Operating Hints
scrolls forward through the menu.
scrolls backward through the menu.
select the enter position.
selects a submenu.
set values and triggers actions.
saves all entries.
1shows the enter position
5.3 Programming ProCedure
Page 18

- 17 - PHDQ 6100 CI TPS
Bx 4B
Tuner B
INPUT
Tuner A / Tuner B
nur Kanalzug B
only channel strip B
Tuner B
Tuner A
Kanalzug “A” mit CA-Modul
Channel strip “A“ with CA module
Bx 4A
Menu <=
CA
=> Edit
*) Die angezeigte Information ist
abhängig vom verwendeten
CA-Modul.
The information displayed is
dependent on the CA module
used.
Bx 4A 01/03
Information *)
MENU
Bx 4A TV X
. . . .
01/06 X – entschlüsseln
descrambling
0 – nicht entschlüsseln
no descrambling
X / 0
nächster Service
next service
Bx 4A
PID Check
CA
on
▶
◀
on / off
▶
◀/
Ein / On
BE–Remote
please wait …
V 43
Box 4
V 19 B
DVBS2-TPS
– – –
Bx 4A/B
V 19 B
DVBS2-TPS
S21
Bx 4A/B
Freq.
OUTPUT
A / B
t > 10 s
Channel / Freq.
Bx 4A/B
850.00 MHz
OUTPUT
on
Bx 4A/B
27500
SYMBOL
DVB-S
Bx 4A/B
11835 -1.8
FREQ
CN 12
▶
◀/
▶
◀/
▶
◀/
on / off
▶
◀/
Bx 4A/B
-3 dB
LEVEL
Bx 4A/B
10600 MHz
LNB
0 … -10 dB
Bx 4A/B
12.0 dB
C/N
(+ 9.6) OK
Anzeige: Signalqualität
Display: Signal quality
▶
◀/
DVB-S / DVB-S 2
Bx 4A/B
Filter
PROGRAM
off
A
B
Bx 4A/B
SR=6900 (6325)
STUFFING
Bx 4A/B
Single Carrier
FAILURE
Bx 4A/B
256-QAM
QAM
normal
▶
◀/
4 … 256 normal / inverse
Null Packets … Single Carrier
▶
◀/
Bx 4A/B
off
NIT
=> Make ▶
on / off Make
Bx 4A/B
PID 0x0000
DROP
off
▶
◀/
Bx 4A/B
0x0000 –> 0000
REMAP
off
▶
◀/
on / off
▶
◀/
on / off
▶
◀/
+
M
B
A
▶
Bx 4A/B
Defaults
FACTORY
=>
Bx 4A/B
STORE
FACTORY
=> M
auf Werkseinstellung
zurücksetzen und speichern
reset to factory defaults
and store
Box 1
..............
..............
..............
Bx 1A
C5-12,S3-24
TWIN-SAT
C07
Böx 4
C5-12,S3-24
TWIN-SAT
C07
Box 5
..............
..............
..............
▶
◀/Bx 4A/B
0x0001,0100
TS/ONID
off
▶
◀/
off / on
01/06Bx 4A/B TV +
Das Erste
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
▶
◀/
on -> off
M
▶
Bedienhinweise
"blättert" Menüs vorwärts.
"blättert" Menüs rückwärts.
wählen die Eingabeposition
wählt Untermenü
stellen Werte ein,.
speichert alle Eingaben.
1zeigt die Eingabeposition
Operating Hints
scrolls forward through the menu.
scrolls backward through the menu.
select the enter position.
selects a submenu.
set values and triggers actions.
saves all entries.
1shows the enter position

- 18 - PHDQ 6100 CI TPS
Bx 4B
Tuner B
INPUT
Tuner A / Tuner B
nur Kanalzug B
only channel strip B
Tuner B
Tuner A
Kanalzug “A” mit CA-Modul
Channel strip “A“ with CA module
Bx 4A
Menu <=
CA
=> Edit
*) Die angezeigte Information ist
abhängig vom verwendeten
CA-Modul.
The information displayed is
dependent on the CA module
used.
Bx 4A 01/03
Information *)
MENU
Bx 4A TV X
. . . .
01/06 X – entschlüsseln
descrambling
0 – nicht entschlüsseln
no descrambling
X / 0
nächster Service
next service
Bx 4A
PID Check
CA
on
▶
◀
on / off
▶
◀/
Ein / On
BE–Remote
please wait …
V 43
Box 4
V 19 B
DVBS2-TPS
– – –
Bx 4A/B
V 19 B
DVBS2-TPS
S21
Bx 4A/B
Freq.
OUTPUT
A / B
t > 10 s
Channel / Freq.
Bx 4A/B
850.00 MHz
OUTPUT
on
Bx 4A/B
27500
SYMBOL
DVB-S
Bx 4A/B
11835 -1.8
FREQ
CN 12
▶
◀/
▶
◀/
▶
◀/
on / off
▶
◀/
Bx 4A/B
-3 dB
LEVEL
Bx 4A/B
10600 MHz
LNB
0 … -10 dB
Bx 4A/B
12.0 dB
C/N
(+ 9.6) OK
Anzeige: Signalqualität
Display: Signal quality
▶
◀/
DVB-S / DVB-S 2
Bx 4A/B
Filter
PROGRAM
off
A
B
Bx 4A/B
SR=6900 (6325)
STUFFING
Bx 4A/B
Single Carrier
FAILURE
Bx 4A/B
256-QAM
QAM
normal
▶
◀/
4 … 256 normal / inverse
Null Packets … Single Carrier
▶
◀/
Bx 4A/B
off
NIT
=> Make ▶
on / off Make
Bx 4A/B
PID 0x0000
DROP
off
▶
◀/
Bx 4A/B
0x0000 –> 0000
REMAP
off
▶
◀/
on / off
▶
◀/
on / off
▶
◀/
+
M
B
A
▶
Bx 4A/B
Defaults
FACTORY
=>
Bx 4A/B
STORE
FACTORY
=> M
auf Werkseinstellung
zurücksetzen und speichern
reset to factory defaults
and store
Box 1
..............
..............
..............
Bx 1A
C5-12,S3-24
TWIN-SAT
C07
Böx 4
C5-12,S3-24
TWIN-SAT
C07
Box 5
..............
..............
..............
▶
◀/Bx 4A/B
0x0001,0100
TS/ONID
off
▶
◀/
off / on
01/06Bx 4A/B TV +
Das Erste
Programme entfernen / hinzufügen
Removing / activating stations
nächster Service (Programm)
next service (station)
▶
◀/
on -> off
M
▶
Bedienhinweise
"blättert" Menüs vorwärts.
"blättert" Menüs rückwärts.
wählen die Eingabeposition
wählt Untermenü
stellen Werte ein,.
speichert alle Eingaben.
1zeigt die Eingabeposition
Operating Hints
scrolls forward through the menu.
scrolls backward through the menu.
select the enter position.
selects a submenu.
set values and triggers actions.
saves all entries.
1shows the enter position
Page 16

- 19 - PHDQ 6100 CI TPS
5.4 Programming the Cassette
—> Pressing the button for longer than 2 seconds cancels the
programming procedure. This takes you back to the program item
"Selecting the cassette" from any menu. Any entries that have not
been saved are reset to the previous settings.
—> Entries in the menus can be saved by pressing the key. You are
taken back to the "Selecting the cassette" menu item.
—> Pressing the button returns to the previous menus.
 • Switchonthehead-endstation
BE–Remote
please wait …
V 43
t > 10 s
Ein / On
—> The display shows the software version (e.g. V 43)
—> The processor reads the cassettes ‘ data (approx. 10 seconds).
seleCting the Cassette
Box 4
V 19
DVBS2-TPS
– – –
Box 1
………
………
………
Bx 1A
C5-12,S3-24
TWIN-SAT
C07
Böx 4
C5-12,S3-24
TWIN-SAT
C07
Box 5
………
………
………
+
 • Selectthe cassette you want to program (e.g. Box 4) by repeatedly pressing
the button if necessary.

- 20 - PHDQ 6100 CI TPS
seleCting the Channel striP
Selecting channel strip "A"
 • Pressthe button to select channel strip "A".
Box 4
V 19
DVBS2-TPS
– – –
Bx 4A
V 19
DVBS2-TPS
850
—> Button selects the previous cassette.
Selecting channel strip "B"
Box 4
V 19
DVBS2-TPS
– – –
Bx 4A
V 19
DVBS2-TPS
850
Bx 4B
V 19
DVBS2-TPS
858
Box 5
..............
..............
..............
Box 3
..............
..............
..............
 • Pressthe button to select channel strip "B".
—> The display shows e.g. the menu " Bx 4 B DVBS2-TPS ":
"Bx" stands for cassette (box),
"4" for slot 4
"B" for channel strip "B"
"DVBS2-TPS" Type of cassette
"858" Frequency set
—> Button selects channel strip "A".
—> Button selects the following cassette.
 • Pressthe button.
—> The "Channel / frequency setting" – "OUTPUT" menu is activated.