GVision I32ZI-OD-45P0 User manual

I32ZI-OD-
45P0
USER’S MANUAL
4K UHD LARGE FORMAT TOUCH MONITOR
GVISION USA, INC
30398 Esperanza, Rancho Santa Margarita CA 92688 / 949.586.3338 / [e-mail]
WWW.GVISION-USA.COM

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
2
Important Information
Care and Cleaning
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS
UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE
FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY
DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with
this equipment, please contact GVISION. For all other cases, please use the power cord with the plug style that matches the power
socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power outlet and has been
approved by, and complies with, the safety standards in the country of purchase.
*When operating this monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of
the AC power outlet being used.
•Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any liquid, aerosol or glass cleaners.
•Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor
should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided.
•Never push objects or spill liquid of any kind into this product.

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
3
Safety Precautions / Maintenance
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the monitor combination to avoid injury from tip-
over.
Unplug the monitor during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the monitor has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
Do not press strongly upon the panel with a hand or a
sharp object such as a nail, pencil, or pen, or make a
scratch on it.
Do not stick metal objects or any other conductive
material into the power cord. Do not touch the end of
the power cord while it is plugged in.
Keep the packing anti-moisture material or vinyl
packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed, induce
vomiting and go to the nearest hospital. Additionally,
vinyl packing can cause suffocation. Keep it out of the
reach of children.
Concerning the Power Cord (Can differ by country):
Check the specification page of this owner’s manual to
be certain concerning current requirements. Do not
connect too many devices to the same AC power outlet
as this could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in
electric shock or fire. Periodically examine the cord of
your device, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the device,
and have the cord replaced with an exact replacement
part by an authorized servicer. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the device. Do not move
the monitor with the power cord plugged in. Do not use
a damaged or loose power cord. Be sure do grasp the
plug when unplugging the power cord. Do not pull on
the power cord to unplug the monitor.
To reduce the risk of fire or electrical shock, do not
expose this product to rain, moisture or other liquids. Do
not touch the screen with wet hands. Do not install this
product near flammable objects such as gasoline or
candles, or expose the TV to direct air conditioning.
Do not use high voltage electrical equipment near the
TV (e.g., a bug zapper). This may result in product
malfunction.
Do not expose to dripping or splashing and do not place
objects filled with liquids, such as vases, cups, etc. on
or over the apparatus (e.g., on shelves above the unit).
Do not attempt to modify this product in any way without
written authorization from GVISION. Unauthorized
modification could void the user’s authority to operate
this product.
Moving: Make sure the product is turned off, unplugged,
and all cables have been removed. Do not press or put
stress on the front panel of the monitor screen.
If you smell smoke or other odors coming from the
monitor screen, unplug the power cord and contact an
authorized service center.
If water or another substance enters the product (like an
AC adapter, power cord, or display unit), disconnect the
power cord and contact the service center immediately.
Otherwise, this may result in fire or electric shock.

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
4
Table of Contents
1. Controllers & Settings……………………………………………………………………………………………………5
1.1 Monitor Interface………………………………………………………………………………………………….5
1.2 Monitor Controller Button……………………………………………………………………………………….6
1.3 Select Input Source……………………………………………………………………………………………....6
1.4 OSD Menu……………………………………………………………………………………………………….....7
1.4.1 Brightness...…………………………………………………………………………………...…………7
1.4.2 Image………………………………………………………………………………………………………7
1.4.3 Color Temp…………………………………………...…………………………………………………..8
1.4.4 OSD Setting………………………………………………………………………………………………8
1.4.5 Reset……………………………………………………………………………………………………….9
1.4.6 Misc………………………………………………………………………………………………………...9
2. Trouble Shooting……………………………………………………………………………………………………….10
3. Specifications…………………………………………………………………………………..…………...…............11
4. Dimension………………………………………………………………………………………………………………..12

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
5
INTERFACES INSTRUCTION
1 USB IN Touch source of USB Type-B
2 DVI DVI Input Source
3 HDMI HDMI Input Source
4 DP DisplayPort (DP) Input Source
5 DC IN Main power input of monitor, DC12V
32″ 4K UHD large format touchscreen monitor performs 10-point PCAP touch technology, and designed to support
digital HDMI, DisplayPort, and DVI Input ports.
1Controllers & Settings
1.1 Monitor Interface

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
6
1 MENU Enter the menu, save the adjustment of sub menu and exit the OSD
2 LEFT Change the value on selected menu
3 RIGHT Change the value on selected menu
4 SOURCE Select an input source
5 POWER Monitor Power On / Off
1.2 Monitor Controller Button
1.3 Select Input Source
Press “SOURCE” button on monitor to change the
input source of the monitor.
1. Press “SOURCE” button to change input source and
then press ►or ◄button to select input source on
monitor.
2. Press “E” enter button select input source from the
monitor.

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
7
Main Menu Main Menu Icon Submenu Sub-submenu Description
BRIGHTNESS
BRIGHTNESS None Adjusts display brightness
CONTRAST None Adjusts display contrast ratio
ECO
STANDARD Normal use mode
TEXT Text application mode
GAME Game application mode
MOVIE Movie playing application mode
DCR
ON Enables DCR
OFF Disables DCR
Main Menu Main Menu Icon Submenu Sub-submenu Description
IMAGE
H.POSITION None Adjusts the picture horizontal position
V.POSITION None Adjusts the picture vertical position
CLOCK None Adjusts the picture clock to reduce the
vertical noise
PHASE None Adjusts the picture phase to reduce the
horizontal noise
ASPECT
AUTO Auto checks and adjusts the image
display aspect ratio
WIDE Adjusts the image aspect ratio as wide-
screen mode
4:3 Adjusts the image aspect ratio as 4:3
mode
1.4 OSD Menu
1.4.1 Brightness
Select Brightness from the menu.
1.4.2 Image
Select Image from the menu.

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
8
Main Menu Main Menu Icon Submenu Sub-submenu Description
COLOR TEMP.
COLOR TEMP.
WARM Set as warm color temperature
COOL Set as cold color temperature
USER Set as user color temperature
RED None Finely tunes red color temperature
GREEN None Finely tunes green color temperature
BLUE None Finely tunes blue color temperature
Main Menu Main Menu Icon Submenu Sub-submenu Description
OSD SETTING
LANGUAGE None
Selects the language displayed by OSD
menu (English, French, German,
Simplified Chinese, Italian, Spanish,
Portuguese, Turkish, Polish, Dutch,
Russian, Korean)
OSD H.POS. None Adjusts OSD horizontal position
OSD V.POS. None Adjusts OSD vertical position
OSD TIMER None Adjusts OSD display time
TRANSPARENCY None Adjusts OSD transparency
1.4.3 Color Temp.
Select Color Temperature from the menu.
1.4.4 OSD Setting
Select OSD Setting from the menu.

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
9
Main Menu Main Menu Icon Submenu Sub-submenu Description
RESET
IMAGE AUTO
ADJUST None Auto adjusts the horizontal/vertical
position, focus and clock of the image
RESET None Restore to factory setting
AUTO
POWERDOWN
[Disabled]
None Select energy-saving, automatic shutdown
in 1min. without any signal input.
Main Menu Main Menu Icon Submenu Sub-submenu Description
MISC
HOTKEY TYPE ECODCR
Any selected item is Hotkey. The first two
are available for all models; ASP+ECO is
only available for wide-screen model;
SOU +VOL is respectively used to switch
input signal and adjust the volume
SIGNAL SOURCE
DP DP (digital) signal input
DVI DVI (digital) signal input
HDMI HDMI (digital) signal input
1.4.5 Reset
Select Reset from the menu.
1.4.6 Misc.
Select Misc. from the menu.

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
10
TROUBLE SUGGESTIONS
The picture does not
appear
Check to see that all the I/O and power cables is firmly seated in the socket.
Check the power LED is lighting when the monitor was turned on.
Check if the brightness control is at the appropriate position, not at the
minimum.
The screen is not
synchronized
Check if the I/O signal cable is firmly seated in the socket.
Check if the output level matches the input level.
Make sure the signal timings of the computer system are within the
specification of the monitor.
The position of the
screen is not in the
center
Adjust the H-position, and V-position, or perform the auto adjustment or
memory recall.
The screen is too bright
(too dark) Check if the brightness or contrast control is at the appropriate position.
The screen is shaking or
waving
Press the auto adjustment control to adjust. Moving all objects which emit a
magnetic field such as motor or transformer, away from the monitor. Check
if the specific voltage is applied.
Check if the signal timing of the computer system is within the specification
of monitor.
If experiencing trouble with the monitor, or it fails to operate correctly, please refer to the following
instructions before calling for repairs.
2Trouble Shooting
If you are unable to correct the fault by using this chart, stop using your monitor and contact us via
email [e-mail] or call 949-586-3338 from RMA department.

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
11
MODEL I32ZI-OD-45P0
Resolution 3840 x 2160
Response Time 9.5ms
Brightness (MAX) 350cd/m²
Response Time (Typical) 14ms
Aspect Ratio 16:9
Viewing Angle 178°(H)/178°(V)
Display Color 1.07B
Contrast Ratio 3000:1
INTERFACE
HDMI 1
DVI 1
DisplayPort 1
TOUCH TECHNOLOGY
Type Projected Capacitive PCAP
Point 10-Point
CABINET
Color/Material Black/Metal
POWER
Electrical Rating 12V DC / 3A (AC 100V ~ 240V, 50/60Hz)
TEMPERATURE
Operating 32~104°F
DIMENSION
Inch 29.5 x 17.8 x 2.2
WEIGHT
Weight 30.8 Lbs
VESA™
Mount Size 200x200mm
Specifications subject to change without any notice
3Specifications

WWW.GVISION-USA.COM
30398 Esperanza Rancho Santa Margarita CA 92688 / Tel. [phone] / Fax. [phone] / Email. [e-mail]
12
4Dimensions
I32ZI-OD-45P0