hager coviva Smartbox TKP100A Quick guide

Page 1/34 05-2019
Operation and conguration instructions
hager.com
coviva Smartbox
coviva Smartbox
TKP100A
WLAN stick
TKH180
Power supply
(replacement requirement)
TKC110

Page 2/34 05-2019
Contents
Design and layout of the device.................................................................................................3
Scope of delivery ......................................................................................................................................................3
Optional accessories ................................................................................................................................................3
Function .......................................................................................................................................4
System information...................................................................................................................................................4
Correct use ...............................................................................................................................................................5
Product characteristics .............................................................................................................................................5
1 Preparations.............................................................................................................................6
Role concept.............................................................................................................................................................6
Congure myHager account.....................................................................................................................................6
Install coviva mobile-App..........................................................................................................................................7
Call up coviva web app.............................................................................................................................................7
2 Project implementation...........................................................................................................8
Log in to the app as administrator (Figure 6)............................................................................................................8
Add user (Figure 7)...................................................................................................................................................9
Edit/remove user (Figure 8)....................................................................................................................................10
3 Conguration adaption.........................................................................................................11
Update device software (Figure 9)..........................................................................................................................11
Add device to the project ........................................................................................................................................11
Add Connected device (Figure 10)....................................................................................................................12
Combine devices into groups (Figure 11)...............................................................................................................12
Edit/remove group (Figure 12)................................................................................................................................13
Create covigram .....................................................................................................................................................15
Example 1: Temperature warning (Figure 13):...................................................................................................16
Example 2: Outdoor lighting (Figure 15): ...........................................................................................................18
Example 3: All OFF (Figure 16):.........................................................................................................................19
Edit/remove covigram (Figure 17)..........................................................................................................................21
Add device to the favourites list (Figure 18)...........................................................................................................23
Remove device from the favourites list (Figure 19)................................................................................................23
Change settings (Figure 20)...................................................................................................................................25
4 Operation.................................................................................................................................27
Operating concept ..................................................................................................................................................27
Carry out a networkreset ........................................................................................................................................30
RGB LED display....................................................................................................................................................31
Remote maintenance ................................................................................................................31
Activate/deactivate remote access .........................................................................................................................32
Appendix ....................................................................................................................................33
User proles and rights ............................................................................................................33
Further connected devices.......................................................................................................34
hager.com
coviva Smartbox

Page 3/34 05-2019
Design and layout of the device
(1)
(10)
(9)
(8)
(7)
(6)
(5)
(12) (13) (14)
(15)
(16)
(11)
(4)
(2)
(3)
ONLINE
WLAN
POWER
005587...
GC03/16
Figure 1: Rear/side view and accessories
(1) RGB LED display
(2) USB connection sockets
(3) RJ45 connection socket (LAN)
(4) Connection power supply
(5) QR code with coviva ID
(6) Operation LED POWER
(7) WLAN Display - only active with optional WLAN stick (see Accessories)
(8) Status display ONLINE
(9) Acknowledge button OK
(10) Button RESET
Scope of delivery
–coviva Smartbox
–Protective cover (11)
–Adapter plate for wall mounting (12)
–Power supply 230 V~/5 V (13)
–RJ45 connection cable, Cat 5e (14)
Optional accessories
–WLAN stick (15)
–WLAN adapter (16)
hager.com
coviva Smartbox

Page 4/34 05-2019
Function
System information
The coviva Smartbox forms the interface of wirelessly communicating devices such as KNX
radio actuators or Twin Band devices and WLAN as well as IoT applications to the existing IP
infrastructure via a network router. Electrical loads and functions of the building control can be
interlinked, visualised, monitored and operated on mobile end devices or stationary computers
by means of a mobile app or browser-based web app. In this way, location-independent access
to the building control - via the home network and via the Internet - can be ensured and at any
time.
This solution is especially designed for implementing smart Home functions and comfort in mo-
dernised or retrotted systems.
Local access
Building control
Internet
mobile-App Web-App
Global access
1)
WLAN/IoT Mobile communications Radio (KNX radio, Twin-
Band)
1) Not available in every country.
Figure 2: Application environment
hager.com
coviva Smartbox

Page 5/34 05-2019
Lighting
Web-App
mobile-App
Light- and
sun protection
Temperature
control
Security
devices Extension
Figure 3: System overview
Correct use
–Interface for wireless communication with receivers/actuators via the IP network
–Operation and visualisation on (mobile) end devices via coviva app
–Connection to the network router by cable or via optional WLAN stick (see Accessories)
–The device is only suitable for indoor areas.
Product characteristics
–secure system administration via user proles with different rights
–control of KNX radio systems and WLAN applications via mobile app for mobile end devices
or web app for notebook, PC, …
–simple creation of scenes (covigrams) via the app
–self-congurable messages after events
–remote access and remote maintenance via integrated Dyn DNS service
–Logic operations
–Updates with notications available online
hager.com
coviva Smartbox

Page 6/34 05-2019
The administration process
Prepare the smartbox in three steps for operation of building control:
myHager
coviva
Preparation Project implementati-
on Operation
Conguration adapti-
on
1 Preparations
Role concept
User proles with different access rights must be managed in the coviva app.
User prole Access rights myHager ac-
count
Example
Electrician during the project
- unlimited rights
after the handover, if required:
- Remote access after release
by the administrator
Required Installation engi-
neer, planner
Administrator for one user per smartbox:
- Conguration rights for
adding/removing devices
- Administration of all users
Required Builder
User name normal rights for adapting and
operating the system
not required Family members,
fellow occupants
Table 1: User proles
Detailed information on the access rights per user prole can be found in an overview table
in the appendix.
Congure myHager account
In order to manage a project with the smartbox, successful registration as an administrator ac-
cording to the role concept (Table 1) under hager.com is necessary.
Go to the hager.com website and click on register now.
Or:
Scan the QR code with an appropriate app, switch to the coviva
hager.com/coviva
homepage and select Registration.
Fill out the personal data, agree to the use of personal data and congure
account with Send.
An e-mail with a conrmation link for activating the my Hager account will
be sent to you ().
Click the Complete registration button in the
e-mail to activate the account.
Later, you can also view completed coviva projects via the account (Figure 5).
hager.com
coviva Smartbox

Page 7/34 05-2019
Send
I agree that the personal data given here may be
combined, processed and used with other personal data
that you have about me so that you are able to present
products and solutions to me that tailored specifically to
my requirements and interests. Please read on here
Yes, please send me newsletters to inform me of new
products, services and software updates from Hager
Vertriebsgesellschaft.
* Mandatory fields
Newsletter
Consent *
[phone]
United-Kingdom
Telford, Shropshire
TF1 7FT
Hortonwood 50
Hager Ltd.
97.11.1969
Business address *
DD.MM.YYYY
Business address Private address
Company *
Street / house number*
Postal Code*
Place*
Country*
Phone
Mobile phone no.
Hager Ltd.
Welcome to coviva!
Your electrician has set up your coviva Box
for you.
To benefit from the full range of functions
supported by your connected home, you
will need a myHager account.
You can create a myHager account easily
for my[email protected] right now:
Complete registration
Input (265)
Figure 4: Congure myHager account
Install coviva mobile-App
Log in to the corresponding app store on the end device and select the coviva app.
Download and install app.
The app requires at least version IOS 7.1 or Android 4.1 or higher on the mobile
end device.
Call up coviva web app
As an alternative to the mobile app, it is also possible to access the smartbox after project take
over via a web portal from a PC, notebook or mobile end device with a Windows operating
system. An HTML5 compatible browser such as Chrome, Safari, Internet Explorer or Firefox is
required. The user interface is similar to the coviva mobile app and provides the same functions
in a suitable format for larger screens.
Enter the URL customised with the ID: https://12-stellige coviva ID.koalabox.net/webapp in
the browser.
The web app opens.
The web app can also be called up via the myHager account.
Log into the my Hager account and select.
Open the web app via .
The end device and smartbox must be online each time the web app is subsequently used.
Installation engineer'sCustomer's e-mail address
coviva: Intelligent retrofit wireless technology
0024C6F21834 my[email protected]
Your coviva installations
My account
My software
My coviva
Installations
With the wireless coviva system for smart
homes, you are oering your customers a
solution for an intelligent home. Ideal for retrofit,
renovation or modernisation projects.
Learn more now!
ID
[email protected]
Figure 5: myHager project view
hager.com
coviva Smartbox

Page 8/34 05-2019
2 Project implementation
Log in to the app as administrator (Figure 6)
Following project handover, the administrator automatically receives an e-mail in the coviva app
from his or her electrician indicating that Connected Home can now be used and containing the
access data (e-mail address). The administrator can now log in to the coviva app.
The (mobile) end device is online.
Open the coviva app .
The coviva ID for connecting to the smartbox is displayed. If this is not the case, use and
the (mobile) end device's camera to scan in the coviva ID shown on the rear side under the
cover or enter it via the keypad.
Select Login to change over to the login page.
The administrator must have a myHager account. If an account has not yet been created,
following handover, the user will be forwarded to the registration page the rst time he or she
attempts to log (see setting up myCongure myHager account account).
Enter User name and the Password for myHager account and log in with Add user.
If the General Term of Use (GToU) for the coviva app have not yet been accepted in the my-
Hager account, the corresponding web page must be accessed at this point.
To do this, press the myHager GTC buton.
Accept the GToU via the checkbox and complete the operation via Save.
Afterwards, log in again to the app.
i
my devices
my groups
my covigrams
Off
Off
Off
Wall light living ro...
Living
Scene TV
Ceiling light living
Standard lamp_85...
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
space return.?123
[email protected]
Login
Login
Back
Welcome to coviva !
The unique ID on the rear of your
coviva controller connects you directly
to your coviva
0024C6F21834
Test without login
Login
Welcome to coviva!
Your electrician has set up your coviva Box
for you.
You can now enjoy your connected home.
Download the coviva app:
Download the app to your device here.
Your myHager access data:
[email protected]
Kind regards,
Your Hager Vertriebsgesellschaft team
Input (265)
MyHager GToU
To use coviva application, General
Terms of Use shall be validated for
you MyHager account. Please
click“MyHager GToU” button to be
redirected for the validation.
General Term of Use
Terms of use
Please confirm the terms and conditions of use
for your coviva Smartbox.
Personal data
coviva terms and conditions of use *
I accept the coviva terms and
conditions of use of dated 31/01/2017.
*Mandatory fields
Hager Ldt.
Save
Hager Ltd.
Publication details Data privacy Cookie policy
Terms of use
Please confirm the terms and conditions of use
for your coviva Smartbox.
Thank you
We have saved your consent in your myHager
account.
Please now re-open the coviva app on your
smartphone or tablet, navigate back to the login
form and enter your myHager password again.
You should be able to activate the app
immediately.
Hager Ltd.
Publication details Data privacy Cookie policy
Hager Ltd.
Figure 6: E-mail and administrator login
hager.com
coviva Smartbox

Page 9/34 05-2019
Add user (Figure 7)
The administrator can set up a user prole with corresponding access rights (see Table 6) for all
tenants and visitors for operating the building control via the coviva app.
As local operation also functions ofine, we recommend that as the administrator you create
an additional user prole for yourself with standard access rights (user). As a user, you can
log into the app and remain logged in without having to validate the access data online.
In the main menu press and call up the settings with .
Select All users .
The Users view is called up.
Add a user with the button in the top right corner.
Assign the level of rights to the user with Classic (User) via the checkbox. Conrm with
Save or discard via .
Then select in succession:
–First name and last name
–E-mail address and telephone number
–User name and passwort
Each entry must be conrmed with Save or discarded via Back .
The new prole is displayed in the overview of all users.
i
coviva
Devices
Groups
Covigrams
Favorites
Logout
Peter
Principle
Me
Others
Users
Settings
Meier
Installer
coviva ID
0024C6F21834
Date/Time
09.11.16, 00:00
coviva Language
English
coviva Vers.
2.6.7(cc24680)
KNX Version
1.1.13
Alarm Version
1.0.6
Users
My account
Principle
All users
Settings
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
space return.?123
Name coviva
Add user
return.?123
Forename
Surname
Please indicate the name of the
new User
Name
Save
Back
Musterman
Max
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
space return.?123
Name and Password
Please enter the name and
password of the Wifi network you
want to create.
Add user
Save
Back
Name
Password
Repeat pas.
[email protected]
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
space return.?123
Add user
Save
Back
Contact information
Please indicate the contact
information of the new user
E-Mail
04452/918951Phone
[email protected]
Add user
Save
Classic
Please choose which type of user you
want to add
User right
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
space return.?123
Peter Principle
Installer
Classic
User
Me
Others
Settings
Meier
Max
Figure 7: Create user
hager.com
coviva Smartbox

Page 10/34 05-2019
Edit/remove user (Figure 8)
The user data from the electrician and administrator are always updated with those stored in
the myHager account. These proles cannot be removed or their user data changed via the
app.
The Settings page has been called up.
Select all users.
The user view is called up.
The saved data is displayed via next to a user.
Then carry out the following actions as required:
–Modify entires in the user data and conrm via Safe or discard via < ….
–A new password can be assigned with Change password , which must be conrmed with
Save or discarded via < ….
–All rights in the app are withdrawn from this user via the Delete User button.
Alternatively a user reset can be performed on the smartbox in order to restore the project to
its status prior to handover.
Max
Save
User
Surname
E-mail
Phone
User name
Rights
Change password
Classic
Contact
Profile
[email protected]
[email protected]
Mustermann
04452/918951
Delete User
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
space return.?123
Password
Repeat pas.
Change password
Save
Peter
Save
User
Surname
E-mail
Phone
User name
Rights
Change password
Classic
Contact
Profile
04452/918951
Delete User
Max
[email protected]
[email protected]
Mustermann
Peter
Principle
Installer
Classic
Meier
User
Me
Others
Settings
Max
space return.?123
My account
Principle
Installer
Meier
User
Me
Others
Settings
coviva ID 0024C6F21834
Date/Time 09.11.16, 00:00
coviva Language English
coviva Vers. 2.6.7(cc24680)
KNX Version 1.1.13
Alarm Version 1.0.6
Users
My account User
All users
Settings
Figure 8: Edit/remove user
hager.com
coviva Smartbox

Page 11/34 05-2019
3 Conguration adaption
The following descriptions are based on the mobile app in the IOS system. The Android app as
well as the descriptions in the Web app may vary slightly from this, but the functions, buttons
and messages are identical.
Update device software (Figure 9)
If a software update is available for the smartbox, this is displayed via a message.
We recommend carrying out the update immediately in order to prevent any malfunctions or
incompatibilities.
Start the update with Install .
The RGB display (1) of the smartbox ashes during the update. It goes out after successful
completion of the update.
The operation may take a few minutes. If the connection is disconnected during the update,
restore the connection with Retry.
If the update is to be carried out at a later time,
rst decline the update via Later .
Each time the app is subsequently opened, the update will be offered again.
i
my devices
A new update for your
coviva controller is
available. During the
update process the coviva
controller will be not
reachable for some
minutes.
Update available
Install
Later
Figure 9: Software Update for the Smartbox
Add device to the project
Each device must be integrated individually.
Press the blue button.
The context menu for selecting the device category for the product to be integrated opens.
The list of compatible products is available under hager.com/coviva.
As an example, the integration of the weather station (internal module) from Netatmo is descri-
bed following. All compatible devices from other manufacturers can also be added to the coviva
Smartbox as appropriate.
hager.com
coviva Smartbox

Page 12/34 05-2019
Add Connected device (Figure 10)
The weather station (indoor module) has been commissioned and has been registered in the
WLAN network. A Netatmo account has been created.
Select Netatmo in the context menu.
The view for entering the access data of the Netatmo account opens.
Enter E-mail address and password for the Netatmo account of the customer and nish via
Let‘s go .
The connection setup of the app via the smartbox to the Netatmo account is displayed in the
app. If the connection is successful, Netatmo is displayed.
Activate the line with the description and change the name for the weather station if requi-
red.
Finish the operation with Save or switch to the main menu via Back.
The added device is displayed under my devices .
Carry out the operation with each additional, compatible device until all Netatmo devices
have been added and uniquely named. As a result, the devices stored in the Netatmo ac-
count are displayed for selection, instead of another prompt for the access data.
Groups
Temperature
Humidity
CO2
Sound meter
Pressure
none
23,3°C
35%
881 ppm
57dB
1028 mBar
Details
Save
Weather station
Back
Measurements
11 23456789
- / : ; ( )
. , ? ! ´
€ & @ “
0
#+=
Let's go
Add a device
space.?123
Adding Netatmo weather station
Enter the user name and password
of your Netatmo account.
[email protected]
return
my devices
Wall light living room
Ceiling light living
Standard lamp sofa
Off
Off
Off
What kind of device
would you like to add?
Netatmo
Smart Thermostat
Cancel
i
my devices
my groups
Wall light living room
Lighting first floor
First floor
Ceiling light living
Standard lamp sofa
Weather station
Off
Off
20°C
Off
i
Figure 10: Add Netatmo devices
Combine devices into groups (Figure 11)
Devices can be combined into groups for easy navigation. In this way, all devices can be grou-
ped, for example, room by room or per oor.
To do this, press the green button.
A context menu for selecting whether a group or zone should be added if thermostats are
installed, is displayed.
Select Add group.
A list with all devices is displayed under a new Group. The title line under is activated.
Give the group a name via the keypad.
The desired devices are added by activating the relevant checkbox of this group.
Assign the devices to this group with Save or discard via .
The group is displayed in the main menu.
Devices can be added to a group at any time.
To do this, press on the group.
The combined devices in the group are displayed.
Press the blue button.
All devices not yet added to this group are displayed.
hager.com
coviva Smartbox

Page 13/34 05-2019
Select the devices to be added via the checkbox.
Assign the devices to the group with Save or discard via .
The added devices are displayed in the device list of the group.
Go back to the main menu via Back.
i
my devices
my groups
my covigrams
Off
Off
Off
Living
Scene TV
Wall light living room
Ceiling light living
Standard lamp sofa...
i
Off
my devices
Off
Off
my groups
my covigrams
Wall light living room
Living
Scene TV
Eat-in kitchen
Ceiling light living
Standard lamp sofa...
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
.?123
Eat-in kitchen
Group
Save
space return
Ceiling light living
Wall light living room
Standard lamp sofa
i
Off
my devices
Off
Back
Wall light living room
Standard lamp sofa...
Eat-in kitchen
i
my devices
Off
Off
Off
Back
Ceiling light kitchen
Ceiling light living
Workplace light kit...
Blind kitchen
Blind living room
Eat-in kitchen
Devices
Save
Ceiling light living
Ceiling light kitchen
Workplace light kitchen
Mirror hall
Ceiling light hall
Wall light bathroom
Blind kitchen
Blind living room
i
Off
my devices
Off
Off
my groups
Wall light living room
Eat-in kitchen
Ceiling light living
Standard lamp sofa...
Living
Scene TV
Figure 11: Create group, add group
The combining of devices for heating control such as thermostats in a zone takes place in
the same way as with a group and is initiated by selecting Add hot water zone. A zone is
also displayed in the main menu under my groups.
Edit/remove group (Figure 12)
The groups can be edited in the app or removed again at any time.
Press iin the top right corner of the main menu.
All elements in the main menu are switched to edit mode.
Select the group to be edited via the ion the corresponding group.
Details about the group, such as the switching state and integrated devices, are displayed.
Then carry out the following actions as required:
–Change the name of the group by activating the name line and making an entry via the
keypad.
–Devices to this group or remove it from this via the displayed checkboxes.
–Group from the project Delete.
The group is no longer displayed in the main menu.
hager.com
coviva Smartbox

Page 14/34 05-2019
With the exception of Delete, nally conrm all edit operations with Save or discard via Back .
The display returns to the main menu and displays the changes.
Press in the top right corner of the main menu to exit the edit mode.
my devices
my groups
my covigrams
Off
Off
Off
Wall light living room
Scene TV
Eat-in kitchen
Ceiling light living
Standard lamp_851...
Detail
Save
Gerät entfernen
Living
Back
Device Ceiling light living
Delete
i
i
i
i
i
i
my devices
my groups
Off
Off
Off
my covigrams
Wall light living r...
Living
Scene TV
Eat-in kitchen
Ceiling light living
Standard lamp s...
Devices
Detail
Ceiling light living
Wall light living room
Standart lamp_851...
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
Detail
Save
Delete
space
Device
Ceiling light living
Back
Living room
.?123 return
i
my devices
my groups
my covigrams
Off
Off
Off
Wall light living room
Eat-in kitchen
Living
Scene TV
Ceiling light living
Standard lamp_851...
my devices
my groups
my covigrams
Off
Off
Off
Wall light living r...
Scene TV
Eat-in kitchen
Ceiling light living
Standard lamp...
i
my devices
my groups
my covigrams
Off
Off
Off
Wall light living room
Scene TV
Living room
Eat-in kitchen
Ceiling light living
Standard lamp_851...
Figure 12: Edit/remove group
hager.com
coviva Smartbox

Page 15/34 05-2019
Create covigram
Covigrams are ideal for frequent or conditional actions that should be controlled and/or automa-
tically triggered. A covigram denes a scene, in which one/several trigger/s start/s one or more
actions.
Triggers and actions are dened via If … … Then …-logic functions. In the course of this, seve-
ral triggers are OR/AND-linked, while the actions are AND-linked.
Basically the following types of triggers can be dened:
– Time:
This allows a daily routine to be congured at a specic time or one/several weekday(s) to
be selected, when one/several action(s) is/are to be triggered at a specic time.
– Event:
This allows a device with a respective switching/operating state to be selected, which then
forms the trigger for one/several action(s).
A group cannot be dened as a triggering event.
–Celestial:
Astro function that can be used to dene sunrise or sunset actions. These variable times are
set by IP localisation via the router's location and can be shifted by +/- 03:59 h.
By default, the sun's position will trigger the dened action(s) daily. If the sun's position is
to trigger actions only on certain days of the week, an additional and-linked time trigger
must be added.
–Play:
When selecting the manual trigger, one/several action(s) can be started exclusively by an
operation in the app. The manual trigger cannot be and-linked with other triggers.
Denable types of actions for the trigger are:
– Device:
One or several devices can be selected from all added devices and their switching/operating
state, which should be reached after the trigger, can be dened.
–Push notication:
An individually created text message can be written for one/several triggers, which appears
as a push message for all users in the app when triggered. Timely information can be helpful
in order to initiate a countermeasure if required.
Once the project has been handed over, the electrician does not receive a push mes-
sage any more.
In the event that the app is not opened, the push message is additionally output on the
end device, if enabled.
–Partial:
If a zone is selected as an action, a heating zone can be controlled after triggering, for ex-
ample, a new temperature setpoint is received or another operating state is switched to.
In this way, many combinations are possible.
As an example, three tasks will be implemented one after another in one covigram each:
hager.com
coviva Smartbox

Page 16/34 05-2019
Example 1: Temperature warning (Figure 13):
Task: If the room temperature drops below 18 °C in the bedroom or children's room, a message
should be sent in order to check this actively and to initiate countermeasures if required.
To do this, press the red button.
The editing page Covigramm opens. The title line under is activated.
Give the covigram a name via the keypad and terminate the entry with the Return button.
Dene trigger
Press the button under If ….
The page for dening a trigger opens.
Select the type of trigger, in the example Event (Figure 14).
The button of the trigger type is highlighted in red. All devices of the project are listed with
symbolic buttons and their name.
The display can be swiped to the left and right.
Select the device by pressing the symbolic button, in the example Heating bedroom.
Possible triggers are displayed.
Select the trigger by pressing the symbolic button, in the example Temperature Moves
under.
The button of the trigger is highlighted in red.
Set the desired minimum temperature using the scroll wheel, in the example 18 °C.
Finish the setting of the trigger with Save or discard via .
The trigger is displayed under Covigramm.
Add another trigger in the same way if required, which is OR-linked, via the button, in the
example OR-linked in the top row Heating children‘s room.
hager.com
coviva Smartbox

Page 17/34 05-2019
Trigger
Save
Choose a trigger
Light Ceiling lig. Heati. s. Heati. k. Netatmo
Choose a device
Time
Event
Sun pos.
Play
my devices
my groups
my covigrams
Off
Off
Off
Wall light living r...
Living
Scene TV
Ceiling light living
Standard lamp s...
Trigger
Save
Time Event Sun pos. Play
Choose a trigger
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
Covigrams
Save
Temperature warning
or
And only ...
If...
space returnreturn
.?123
Time
Event
Sun pos.
Play
< 18,0°C
18,0
17,5
18,5
19,0
19,5
17,0
16,5
Trigger
Save
Light
Ceiling lig.
Heati. s.
Heati. k.
Netatmo
Adjust value
Set to moves under moves
Temperature
Temperature
Temperature Heizm
Set trigger
Covigrams
Save
Temperature warning
Heati. k.
Heati. s.
or
If...
and
And only ...
and
Then...
Covigrams
Save
Temperature warning
Heati. k.
and
or
And only ...
and
Then ...
If...
...
Figure 13: Covigram for example 1: Trigger
Dene action
Press the button under Then … .
The page for dening an action opens.
Select the type of action, in the example Push notication (Figure 14).
The button of the action type is highlighted in red. Only a possible action is displayed in the
example.
Select the action by pressing the symbolic button, in the example Notication sent to every
user.
The button of the action is highlighted in red. The keypad and an input eld for the message
opens.
Enter a message via the keypad.
Save the action and message with Save or discard via .
The triggers and action are displayed under Covigramm.
Save the covigram again via Save or discard via .
The view switches to the main menu. The created covigram is displayed under my covi-
grams.
hager.com
coviva Smartbox

Page 18/34 05-2019
Save
Device Push n. Zone
Action
Choose an action
Push notificat.
Notification sent to
every user
Covigrams
Save
Temperature warning
Heati. k.
Push n.
and
Heati. s.
or
then ...
If...
and
And only ...
Q W E R T Y U I O
A S D F G H
Z X C V B N M
J K L
P
Save
Action
Push notificat.
Notification sent to
every user
space return
.?123
Edit notification
The temperature has fallen below the
minimum temperature. Please change
operation mode or increase the setpoint.
i
my devices
my groups
my covigrams
Off
Off
Wall light living room
Living
Scene TV
Temperature warning
Standard lamp sofa...
Figure 14: Covigram for example 1: Action
Example 2: Outdoor lighting (Figure 15):
Task: On Saturday and Sunday the outdoor lighting should be switched on earliest at 19:00 and
on the other weekdays earliest at 17:00 every evening. In the course of this the outside lighting
should only be switched on after sunset. This ensures, for example, that the outdoor area is
illuminated at xed times of arrival, such as after work in the winter months, and that switching
does not occur during the summer months, when no lighting is required at the time of arrival.
To do this, press the red button.
The editing page Covigramm opens. The title line under is activated.
Give the covigram a name via the keypad and terminate the entry with the Return button.
Dene trigger
In the le view of the covigram via under If … select the type of trigger, in the example
Zeit .
The buttons for triggering Every day or Every weekday are offered at a specic time.
Press the Every weekday button.
Select the days Sa and Su.
Set the time for the action in the format hour:min using the scroll wheels - here 19:00 - and
nish with Save.
Add the second trigger for the remaining weekdays in the same way via under If … - for
Mo - Fr at 17:00 and nish with Save.
In addition, for all weekdays, select the second condition for triggering via under And only
…; in the example, sun position with the sun position symbol.
The buttons during the day and during the night are available with constantly adjusting sunri-
se and sunset times.
Press the button during the night and conrm with Save.
In the detailed view of the covigram under And only … is displayed
Dene actions
Select the types of actions via under Then …, in the example Device .
All devices are displayed.
Select a device - here light Entry.
Upon the occurrence of one of the triggers, select the switching state of the device (switched
on/switched off) via the buttons provided - in the example Lighting entry Switched on - and
nish with Save.
hager.com
coviva Smartbox

Page 19/34 05-2019
Add the remaining lights in the outdoor area via in the same way as the action being exe-
cuted simultaneously - light Pavement, light Housewall, ..., select the switching state Swit-
ched on and nish with Save.
Complete the covigram with Save.
The covigram is displayed in the main menu.
If the outdoor lighting should be switched off again at a specic time in the morning, a sepa-
rate covigram must be created for this.
19.00
19 00
18
59
20
01
21
17
58
02
Save
Trigger
Choose a device
Choose a trigger
Time
Event
Sun pos.
Play
at a certain time
Every day
at a certain time
at a certain time
Mo. Tu. We. Th. Fr. Sa. Su.
Every weekday
17.00
17 00
16
59
18
01
19
15
58
02
Save
Trigger
Choose a device
Choose a trigger
Time
Event
at a certain time
Every day
at a certain time
Every weekday
Adjust trigger time
at a certain time
Mo. Tu. We. Th. Fr. Sa. Su.
Sun pos.
Play
Detail
Save
Outdoor light
eve. Sa. Su.
and
or
Then...
If...
Back
und
And only...
Save
Trigger
Choose a Condition
Choose a trigger
Time
Event
Sun pos.
05:52 - 21:03
during the day
21:03 - 05:50
during the night
Save
Trigger
Choose a device
Choose a trigger
Time
Event
Play
Set trigger
Switch on
Input
Switch o
Input
Input
Sidewalk
Housewa.
Bedroom
Kitche
Detail
Save
Outdoor light
eve. Sa...
19:00
eve. Mo...
17:03
or
If...
Back
and
Then...
Sun pos.
during the
and
And only...
Detail
Save
Outdoor light
eve. Sa...
eve. Mo...
or
If...
Back
and
Then...
und
And only...
... ...
Detail
Save
Back
Outdoor light
Eve. Sa. Su.
Eve. Mo...
or
Input
Sidewalk
Housewa.
and
Then...
If...
Sun pos.
and
And only...
my covigrams
my groups
my favorites
Off
Off
Temperature warning
Ceiling light living
Eat-in kitchen
Off
Scene Tv
Outdoor light
Figure 15: Covigram for example 2
Example 3: All OFF (Figure 16):
The entire lighting in the house should be switched off and all blinds closed by manually pres-
sing a button, for example, when leaving the house or when going to bed.
To do this, press the red button.
The editing page Covigramm opens. The title line under is activated.
Give the covigram a name via the keypad and terminate the entry with the Return button.
Dene trigger
In the le view of the covigram via under If … select the type of trigger, in the example
Play .
The button for Trigger covigram with Play button appears.
Activate button and nish with Save.
In the detailed view of the covigram under If … is displayed.
hager.com
coviva Smartbox

Page 20/34 05-2019
Dene actions
Aelect the types of action via under Then …, in the example Device .
All devices are displayed.
Select a device - here Ceiling light living.
By manually triggering, select the switching state of the device (switched on/switched off)
via the buttons provided - in the example Ceiling light living Switched off - and nish with
Save.
In the detailed view of the covigram under Then … is displayed.
Add the remaining lights in the house via under If … in the same way - Wall light living,
Standard lamp, ... -, select the switching state Switched off or when dimming, set the value
0% einstellenusing the scroll wheel and nish with Save.
Now set all blinds in the house to closed.
Select a device - here Blind kitchen.
The button for ... Set to certain value appears.
Activate button, using the scroll wheel set the value to 100% (closed) and nish with Save.
In the detailed view of the covigram under Then … is added.
Dene all other blinds in the house in the same way as action.
Complete the covigram with Save.
The covigram is displayed in the main menu.
Trigger
Save
Choose a trigger
Event
Set trigger
Trigger covigram with
Play button
Play
Tim
Sun pos.
Play
Save
Trigger
Choose a device
Choose a trigger
Time
Event
Play
Set trigger
Ceiling lig.
Wall lig.
Stand. la.
Bedroom
Kitche
Switched on
Ceiling light
living
Switched o
Ceiling light
living
Covigram
Save
All OFF
Play
and
or
If...
And only ...
and
Then...
Covigram
Save
All OFF
Play
or
and
And only ...
If...
Wall lig.
and
Stand. la. Bedroom
Then...
Covigram
Save
All OFF
Play.
or
and
And only ...
If...
Then ...
Childr. ro.
Bedroom.
Study
and
100,0
99,0
98,0
97,0
100,0%
Save
Trigger
Set trigger
moves
Adjust value
Device
Push no.
Zone
Choose a device
Blind living room
Set to certain value
Kitchen
Kitchen
Living ro.
Bedroom
Childr. ro.
Study
Covigram
Save
All OFF
Play
or
and
And only ...
If...
Ceiling lig.
and
Then...
Wohnküche
Szene TV
my groups
my covigrams
Temperature warning
Outdoor light
All OFF
Eat-in kitchen
Scene TV
...
... ...
Figure 16: Covigram for example 3
hager.com
coviva Smartbox