Hama HOME S7 User manual

CZ
F
D
GB
I
NL
H
RUS
SK
S
FIN
Operating Instructions
Bedienungsanleitung
Mode d‘emploi
Руководство по эксплуатации
Istruzioni per l‘uso
Gebruiksaanwijzing
Használati útmutató
Návod k použití
Návod na použitie
Bruksanvisning
Käyttöohje
HOME S7Shredder
Aktenvernichter
00
050172

2
1
5
3
4
Home S7

4Home S7
g
Parts
Instruction manual
1. Waste bin
2. Operating switch
3. Warning symbols
4. Feed shaft
5. Connection line

5
Home S7
g
1. Introduction
1.1 Foreword
By purchasing this shredder you have decided in favour of a quality
product of Hama, which corresponds to the latest state of development
with respect to technology and functional performance.
Please read the information contained in this booklet to familiarise
yourself quickly with the unit and to be able to make full use of its
functions.
This device is new and has never been used. Any cutting remnants
may come from test runs performed for quality assurance during pro-
duction.
Note in accordance with DIN 66399:
Every person – whether a legal entity or a private individual – is res-
ponsible for destroying all condential personal or sensitive informati-
on in order to protect privacy. Whether it is your own private informati-
on or that of another party, it is in your own interest to prevent personal
information, particularly your own, from falling into the wrong hands.
Hama shredders offer help you can count on.
1.2 General information on this device
The Home S7 shredder shreds paper, staples, magnetic strip and chip
cards.
You may not shred: CDs, DVDs and Blu-ray Discs, continuous statio-
nery, adhesive labels, lm, newsprint, cardboard, paper clips, lamina-
tes or plastic (with the exception of the aforementioned items).
1.3 Information on this instruction manual
This instruction manual is part of the shredder Home S7 (hereinafter
referred to as unit) giving you important information on the intended
use, safety, connection as well as operation of the unit.
The instruction manual has to be kept near the unit at all times. It has
to be read and applied by all persons who use this unit or remove any
faults of the unit.
Keep this instruction manual in a safe place and pass it on with the unit
to any future owners.

6
HomeS7
g
1.4 Copyright
This piece of documentation is protected by copyright.
Any duplication or reprinting, in whole or in part, and the reproduction
of the illustrations even in modied form is only permitted with the writ-
ten approval of the manufacturer.
1.5 Liability disclaimer
All technical information, data and instructions for the operation con-
tained in this operating manual are in conformity with the last status
prior to printing and shall be rendered on the basis of our previous
experience and knowledge to the best of our belief.
The manufacturer assumes no liability for damage or injury resulting
from failure to observe the instruction manual, use for other than the
intended purpose, unprofessional repairs, unauthorised modications
or use of non-approved spare parts.
2. Safety
2.1 Fundamental safety precautions
Observe the following safety instructions to ensure safe handling of
the unit:
■Inspect the unit for visible signs of damage before use. Do not use
a damaged unit.
■Persons who due to their physical, mental or motor response abi-
lities are unable to operate the unit may only use the unit under
supervision or instruction by a responsible person.
■Faulty components may be replaced with original spare parts only.
Only original spare parts can guarantee that applicable safety re-
quirements are adhered to.
■Defective parts may only be replaced with original spare parts. Only
these parts guarantee that the safety requirements are satised.
Protect the unit against humidity and penetration of liquids and/or
objects. In case of contact with liquids disconnect the unit from the
power supply immediately.

7
Home S7
g
DANGER
Electric shock hazard!
Contact with live leads or components poses a risk of serious
injury or even death!
Observe the following safety precautions to avoid any electric
shock hazard:
►Do not use the unit if the mains lead or mains plug are damaged.
►On no account should the housing of the unit be opened. Electric
shock hazard if live connections are touched and/or the electrical
and mechanical conguration is changed.
►Never immerse the unit or the mains plug in water or other
liquids.
WARNING
Risk of cuts at the shredding rollers!
Observe the following safety precautions to avoid any injuries:
►Do not touch the shredding rollers.

8
HomeS7
g
2.2 Warning symbols on the unit
The following warning symbols have been attached to the unit:
General warning symbol
Follow the instructions in the operating instructions.
Only allow children to use the device under supervision.
Do not insert paper clips into the feed shaft.
Do not reach into the feed shaft.
Keep clothing away from feed shaft.
Keep loose jewellery away from the feed shaft.
Keep hair away from feed shaft.
Do not use any aerosol products on or near the device.
Do not feed CDs/DVDs into the feed shaft.
WARNING
Risk of injury
►Observe the warning symbols in order to prevent injury or dama-
ge of the unit.

9
Home S7
g
3. Installation and Assembly
■Remove all packaging materials from the device.
■Do not place the device in a hot, wet or very humid environment.
■Place the device on a level, horizontal surface so that it is stable.
■The socket must be easily accessible so that the power supply can
be disconnected quickly in case of an emergency.
■Before you connect the device, compare the connection data for
the device (voltage and frequency) on the type plate with that of
your mains power supply. This data must match to avoid damage
to the device.
■Keep the connection cable away from hot surfaces and sharp
edges.
■Lay all cables so that they do not pose a tripping hazard.
■Do not bend or crush the cable.
4. Handling and operation
4.1 Application instructions
■Observe that the thickness of the paper increases when folded,
thus possibly exceeding the maximum page capacity.
■Always wait for a shredding process to nish before starting a new
one.
■Never use the unit for longer than 3 minutes in permanent opera-
tion.
4.2 Notes on use
4.2.1 Switching on the device
■Slide the operating switch (2) to the “On/Auto” position. The cutting
rollers switch on briey. The device is ready for use.

10
HomeS7
g
4.2.2 Shred paper and plastic cards
■Insert the paper or the plastic card into the centre of the feed shaft
(4). The cutting rollers are switched on automatically.
■Let go of the paper or plastic card. The device switches back to
standby mode after shredding is completed.
NOTE!
►Empty the bin frequently in order to prevent damage to the
device.
4.2.3 Reverse run mode
NOTE!
►These modes serve to remove any blockages in the cutter
system.
■Slide the operating switch (2) to the “Rev” position. The rollers of
the paper cutting system rotate in the opposite direction.
■Pull the paper up and out of the feed shaft (4).
■To return the device to standby mode, set the operating switch (2)
back to ON/AUTO.
4.2.4 Emptying the bin
■To switch the device off, slide the operating switch (2) to the “Off”
position.
■Lift the cutting attachment off of the waste bin (1).
■Empty the bin.
■Place the cutting attachment back onto the waste bin (1).
4.2.5 Switching off the device
■Slide the operating switch (2) to the “Off” position.