
2
GOperating instruction
Thank you for choosing aHama
product.
Take your time and read the following instructions
and information completely.
Please keep these instructions in asafe place for
futurereference.
1. Explanation of warningsymbols and notes
Risk of electric shock
This symbol indicates arisk of electric shock
from touching product parts carrying hazardous
voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specichazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
•Power strip
•These operating instructions
3. Safety instructions
•Use the product only for the intended purpose.
•Donot operate the product outside the power
limits specied in the technicaldata.
•Protect the product from dirt, moistureand
overheating and use it in dry environments only.
•Donot use the product in adamp environment
and avoid splashing water.
•Donot continue to operate the product if it is
visibly damaged.
•Donot bend or crush the cable.
•Donot drop the product and do not exposeitto
any major shocks.
•Always pulldirectly on the plug when
disconnectingthe cable, never on the cable itself.
•Aswith allelectrical products, this device should
be kept out of the reach of children.
•Dispose of packaging materialimmediately in
accordance with the locally applicable regulations.
•Donot modify the product in any way.Doing so
voids the warranty.
•The product is intended for private, non-
commercial use only.
•The product is intended only for use inside
buildings.
•Donot use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
•Only use the article under moderate climatic
conditions.
•Donot use the product in areas in which electronic
products arenot permitted.
•Route allcables so that thereisnorisk of tripping.
•Never connect multiple units of this product
in series.
•The product must only be operated on asupply
network as described on thetype plate.
Risk of electric shock
•Donot open the device or continue to operate
it if it becomes damaged.
•Donot use the product if the
AC adapter,the adapter cable or the mains
cable aredamaged.
•Donot attempt to service or repair the product
yourself.Leave any and allservice work to
qualied experts.
Warning
•Only operate the product from asocket that has
been approved for the device. Thesocket must
be installed close to the product and must be
easily accessible.
•Disconnect the product from the power supply
using the On/Off switch –ifthis is not available,
unplug the power cordfromthe socket.
•Ifusing amulti-socket power strip, make
surethat the total power consumption of all
connected devices does notexceed thepower
strip's maximum throughput rating.
•Ifyou willnot be using the product for a
prolonged period, disconnect it from mains
power.