HAMPTON BAY MYRON 36LGM-L User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank
you for choosing Hampton Bay!
Item #602-647
Model #36LGM-L
USE AND CARE GUIDE
MYRON CEILING FAN
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 1／28页

2
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................3
Pre-Installation ..............................................................3
Planning Installation ................................................................3
Tools Required .........................................................................3
Hardware Included...................................................................4
Package Contents ....................................................................5
Installation ..................................................................... 6
Operation..................................................................... 12
Care and Cleaning ...................................................... 13
Troubleshooting.......................................................... 13
Safety Information
1. All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70-1999 and local electrical codes.
Electrical installation should be performed by a qualified
licensed electrician.
2. The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of
35 lbs. (16 kg). Use only UL-listed outlet boxes marked “For
Fan Support.”
3. Do not operate the reversing switch while the fan blades are
in motion. You must turn the fan off and stop the blades
before you reverse the blade direction.
4. Avoid placing objects in the path of the fan blades.
5. Electrical diagrams are for reference only. Light kits that are
not packed with the fan must be UL-listed and marked
suitable for use with the model fan you are installing.
Switches must be UL General Use Switches. Refer to the
instructions packaged with the light kits and switches for
proper assembly.
6. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box.
WARNING: To reduce the risk of electric shock, ensure
electricity has been turned off at the circuit breaker or fuse
box before beginning.
WARNING: To reduce the risk of personal injury, do not
bend the blade brackets (also referred to as flanges) during
assembly or after installation. Do not insert objects in the
path of the blades.
WARNING: To reduce the risk of fire or electric shock, do
not use this fan with any solid-state speed control device.
CAUTION: To reduce the risk of injury to person, the fan
must be mounted with a minimum of 7 feet clearance from
the trailing edge of the blades to the floor.
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 2／28页

3 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Warranty
WHAT IS COVERED
The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a
lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or
acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after
the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable
or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All
costs of removing and reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper
installation or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not
cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest
useful life when protected from varying weather conditions. A certain amount of “wobble” is normal and should not be considered a defect.
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby
disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent
permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express
warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The
retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance
except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above
exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from
state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty
must be paid by the customer.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.
Pre-Installation
PLANNING INSTALLATION
Compare all parts with the Hardware Included and Package Contents sections in this manual. If any part is missing or damaged, do not
install this fan and contact the Customer Service Team at 1-877-527-0313 or visit www.HamptonBay.com.
TOOLS REQUIRED
Hammer
Safety
goggles
Phillips
screwdriver
Flathead
screwdriver
Wire cutters
Step
ladder
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 3／28页

4
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
A
A
Blade screw 21
BB Downrod clip (preassembled to Downrod (E)) 1
CC Downrod pin (preassembled to Downrod (E)) 1
DD Collar screw (preassembled to Motor (D)) 1
EE Washe
r
2
FF Star washer 2
GG Lockwasher 2
HH Mounting bracket screw 2
II Canopy screw (preassembled to Mounting bracket (H)) 2
JJ Light kit screw (Preassembled to Motor (D)) 3
KK Wire connector 4
AA HH II JJ
BB K
K
CC DD EE FF GG
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 4／28页

5 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A
Blade fix ring
A
1
B Fan blade 5
C Blade fix ring B 1
D Moto
r
1
E Downrod 1
F Canopy 1
G Upper housing 1
H Mounting bracket 1
I Transmitter/Receiver 1 each
J Light kit 1
K Bulb 2
L Glass shade 1
A
B
C
D
E
J
K
L
F
G
HI
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 5／28页

6
Installation
1Determining the mounting method 2Attaching the blades to the blade
fix ring
WARNING: To reduce the risk of fire, electric shock, or
personal injury, mount the fan to an outlet box marked
acceptable for fan support using the screws provided with
the outlet box. An outlet box commonly used for the support
of lighting fixtures may not be acceptable for fan support
and may need to be replaced. If in doubt, consult a qualified
electrician.
If your ceiling fan does not have an existing UL-listed mounting
box, then install one using the following instructions:
□Disconnect the power by removing the fuses or turning off
the circuit breakers.
□Secure the outlet box directly to the building structure. Use
the appropriate fasteners and materials. The outlet box and
its bracing must be able to fully support the weight of the
moving fan (at least 35 lbs.). Do not use a plastic outlet
box.
□To hang your fan where there is an existing fixture but no
ceiling joist, you may need an installation hanger bar as
shown in the last figure.
□Attach each fan blade (B) to blade fix ring A (A) using blade
screws (AA). Tighten securely with a Phillips screwdriver.
Outlet Box
Outlet Box
Outlet Box
Outlet Box
RecessedMounting
Plate
Ceiling
Hanger Bar
Provide Strong
Support
B
A
AA
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 6／28页

7 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
3Attaching the blade assembly to
the motor 4Preparing the downrod
□Place the blade assembly over the motor (D).
□Place blade fix ring B (C) over the blade assembly (B).
□Secure the blade fix ring B (C) and the blade assembly (B)
to the motor (D) using blade screws (AA).
□Remove the downrod clip (BB) and downrod pin (CC) from
the downrod (E).
□Thread the downrod (E) through the canopy (F) and upper
housing (G).
D
CAA
B
E
BB
CC
E
G
F
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 7／28页

8
Installation (continued)
5Attaching the downrod assembly
to the motor 6Installing the mounting bracket
□Loosen, but do not remove the collar screw (DD) on the
collar (1) of the motor (D).
□Guide the downrod assembly into the collar (1) of the motor
(D). Ensure that all of the holes are in alignment.
□Carefully insert the downrod pin (CC) through the holes in
the collar (1) and downrod (E).
□Insert the downrod clip (BB) through the hole near the end
of the downrod pin (CC) until it snaps into its locked
position.
□Re-tighten the collar screw (DD) on the collar (1) on top of
the motor (D).
□Attach the mounting bracket (H) to the outlet box in the
ceiling using washers (EE), star washers (FF), lockwashers
(GG), and mounting bracket screws (HH). Tighten securely
with a Phillips screwdriver.
E
BB
DD
G
B
CC
1
HH
GG
FF
EE
H
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 8／28页

9 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
7
Installing the fan assembly and
receiver 8Connecting the wires
□Seat the hanger ball portion of the ball/downrod assembly
(E) in the mounting bracket socket. Ensure that the tab on
the mounting bracket (H) socket is properly seated in the
groove in the hanger ball.
□Set the codes on the transmitter and receiver (I) by moving
the switches (1) up and down. Ensure that the transmitter
and receiver are set to the same code or the transmitter
will not work.
□Slide the receiver (I) into position in the space between the
hanger ball portion of the downrod (E) and the mounting
bracket (H).
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before wiring.
If you are not sure the electrical box and fan are grounded,
contact a licensed electrician for advice. They must be
grounded for safe operation..
WARNING: Each wire nut (wire connector) supplied with
this fan is designed to accept up to one 12 gauge house
wire and two wires from the fan. If you have larger than 12
gauge house wiring or more than one house wire to connect
to the fan wiring, consult an electrician for the proper size
wire nuts to use..
□Connect the ground conductor of the 120-Volt supply (this
may be a bare wire or a wire with green colored insulation)
to the green ground lead(s) (PP) of the fan.
□Connect the fan motor white wire (MM) to the receiver (I)
white wire (MM) using a wire connecting nut (KK).
□Connect the fan motor black wire (LL) to the receiver (I)
black wire (LL) using a wire connecting nut (KK).
□Connect the fan motor blue wire (OO) to the receiver (I) blue
wire (OO) using a wire connecting nut (KK).
□Connect the receiver (I) black wire (NN) to the supply black
(hot) wire (LL) using a wire connecting nut (KK).
□Connect the receiver (I) white wire (MM) to the supply white
wire (neutral) (MM) wire using a wire connecting nut (KK).
□After connecting the wires, spread them apart so that the
green (PP) and white wires (MM) are one side of the outlet
box (1) and the black wire (LL) is on the other side.
□Turn the wire connecting nuts upward, and carefully push
the wiring into the outlet box (1).
E
I
1
H
On Dip
Up
1234
Down
I
1
LL
LL
NN
OO
MM
MM
MM
PP
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 9／28页

10
Installation (continued)
9Attaching the canopy to the
mounting bracket
□Remove one of the preassembled canopy screws (II) from
the end of the mounting bracket (H). Loosen, but do not
remove, the second canopy screw (II).
□Raise the canopy (F) up to the ceiling and slide the slotted
hole in the canopy through the loosened canopy screw (II)
and twist the canopy (F) to lock it in place on the screw (II).
□Reattach the other canopy screw (II) to the canopy (F) and
tighten both screws securely with a Phillips screwdriver.
10Attaching the light kit to the fan
□Loosen, but do not remove, two of the light kit screws (JJ)
attached to the light kit plate (1) portion of the motor (D).
□Remove the third light kit screw (JJ) from the light kit plate
(1) portion of the motor (D).
□Raise the light kit (J) up to the motor (D) and connect the
two wires (1) from the light kit (J) to the two wires (2) from
the motor (D). Ensure that the colors of the wires match and
that they are securely connected.
□Tuck the wires into the motor (D), align the slots in the light
kit (J) with the loosened light kit screws (JJ), and twist to
lock in place.
□Reinstall the previously-removed light kit screw (JJ) and
securely tighten all light kit screws (JJ) with a Phillips
screwdriver.
II
I
II
H
H
F
II
II
1
D
JJ
JJ
D
2
1
J
JJ
DPA12122002 新版 SIZE:216x280mm 80g模糙纸 单黑色 28P 骑马钉 2013-4-16 第 10／28页