HAMPTON BAY 1007 791 258 User manual

Item # 1007 791 258
Model # GGHL00019
USE AND CARE GUIDE
ARROW GAZEBO
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

.
!
WARNING:
gazebo fabric.
!
WARNING: This application of any foreign substance to the
ineffective.
!
WARNING: This gazebo is made with fabric that meets
proof. The fabric will burn if left continuous contact with any
2 YEAR FRAME AND FABRIC WARRANTY
WHAT IS COVERED
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for two year.

GG
AA M6x15 combination bolt
Description QuantityPart
BB M6x10 combination bolt and nut
CC M6x20 combination bolt and nut
4+1
8+1
4+1
DD M6x30 combination bolt and nut
EE M6x35 combination bolt and nut
FF Ground spike 8+1
12+1
16+1
2 GG Hex wrench
8+1
HH Corkscrew ground spike
HH

Assembly
5HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembling the corner panels
Connect the panels (A and B) by lining up the labels near the top, middle, and bottom of the panels and connecting them with M6x35
combination bolts and nuts (EE).
Repeat for the remaining sets of panels (A and B).
Secure the four corner connectors (I) onto the top corners of the assembled panels (A and B) with M6x20 combination bolts and nuts (CC).
1
NOTE: Loosely tighten the bolts.
B
A
2
1
A
B
EE
I
EE
A
B
CC
I

Assembly (continued)
6
Connecting the corner panels
Line up the two holes on the two ends of the beam (C) with the corresponding bolt holes on the side tubes of panels (A and B).
Attach the panels to the beam (C) using M6x30 combination bolts and nuts (DD).
Repeat for the remaining three beams (C).
2
NOTE: Loosely tighten the bolts.
C
C
C
C
B
A
C
DD
A&B

Assembly (continued)
7HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembling the canopy
Insert the four canopy spokes (D) into the four long tubes of the lower canopy hub (H).
Insert the four canopy frames (E) into the four short tubes of the lower canopy hub (H).
Make sure all push pins are in place.
3
E
E
E
D
D
D
D
DD
D
E
E
E
E
H
H
E
D

Assembly (continued)
8
Placing the large fabric cover
Place the large fabric cover (L) loosely on top of the assembled frame.
4
NOTE: Do not fully extend the fabric cover.
D
D
D
D
E
E
E
L

Assembly (continued)
9HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembling the small canopy
5
Insert the three short canopy spokes (G) into the upper canopy hub (J). Seefigure 1.
Install the small fabric cover (K) on the three short canopy spokes (G), and pull the three corresponding pouches of the small fabric
cover (K) onto the ends of the three short canopy spokes (G). See figure 2.
Pull the remaining pouch of the small fabric cover (K) onto the end of the remaining short canopy spoke (G). See figure 3.
Insert the remaining short canopy spoke (G) into the upper canopy hub (J). See figure 4.
Ensure all snap buttons are in place. Screw the top arrow (P) onto the upper canopy hub (J). See figure 5.
Fig. 5
K
P
J
GFig. 4
Fig. 3
Fig. 2
Fig. 1
G
GG
J
K
G
K
P
J

Assembly (continued)
10
Attaching the small canopy
Attach the four short canopy spokes (G) to each of the regular canopy spokes (D) by inserting the connecting peices of (G) into (D).
Ensure all push pins are secure.
6
G
L
D
E
D
D
E
D

Assembly (continued)
11 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Attaching the canopy to the top of the panel structure
Place the structure assembled in step 6 on top of the assembled panel structure from step 2.
Insert the four canopy spokes (D) into the four corner connectors (I). Ensure all push pins are in place.
Secure the metal pieces on the ends of each canopy frames(E) onto the four beams (C) using M6x15 combination bolts (AA).
Place the corner shelves (O) in the assembled panels.
7
NOTE: Loosely tighten the bolts.
BA
O
C
AA
C
E
ID
2
1
3

Assembly (continued)
12
Attaching the track tubes
Connect the end of a track tube (F) to a corner connector (I).
Insert the other end of the track tube (F) into the bracket on the end of the canopy frame (E), and secure them together by using
M6x10 combination bolts and nuts(BB).
Repeat step 8 for the remaining track tubes (F).
8
NOTE: You may opt to tighten all bolts now before
the fabric cover is attached to the frame of the gazebo.
1
F
F
I
EBB
F
F
C
C
B
A
2

Assembly (continued)
13 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Hanging the netting
Put up the nettings (M) onto the track tubes (F) using the plastic rings (N).
Hang the fabric buckles in the middle of the nettings (M) onto the bolts of the corner connectors(I).
9
IN
M
M
F

Assembly (continued)
14
Attaching the large fabric cover
Pull the large fabric cover (L) onto the corner connectors (I).
Attach all the velcro of the large fabric cover (L) on the top frames and the top bars of the panels (A and B).
Screw the four corner arrows (Q) onto the four corner connectors (I).
Once all bolts and nuts are in place, tighten all bolts completely.
10
Q
Q
L
I

Assembly (continued)
15
Grounding the gazebo
11
Slightly lift up the corners of the panels (A and B), and put thecorkscrew ground spikes (HH) through the holeon the flat bars on the
bottom of the panels (A and B). Twist the corkscrew ground spikes (HH) down while the panels are lifted up. Next, twist the corkscrew
ground spike (HH) into the ground until the panels (A and B) are secure. Once the corkscrew ground spikes (HH) are secured, pound
the ground spikes (FF) through the holes on the flat bars on the bottom of panels (Aand B).
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
AB
NOTE: You may opt to insert a ground spike (FF) though the
loop in the corkscrew ground spike (HH) to assistin twisting the
corkscrew ground spike (HH) into the ground.
Care and Cleaning
For the best results, clean the frame and fabric with a damp cloth and dry thoroughly. This will help prevent mildew by removing
dirt particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Keep the gazebo away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Store the gazebo in a dry, sheltered place when not in use.
FF
HH
HH
12
HH
FF

Questions,problems, missing parts? Before returning to the store,
callHampton Bay Customer Service.
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday