HAMPTON BAY SANTA MARIA S5-ADQ10801 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this swivel rocker.
We strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item #193115
Model #S5-ADQ10801
USE AND CARE GUIDE
SANTA MARIA 4-PIECE SWIVEL ROCKER
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
HAMPTONBAY.COM

2
Table of Contents
Table of Contents
Warranty
What is Covered
What is Not Covered
Pre-Assembly
Planning Assembly
Hardware Included
Package Contents
................................2
..............................................2
.....................................2
...............................2
......................................3
..................................3
..................................3
...................................4
Assembly
Maintenance
Care and Cleaning
Troubleshooting
.............................................5
.......................................6
..............................6
..................................6
5 Year Frame / 1 Year Fabric Limited Warranty
What is Covered
We warrant the frame to be free of manufacturing defects to the original purchaser for five years and the fabric for one year.
What is Not Covered
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-877-527-0313 or visit www.HamptonBay.com.
Warranty

3
Pre-Assembly
PLANNING ASSEMBLY
Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a non-abrasive surface to avoid
scratching. If you are missing any parts or are unsure how to proceed with the assembly, call our Customer Service Team at 1-877-527-0313.
Do not attempt assembly if any parts are missing or damaged.
Two people may be required to assemble the chairs.
Damage to welds or frames resulting from over tightened bolts or improper assembly is not covered under our warranty. Please read all
instructions carefully before assembly. If you have any questions regarding your assembly, call our Customer Service Team at 1-877-527-0313.
NOTE: Hardware not shown to actual size.
HARDWARE INCLUDED
Part Description Order Part # Quantity
5/16 in. x 43 mm Bolt
Ø8.0 x 2.3 mm Spring Washer
Metal Plate
5/16 in. Nut
Bolt Cover
Hex Wrench-1
Hex Wrench-2
4
4
4
4
8
1
1
Rocker Plate (Preassembled)
Cover (Preassembled)
Foot Cap (Preassembled)
AA
BB
CC
DD
EE
FF
GG
HH
I I
JJ
KK M5 x 25 mm Bolt (Preassembled)
HW0450
HW0003
HW0002
HW0015
HW0028
HW0008
HW0007
G0228
FC0448
FC0014
HW0088
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
____AA
____I I ____JJ ____KK
____BB ____CC ____DD ____EE ____FF ____GG
____HH

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Order Part # Quantity
Chair Frame
Swivel Base
1
1
A
B
AR19521
AR19522
B
A

5
Assembly
2Assembling the swivel base
and setting the chair frame on it
3
Tightening the nuts to the bolts
□ The four metal plates (CC) must be installed in the proper
location. Read this step and carefully examine the diagrams in
steps 2 and 3.
□ Place a metal plate (CC) on the topside of the “U” bar (1),
aligning the holes in the metal plate (CC), with the holes in
the “U” bar (1), through the holes in the rocker plate (HH) and
then, most importantly, through another metal plate (CC)
which must be placed directly beneath the rocker plate (HH).
□ Add a spring washer (BB) and a nut (DD) to each bolt. Hand
tighten the nuts 3-4 revolutions only.
□ Repeat the same procedure on the other side.
1Preparing the swivel base
□ Place the swivel base (B) on a flat, solid surface.
□ Ensure the rocker portion of the swivel base (B) is positioned
all the way into the swivel base (B). It may have shifted or
vibrated out during shipment.
□ Note the arrow labels on the “U” bar (1) and the rocker
assembly. Also note the horseshoe shape of the rocker plate
(HH).
□ Point the open end of the horseshoe away from you.
□ The arrows on the rocker assembly shound be pointing
towards you.
□ Set the chair frame on the rocker assembly with the front of
the seat facing you and the arrows on the “U” bar (1)
pointing towards you.
□ If the chair frame has been properly positioned on the rocker
assembly, all arrows on the “U” bar and rocker assembly will
be pointing in the same direction.
B
A
EE
1
BB
DD
CC
CC
HH
AA
1
CAUTION: Failure to place metal plates under rocker plates and above the rocker plates exactly as shown in diagram
will cause the bolt heads and nuts to damage the structure of the rocker plates. Damage due to over tightening of
bolts or improper assembly could cause injury and may void your warranty.
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.

6
Maintenance
FRAME:
Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the frames. To thoroughly drain the frames, remove the foot
caps and tilt the frames, if necessary, to remove all water. This is critical. Water allowed to accumulate inside the frames and then exposed to
sub-freezing temperatures can cause damage to the frame tubing. Such damage is not covered under the warranty. Always clean, drain, and dry
thoroughly before storing for the winter. For best results, always store or cover your furniture when not in use. We recommend commercially
available outdoor furniture covers. Any small nicks or scratches can be covered with a light application of touchup paint.
FABRIC (CUSHIONS/SLINGS):
The best way to maintain the beauty of cushions and slings is to store them in a dry area and out of the elements when not in use or cover with
commercially available outdoor furniture covers.
Care and Cleaning
FRAME:
Use mild soap and warm water. Do not use abrasive materials, cleansers, or bleach products. Rinse with clean water and dry thoroughly.
FABRIC (CUSHIONS/SLINGS):
Wipe minor spills immediately. Clean with mild soap, warm clean water, and a soft cloth. Do not use abrasive materials, cleansers, or bleach
products. Although fabric has been treated to resist stains, occasional use of commercially available fabric cleaners may be necessary. Follow the
manufacturer's instructions.
Troubleshooting
If your chair is not rocking properly, double-check your assembly procedure, especially Step 2. If the chair rocks too far forward or is difficult to
rock backwards, you have probably installed the seat frame backwards on the rocker assembly.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.

Item #193115
Model #S5-ADQ10801
USE AND CARE GUIDE
SANTA MARIA 48 IN. ROUND CAST TOP DINING TABLE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this dining table.
We strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

2
Table of Contents
5 Year Frame / 1 Year Tabletop Limited Warranty
What is Covered
We warrant the frame to be free of manufacturing defects to the original purchaser for five years and the tabletop for one year.
What is Not Covered
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commer-
cial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-877-527-0313 or visit www.HamptonBay.com.
Warranty
Table of Contents
Warranty
What is Covered
What is Not Covered
Pre-Assembly
Planning Assembly
Hardware Included
Package Contents
................................2
..............................................2
.....................................2
...............................2
......................................3
..................................3
..................................3
...................................4
Assembly
Maintenance
Care and Cleaning
.............................................5
.......................................6
..............................6

3
Pre-Assembly
PLANNING ASSEMBLY
Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a non-abrasive surface to avoid
scratching. If you are missing any parts or are unsure how to proceed with the assembly, call our Customer Service Team at 1-877-527-0313.
Do not attempt assembly if any parts are missing or damaged.
Two people may be required to assemble the table.
Damage to welds or frames resulting from over tightened bolts or improper assembly is not covered under our warranty. Please read all
instructions carefully before assembly. If you have any questions regarding your assembly, call our Customer Service Team at 1-877-527-0313.
NOTE: Hardware not shown to actual size.
HARDWARE INCLUDED
Part Description Order Part # Quantity
1/4 in. x 18 mm Bolt
1/4 in. Nut
Ø6.5 x 1.0 mm Washer
Bolt Cover
Nut Cover
Hex Wrench
Hex Bolt Driver
Touch-up Paint
Foot Cap (Preassembled)
8
8
16
8
8
1
1
1
4
AA
BB
CC
DD
EE
FF
GG
HH
II
HW0035
HW0014
HW0004
HW0105
HW0027
HW0009
HW0006
G0003
FC007
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
____CC ____EE
____HH
____DD
____II
____GG
____BB____AA ____FF

4
Pre-Assembly (continued)
PACKAGE CONTENTS
B
C
A
Part Description Order Part # Quantity
Tabletop
Leg Connector Bracket
1
1
A
B
AT71472
AT71473
Table Leg 4C AT71474

5
Assembly
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
2
Assembling the leg connector bracket
3
Tightening the nuts to the bolts
□ Use the hex bolt driver (GG) and hex wrench (FF) to tighten all
nuts (BB) and bolts (AA). (Do not over tighten. Over tightening
may strip bolts.)
□ Cover all nuts (BB) and bolts (AA) with covers.
1Assembling the table legs
□ Place the tabletop (A) up-side down on a flat, solid surface.
□ Attach the table leg (C) to the tabletop (A) by using the
bolts (AA) and washers (CC) as shown in the diagram.
□ Guide the bolts (AA) through the holes in the table leg (C),
and into the pre-drilled holes in the tabletop (A).
□ Hand tighten three to four turns only. (Do not tighten
completely. Some adjustments may be necessary to ensure
proper alignment of the table legs.)
□ Repeat for the other three legs.
□ Attach a leg (C) to the leg connector bracket (B) by carefully
guiding the bolts (AA) through the holes, in the leg (C)
connector bracket ( B).
□ Add a washer (CC) and a nut (BB) to the end of each bolt.
□ Hand tighten three to four turns only. (Do not tighten
completely.)
□ Repeat on the other three legs.
II (Preassembled)
A
DD
AA
CC
B
C
CC
BB
EE

6
Maintenance
Periodically clean and dry thoroughly. Be sure to drain any water accumulated inside the frame. To thoroughly drain the frame, remove the foot
caps and tilt the frame, if necessary, to remove all water. This is critical. Water allowed to accumulate inside the frame and then exposed to
sub-freezing temperatures can cause damage to the frame tubing. Such damage is not covered under the warranty. Always clean, drain, and dry
thoroughly before storing for the winter. For best results, always store or cover your furniture when not in use. We recommend commercially
available outdoor furniture covers. Any small nicks or scratches can be covered with a light application of touch-up paint.
Care and Cleaning
Use mild soap and warm water. Do not use abrasive materials, cleansers, or bleach products. Rinse with clean water and dry thoroughly.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.