HAMPTON BAY 69-231O-473 User manual

SEAWARD CHAIR + OTTOMAN
Model # 69-231O-473
Item # 1007746568
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this patio set. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
THANK YOU
USE AND CARE GUIDE

2
Table of Contents
Planning Assembly
Maintenance 11
11
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
□Close supervision is necessary when this furnishing is used by or near children, or disabled persons, if applicable.
□Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
□Do not move the patio set while it is occupied. Failure to obey this caution could result injury.
SET UP YOUR FURNITURE PROPERLY
□Ensure that all parts are assembled properly and fully tightened as per the instructions.
□When placing in the desired location, ensure that all legs are resting on the same surface.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be re-tightened fully before additional use.
OBSERVE WEIGHT LIMITS
The weight limits for the following products are listed below:
Assembly
Care & Cleaning
□Chair: 275 lb □Sofa: 825 lb
□Swivel Chair: 275 lb
□Loveseat: 550 lb □Chaise Lounge: 300 lb
□Ottoman: 150 lb □Dining Table: 100 lb
□Table: 50 lb □Dining Chair: 200 lb
□Daybed: 550 lb
□Rocking Chair: 275 lb
Important Safety Informations
WARNING: This product can expose you to chemicals including chromium (hexavalent compounds) and benzene, which are known to the
state of california to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65warning.ca.gov/furni-
ture.
WARNING: This set was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is
intended for normal outdoor use; However, the manufacturer recommends storing and/or covering this product when any formidable/severe
weather is approaching.
CAUTION: If you overload your furniture, injuries
can occur.
2
3
4,5,8,9
4,8
4,8
2
Package Contents 5,9
..................................... 6,7,10 .......................................
.......................................
.....................................
.....................................
.................................
.................................
.................................
............................................
....................................
Table of Contents
Safety Information
Warranty
Pre-Assembly
Hardware Included

Please contact 1-855-HD-HAMPTONBAY for further assistance.
HAMPTONBAY.COM
THREE YEAR FRAME, WEAVE AND FABRIC LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for three (3) years. For glass table top we warrant 30
days from the date of purchase.
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under
this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.
3
Warranty

4
To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly.
PLANNING ASSEMBLY
HARDWARE INCLUDED
Pre-Assembly 69-231O-473-chr
Part Description Quantity
Bolt (Ø8×40 mm)AA 8
Bolt (Ø8×30 mm)BB 2
Washer (Ø8 mm)CC 10
Allen wrench (Ø5 mm)DD 1
Plastic cap (Ø8 mm)EE 6
AA BB CC DD EE

5
Pre-Assembly 69-231O-473-chr
PACKAGE CONTENTS
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
BackA 1
SeatB 1
Left ArmC 1
Right ArmD 1
Seat cushionE 1
A
B
CD
E
F
Back cushionF 1
Part Description Quantity

1 2
Attaching the seat and back Attaching the left and right arm
6
Assembly 69-231O-473-chr
□
□
□
Attach the left arm (C) and right arm (D) to the seat (B) and back (A)
by aligning side holes on the seat (B) and back (A) and inserting
bolts (AA) with washers (CC).
Tighten half way using the Allen wrench (DD).
Do not tighten completely at this stage.
□
□
□
Attach the back (A) to the seat (B) by aligning holes on the
seat (B) with the holes on the back (A) and inserting bolts (BB)
with washers (CC).
Tighten half way using the Allen wrench (DD).
Do not tighten completely at this stage.
Securing the front skirt
3
□
□
□
Secure the front skirt of seat (B) to the left arm (C) and right
arm (D) using bolts (AA) and washers (CC).
Tighten half way using the Allen wrench (DD).
Do not tighten completely at this stage.
Completing the assembly
4
□
□
□
Check the assembled chair and make adjustments if needed.
Fully tighten all bolts (AA) and (BB) with the Allen wrench (DD).
Attach all plastic caps (EE).
A
B
CCBB DD
A
B
CD
CC AA
DD
AA
DD
B
A
CD
AA
AA
DD
CC
CC
EE
DD
EE
DD
BB
AA
CC

5
Installing the seat cushion
and back cushion
7
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
Assembly 69-231O-473-chr
□
□
□
Place the seat cushion (E) on the seat (B).
Place the back cushion (F) on the back (A).
The chair is now ready for your enjoyment.
F
E

8
To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly.
PLANNING ASSEMBLY
HARDWARE INCLUDED
Pre-Assembly 69-231O-473-otm
Part Description Quantity
Bolt (Ø8×40 mm)AA 8
Washer (Ø8 mm)CC 8
Allen wrench (Ø5 mm)DD 1
AA CC DD

9
Pre-Assembly 69-231O-473-otm
PACKAGE CONTENTS
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM
SeatG 1
Left ArmH 1
Right ArmI 1
Seat CushionJ 1
G
IH
J
Part Description Quantity

1 2
Attaching the left arm Attaching the right arm
10
Assembly 69-231O-473-otm
□
□
□
Attach the right arm (H) to the seat (G) by aligning holes on the
seat (G) with the holes on the right arm (H) and inserting
bolts (AA) with washers (CC).
Tighten half way using the Allen wrench (DD).
Do not tighten completely at this stage.
□
□
□
Attach the left arm (I) to the seat (G) by aligning holes on the
seat (G) with the holes on the left arm (I) and inserting
bolts (AA) with washers (CC).
Tighten half way using the Allen wrench (DD).
Do not tighten completely at this stage.
Completing the assembly
3
□
□
□
□
Check the assembled ottoman and make adjustments if needed.
Fully tighten all bolts (AA) with Allen wrench (DD).
Place the seat cushion (J) on the seat (G).
The ottoman is now ready for your enjoyment.
G
I
AA
CC
DD
AA
CC
GH
IAA
CC
DD
AA
CC
J