HAMPTON BAY LONGFORD A106003600 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this Pergola. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Hampton Bay!
Item# 1004 662 155/1004 649 550/1004 649 549/1004 547 739
Model #A106003600
USE AND CARE GUIDE
10X12 LONGFORD PERGOLA
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

2 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................2
What is Covered.........................................................2
What is Not Covered..................................................2
Pre-Assembly................................................................3
Planning Assembly ....................................................4
Hardware Included.....................................................4
Package Contents......................................................5
Assembly.......................................................................7
Care and Cleaning ...................................................... 24
1. At least 2 persons are required for this assembly.
2. Some parts may contain sharp edges. Wear
protective gloves.
3. When assembling and using this product, basic
safety precautions should always be followed to
reduce the risk of personal injury and damage to
equipment. Please read all instructions before
assembly and usage.
DANGER: This unit is heavy! Do not assemble this
item alone.
WARNING: While this pergola is manufactured to
withstand winds through only the supplied ground
stakes, in areas subject to frequent severe weather,
securing the pergola to a deck, concrete patio or
footings should be considered. Snow must be cleared
off regularly during snowy days. Remove the snow at
the top when it is thicker than 4 inches. In order to
avoid damage, use a plastic snow rake to remove
excessive snow and ice buildup from roof and keep
away from falling debris.
2 YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your
item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be
free from defects in material or workmanship for a period of 2 years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling
or disassembling the product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit HAMPTONBAY.COM.
Production Number: 2020BPCN10
Safety Information
NOTICE: For outdoor use only.
WARNING: Keep all flame and heat sources away
from this pergola fabric. This pergola is made with
fabric that meets CPAI-84 specifications for flame
resistance. It is not fire proof. The fabric will burn if
left in continuous contact with any flame source. The
application of any foreign substance to the pergola
fabric may render the flame-resistant properties
ineffective.
Warranty
CAUTION: Do not climb on top of the pergola. Falling
off the pergola can result in serious injury, possibly
even death.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
TOOLS NEEDED
IMPORTANT
Requires at least 2 persons for the installation work. Approximate installation time：2~3 hours.
Provided in hardware pack

4 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD
EE FF GG HH
II JJ KK LL
MM NN Z1 Z2
Part
Part Number
Description
Quantity
Additional
Hardware
AA
H36035C31
M6 X 35 Screw
40
2
BB
H36060C31
M6 X 60 Screw
16
1
CC
H40080C31
M6 X 80 Screw
8
1
DD
H11040B31
M5 X40 Screw
64
4
EE
H02045C11
M6 X 45 Bolt
16
1
FF
H02020C11
M6 X 20 Bolt
8
1
GG
H02040C11
M6 X 40 Bolt
4
1
HH
H11025B11
M5 X 25 Screw
40
2
II
H02055C11
M6 X 55 Bolt
14
1
JJ
H09012C11
M6 X 12 Bolt
4
1
KK
H19001C11
M6 Flat Washer
138
7
LL
P12401A01001
￠8*180 Stake
8
0
MM
H06015C11
M6 X 15 Bolt
36
2
NN
P15601A27000
Sticker
1
0
Z1
H00001C12
M6 Wrench
2
0
Z2
H00002C12
M6 Allen key
1
0

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
PACKAGE CONTENTS
02
C
D
F1
I3
J
K
F2
G1
E
01
I1
H
I2
G2
M
N
L1
L2

6 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly (continued)
Part
Part Number
Description
Quantity
01
P000200217
Post
4
02
P006100082
Base Cover
16
C
P000100135
Base
4
D
P000300031
Cover
4
E
P005000197
Arc Support
8
F1
P000400490
Right Curved Frame
2
F2
P000400491
Left Curved Frame
2
G1
P000400488
Right Beam
2
G2
P000400489
Left Beam
2
H
P005600116
Decorative Profile
8
I1
P000600665
Right Cross Beam
7
I2
P000600666
Left Cross Beam
7
I3
P000500563
Cross Beam Connector
7
J
P005700187
Guide Tube
4
K
P005700564
Guide Tube Connector
8
L1
P005700188
Canopy Tube 1
2
L2
P005700189
Canopy Tube 2
2
M
P001100279
Canopy
1
N
P000500562
Connector
4

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
1
Attaching the Base
Attach the Base (C) to the Post (01) using screws (HH). It is suggested to pre-drill holes for easier installation of the base.
NOTE: The end of the posts are labeled TOP and BOTTOM
Top
Bottom

8 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
2
Attaching the Covers
Insert the Cover (D) into the top of the Post (01), but don’t assemble.
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.
Top
Bottom
Top

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
3
Connecting the Beams and Connector
Connect the Beams (G1&G2) with the Connector (N) using bolts (MM) and flat washers (KK).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

10 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
4
Connecting the Curved Frames and Connector
Connect the Curved frames (F1&F2) with the Connector (N) using bolts (FF&GG) and flat washers (KK).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

11 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
5
Connecting the Curved Frames and Posts
Attach the Curved frames (F1&F2) with the Post (01) using screws (AA) and flat washers (KK).
NOTE: Pay close attention to the hole placement to ensure proper
assemble. Also pay attention to the direction of the curved frames.
Correct
Curved frame direction
Wrong

12 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
6
Attaching the Beams
Attach the beams (G1&G2) to the post (01) using screws (AA) and flat washers (KK).
NOTE: Ensure post is oriented properly before installing beams, inside of
posts must have holes for canopy guide tube.

13 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
7
Attaching the Decorative Profile
Attach the decorative profiles (H) to the post (01) using screw (AA) and washer (KK). Attach the Cover (D) to the post (01)
using screw (HH). It is recommended to predrill holes to install the Cover (D).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

14 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
8
Attaching the Arc Support
Attach the arc support (E) to the curved frames (F1&F2), beams (G1&G2) and post (01) using bolts (EE), screws (BB) and
flat washers (KK).
NOTE: To avoid destroying the finish, do not put the parts on the ground directly. Make sure the angle between the curved
frame and post is 90°when attaching the Support, triangular rule can be used if necessary.

15 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
9
Connecting the Cross beam
Connect the cross beam (I1&I2) with cross beam connector (I3) using bolts (MM) and flat washers (KK).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

16 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
10
Attaching the Cross Beams
Attach the cross beams (I1&I2) and curved frames (F1&F2) using bolts (II) and flat washers (KK).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

17 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
11
Connecting the Canopy Tube
Connect the canopy tube 1 (L1) with the canopy tube 2 (L2) using bolt (JJ) and flat washer (KK).
`
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

18 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
12
Covering the Canopy
Cover the canopy (M) on the pergola.
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

19 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
13
Inserting the Canopy Tube
Insert the canopy tubes (L1&L2) into the canopy (M).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.

20 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued)
14
Inserting the Guide Tube
Insert the Guide tube (J) into the Canopy tubes (L1&L2). Then connect the Guide tube (J) and Guide tube connector (K)
with Post (01) using screws (CC). Then secure the guide tube connect (K) to the post (01) using screw (HH). For easier
installation it is recommended to predrill holes for screw bolt (HH) to make the Guide tube connector (K) level.
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly. You may need to slide the canopy back and forth a few times to
ensure it is square.