HAMPTON BAY SPENCER HILL GG-11076-AAP User manual

USE AND CARE GUIDE
Item #
1006 471 543
GG-11076-AAP
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-841-1350
HAMPTONBAY.COM
THANK YOU
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
SPENCER HILL GAZEBO
Model #
gaz ebo

2
Table of Contents
Table of Contents .................................. . 2
Important Safety Instructions ................................. .2
Warranty ......................................... . 2
What is covered .................................. . 2
What is not covered ............................... . 2
Important Safety Instructions
2.
SAVE THESE INSTRUCTIONS
Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1.
Pre-Assembly.
.................................. ..3
Planning Assembly
............................. ..3
Hardware Included ................................3
Package Contents .................................4
Assembly ...................................... ..
Care and Clea.ning ..................................
5
7710
Warranty
THIS IS A RESIDENTIAL WARRANTY ONLY AND THIS WARRANTY DOES NOT APPLY TO COMMERCIAL
USE
YEAR FRAME LIMITED WARRANTY
WHAT IS COVERED
Contact the Customer Service Team at 1- 80 0 - 84 1-1350 or visit www.hamptonbay.com.
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing, and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
For a copy of our full limited warranty, please contact our customer service team below.
We warrant the frame to be free of manufacturing defects to the original purchaser for three years.
3
Warning
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the ammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any ame source.
The application of any foreign substance to the tent fabric may render the ame-resistant properties ineffective.

3
Pre-Assembly
NOTE: More than one person may be required to
complete the assembly of this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Verify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface to
avoid scratching.
_
AA
_
BB
M6 x 15 mm
_CC _DD _EE _FF _GG
Part Description Quantity
AA M6 x 12 mm 32
BB 7 9
CC 8
DD
M6 x 30 mm
40
M6
8
12
1
EE
F F
G G
bolt
combination bolt
combination bolt
nut
M6 Allen wrench
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
M6 Hex wrench
S take
_HH
NOTE: Tools and protective articles below
are not provided.
TOOLS REQUIRED
To prevent damage, place all parts on a soft surface duing assembly.
Tools required for assembly ( not included) : Allen wrench ( included) , hammer, screwdriver, stepladder, level and other safety items such
as gloves, safety goggles and hardhat.
Hammer Screwdriver Hardhat Safety goggles G loves Stepladder L evel
HH
M5 x 12 mm bolt
1

Pre-Assembly
4
PACKAGE CONTENTS
Part Description Quantity
B Long left beam
4
C
2
A Post
2
D
2
E
2
F
4
2
2
4
H
(continued)
J
ＧＨ
Long right beam
Leg base plate
G
AB
C
DE
FJ
I
I
Top diagonal support bar 1
U shape clip 1
1
K
K
2
4
4
4
L
Mosquito Net 1
4
4
LM
N
S hort middle support bar
U shape clip 2
Big canopy cover
M
S mall canopy cover
N
4
Mosquito Net 2
B1
C1
B1
C1
P
Q
R
S
T
U
V
O
OPQRSTUV
4
4
36
1
2
1
2
Top support bar
S hort right beam
S hort left beam
Long middle support bar
Top diagonal support bar 2
Top support bar connector
Corner connector
Beam connector
Inner connector
Left diagonal support bar
Right diagonal support bar
Plastic hook
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.

Assembly
Attaching the short beams
1
Attach the short left beams ( C) and the short right beams ( C1) with the beam
connector ( L) using the M6 x 15 mm combination bolts ( BB) . F ully tighten all the bolts with an M6 Allen wrench ( G G ) .
Attaching the U shape clips and leg base plates to the posts
2
Attach the U shape clips 1( P) and leg base plates ( K ) to the posts ( A) using the M6 x 15 mm combination
□bolts ( BB) with an M6 Allen
F ully tighten all the bolts.
5HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
BB
P
BB
BB
BB
A
A
K
A
□Hang the plastic hooks ( R) to the short beams ( C and C1) .
C1
C1
C
C
BB
R
R
L
□Please ensure all the posts are assembled correctly.
wrench ( F F ) .

Attaching the short beams to the posts
3
Attach the short beams ( C and C1) to the posts ( A) using the M6 x 12 mm bolts ( AA) .
□
□F ully tighten all the bolts with an M6 Allen wrench ( G G ) .
(continued)
Assembly
Attaching the diagonal support bars
4
Attach the left and right diagonal support bars ( N and O) to the posts ( A) and short beams ( C and C1) using the M5 x 12 mm bolts ( EE) .
□
□F ully tighten all the bolts with an M6 Allen wrench ( G G ) .
6
C
AA
C1
CC1
AA
AA
AA
C1 C
N
O
EE
EE
EE
EE
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.

5
(continued)
Assembly
Attaching the long beams to the posts
Attach the long left and right beams ( B and B1) to the posts ( A) using the M6 x 12 mm bolts ( AA) .
□
□F ully tighten all the bolts with an M6 Allen wrench ( G G ) .
6
Attaching the long beams
□
7
Attach the left and right diagonal support bars ( N and O) to the posts ( A) and the short beams ( C and C1) using the M5 x 12 mm bolts ( EE) .
□
C1
O
N
AA
C
EE
EE
EE
EE
AA
B or B1
B
B1
BB
B1
B1
B
B
C
C
C1
C1
L
L
RR
Attach the long left beams ( B) and long right beams ( B1) with the beam connector ( L) .Hang the plastic hooks ( R) to the long beams ( B and B1) .
using the M6 x 15 mm combination bolts ( BB) . F ully tighten all the bolts with an M6 Allen wrench ( G G ) .
BB
A
A
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.

8HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
7
(continued)
Assembly
8
Attaching another U shape clips to the beams
□
□
Attaching the top support bars
□Attach the top diagonal support bars 1 ( D) to the support bars 2 ( G ) using the M6 x 15 mm combination bolts ( BB) .
□F ully tighten all the bolts with an M6 Allen wrench ( G G ) .
Attach the U shape clips 2 ( Q ) to the beams using M6 x 15 mm combination bolts ( BB) . Loosely tighten the bolts.
Attach the corner connector ( ) to the posts ( A) using the M5 x 12 mm bolts ( EE) . F ully tighten the bolts.
BB Q
J
J
BB
M
D
Ｇ
EE
□Please ensure all the four top diagonal support bars 1( D) are attached to all the four supprt bars 2 ( G ) correctly.

Assembly
6
9
(continued)
9
10
Attaching the top support bar connectors to top support bar
□Attach the top support bar connectors ( I) to the top support bar ( H) using the M6 x 15 mm combination bolts ( BB) .
Attaching the top diagonal support bars to the top support bar connectors
6
□
□
BB
BB
BB
Ｈ
I
I
CC
D
DD
□F ully tighten all the bolts with an M6 Allen wrench ( G G ) .
Attach the top diagonal support bars ( D and G ) to the top support bar connectors ( I) using the M6 x 15 mm combination bolts ( BB) .
Attach the top diagonal support bars ( D and G ) to the U shape clips 1 ( P) on the posts by using the M6 x 30 mm bolts ( CC) and nuts ( DD) .
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.

Assembly
6
(continued)
11
Attaching the short middle support bars to the top support bar connectors
12
6
10
BB
E
E
E
DD
CC
BB
F
F
DD
CC
6
□
□
Attach the short middle support bars ( E) to the top support bar connectors ( I) using the M6 x 15 mm combination bolts ( BB) .
Attach the short middle support bars ( E ) to the U shape clips 2 ( Q ) on the posts by using the M6 x 30 mm bolts ( CC) and nuts ( DD) .
Attaching the long middle support bars to the top support bar connectors
66
□
□
Attach the two long middle support bars ( F ) to the top support bar connectors ( I) using the M6 x 15 mm combination bolts ( BB) .
Attach the two long middle support bars ( F ) to the U shape clips 2 ( Q ) on the posts by using M6 x 30 mm bolts ( CC) and nuts ( DD) .
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
DD
CC