HAMPTON BAY TACOMA 5JGZ1285-WN User manual

USE AND CARE GUIDE
TACOMA 12 FT. DIAGONAL HEX PATIO PORTABLE GAZEBO
THANK YOU
Thank you for choosing Hampton Bay!
Model # 5JGZ1285-WN
continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Hex Gazebo.
1-855-HD-HAMPTON
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 7.00 p.m. EST, Monday - Friday,
9.00 a.m. - 6.00 p.m. EST, Saturday

WARNING:
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
The Fabric Will Burn If Left In Continuous Contact With Any Flame Source.
Always read and follow the instructions before use.
The gazebo is designed to provide shade only. Do not use this gazebo in strong wind and rain.
Wind and rain can damage the gazebo and could result in injury to you and others.
Always stake or weight down your gazebo at any time once set up.
This gazebo is NOT a permanent structure. Do not leave the gazebo unattended.
Do not permanently anchor unit to a wood deck or concrete surface.
□
□
□
Table of Contents
Safety Information
Table of Contents........................................................2
Safety Information.......................................................2
Warranty ......................................................................2
1 Year Frame and Fabric Limited Warranty................................2
Pre-Assembly .............................................................. 3
Planning Assembly .... .............................................................. 3
Hardware Included................................................................3
Package Contents .................................................................3
Assembly ..................................................................4
................................................................2
What Is Covered
What Is Not Covered ................................................................2..
.... ..
2
Warranty
1 YEAR FRAME / FABRIC LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
You may contact our customer service department with any questions by phone at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
We warrant the frame and the fabric to be free of manufacturing defects to the original purchaser for one year.
..........................................................
Care and Instrucitons
DANGER:
e on the roof of the gazebo.talmucca yam retaW
Take-down.................................................................9
10

3
Pre-Assembly
PLANNING ASSEMBLY
It will take a minimum of two persons about 20 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Anchor 12
BB
6
PACKAGE CONTENTS
AA BB
AB
D
Part Description Quantity
A Frame 1
B
1
Main canopy
C
1
Vent cover
Guy rope
C
D
6
Netting panel
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
6
ELeg cover
EF
6
FTie

4
Assembly
1 Setting up the frame
□Stand frame upright. Starting at the corners, with a partner
standing on the opposite side, grasp the two outer legs
slightly lift the frame off of the ground and step backwards
stopping at full arm’s length.
2Attaching the vent cover
□Unfold the main canopy and vent cover, place the vent cover (C)
over the center of the top of the frame. Gently pull the corner
pockets of the vent cover (C) on the 6 short roof tubes
in the center of the frame.
3Expanding the frame
□Each partner should then grasp the bottom rails of the middle
frame section (cross beam) where it forms a diamond. Lift frame
slightly off the ground and slowly walk backward until the frame
is extended to 80%.
WARNING:
as this may result in the bending of cross beams.
4
NOTE:
The canopy top and frame are shipped unattached to avoid
damage. First time set-up requires that the canopy be attached
to the frame. Once the canopy top is permanently attached,
set up and take down are easily accomplished within seconds.
IMPORTANT: Please do not use too much force during
set-up.
A
C
Grab Here
Attaching the main canopy
□Place the main canopy (B) over the top of the frame.
Use the hook and loop pads to secure each corner of the main cover (B)
to the frame at the top of each leg.
B

5
Assembly (continued)
5
□
6
7
Raising the legs
□
Lift two adjacent outer legs and pull out the inner legs gently until
the spring loaded snap button pops into position. Repeat this step
for the remaining legs. The gazebo offers three height levels.
To adjust, lift the leg up, carefully depress the snap button and
slowly pull out the inner leg until the snap button pops into the
next position, until the desired height level is reached. Repeat
on the other legs.
8
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
C
B
Extending the corner rib
Engage the slider at each corner by pushing up the slider with
one hand while holding down the top of the leg with the other
hand. Repeat this operation at remaining corners.
Rolling up the valance of the canopy
□Unpack the netting panels, locate the zipper end of each netting panel,
position the zippers in the midde of two legs. Place the netting panel
each leg.
Attaching netting panels
to the cross beams
on the outside of the frame at

9
6
Assembly (continued)
10 Securing the main canopy
②③
①
Attaching the netting panels to the legs using hook and loop straps
□Tuck the upper corner of the netting panel under each corner of the outside valance. Secure to the upper corner frame with
hook and loop straps.
□Secure each netting panel to one post leg with hook and loop straps (①, ②and ③)
□To secure the main canopy (B) to the frame, wrap the hook
and loop straps around the corner ribs and cross beams.
□Pull down the inside valances to cover the cross beams.
Secure the adjacent valances to each other for clean look.

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
11
12 Anchoring the gazebo
□
by driving one anchor (AA) through the hole on each foot base.
This will stabilize the frame in ideal weather conditons.
□Measure out from each leg to a proper distance and secure
one anchor (AA) to ground at 45 degree angle. Tie up one end
of each guy rope (BB) to triangular shaped rope holder located
on the outside corners of the canopy. Tie the other end of each
rope to the anchor (AA) on the ground. Adjust the guy ropes (BB)
so that they have the proper tension.
AA
AA
Adjust the position of each leg properly. Stake down the gazebo
BB
Suggested netting panels usage
□You may zip up the netting panels all the way around to keep insects out,
or leave one side unzipped to use as an entrance. By adjusting
the attachment location of the netting panels at the cross beams,
you may tie back netting panels with tiebacks for a drapery look.
Assembly (continued)

8
13
14 Anchoring the gazebo
□
Attaching leg covers
Assembly (continued)
Attach the leg covers (E) to the cross beams and corner post legs
with hook and loop straps (①,②,③) from outside corner.
Leg covers shall cover the netting panels from outside the frame.
③
②
①
E
(View from inside cor ner)
F
D
E
□
Wrap the leg covers and the netting panels around the post legs with the big ties (F) for a tidy look.

9
Take-down
1Removing leg covers and
netting panels
□Please reverse the leg cover and netting panel assembly
procedures to remove the leg covers and netting panels.
catching to the screen, please press firmly together the hook
& loop straps to form the loop right after undoing the straps
from tubes.
2
□With a partner, lift two adjacent outer legs slightly off the ground,
3
□With a partner on the opposite side, grasp the upper portion of
the middle of the cross beams and slightly lift up. Shake the
frame slightly and step towards your partner until the canopy
is 3/4 closed.
Please do not use force!
4
□Grasp the adjacent outer legs and push the unit together until
fully closed.
depress the push buttons (1) and telescope the inner legs up into
outer legs. Undo the hook & loop straps of the canopy from around
the corner ribs and cross beams. Failure to do so may results in the
tearing of the canopy during the take-down.
Lowering the gazebo
Closing the gazebo Folding the gazebo
□CRITICAL STEP TO AVOID FRAME DAMAGE!
Release sliders at all six corners by gently depressing the push
button (2) and pushing the sliders down a bit.
□Make sure the canopy is completely dry and then return
the folded pop up gazebo to the carry bag for storage.
IMPORTANT: Please do not use too much force during any
any part of take-down. Please remove guy ropes and anchors
before take-down.
1
2
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Grab here to close
Remember to keep the crotchets on hook & loop straps from

10
Care Instructions
Always return the gazebo to the carry bag after use. Be sure the gazebo is completely dry before storing it.
Treat the frame with liquid wax for maximum protection against UV light and salty, damp air.
Wash the canopy with a mild solution of soap and water, rinse thoroughly, air dry completely.
Do not use bleach or solvents.
WARNING:
Garden house/Gazebo’s are NOT permanent structures and are designed for sunshade and privacy only they must be used
under normal weather conditions. We recommend removal of the fabric canopy when expecting inclement weather conditions
(high wind, heavy rains, snow) as gazebos will catch wind similar to umbrellas. Failure to remove the fabric canopy or bring down
the unit during severe weather conditions could cause the gazebo to have structural damage or even structural collapse.