Hanover HBR016A5K1-WG User manual

Assembly Instruction for King Bed
PARTS INCLUDED:
KINGHEADBOARD , FOOTBOARD, RAILS, SLATS & SUPPORT LEGS
Caution:
Please read instructions thoroughly before unpacking assembly parts.
Sharp, exposed staple tips can cause injury, therefore, for your protection,
please remove any exposed staples used in packing.
1. We recommend that you should assemble this product with the assistance of another person; this will make
assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during
shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non - abrasive floor before assembly and follow the assembly step to assemble your newly
purchased product correctly and efficiently.
STEP 1
3
5 2
4 4x
STEP 2 E
A
E
D RIGHT
D
6
LEFT E
SUPPORT LEG MARKING A
(FRONT VIEW) E A
(BACK VIEW) 6
8x
STEP 3 A
STEP 4
B
B C
SLAT MARKING
A
PART LIST
NO
PART DESCRIPTION
CODE
QTY
A
KING/QUEEN RAIL
KQRAL
2
B
KING SLAT - IN HEADBOARD BOX
KBSLT
4
C
KING SLAT SUPPORT LEG - IN HEADBOARD BOX
KBSPL
8
D
KING HEADBOARD LSF / RSF LEG
HBLEG
2
E
KING HEADBOARD BOTTOM STRETCHER
KHSTR
1
NO.
HARDWARE LIST
QTY
1
M4 X 32mm
12
2
M6 x 30mm
6
3
M4 x 65mm
1
4
M6 x 13mm
6
5
M6 x 1/4"
6
6
M5 x 65mm
1
HARDWARE LOCATED IN HEADBOARD BOX
1

PART LIST
NO
PART DESCRIPTION
CODE
QTY
A
DRESSER TOP
DRTOP
1
B
DRESSER BACK PANEL
DRBPN
1
C
DRESSER TOP DRAWER
DRDRW1
2
D
DRESSER CENTER DRAWER
DRDRW2
2
E
DRESSER BOTTOM DRAWER
DRDRW3
2
F
MIRROR SUPPORT - PACK AT MIRROR
MRSLT
2
G
MIRROR BACK PANEL
MRBPN
1
H
DRAWER WOODEN HANDLE W/SCREW
CGHD
6
NO.
HARDWARE
LIST
QTY
1
M6 x 30mm
4
2
M6 x 40mm
4
3
M6 x 19mm
8
4
M6 x 1/4"
8
5
M4 x 65mm
1
HARDWARE LOCATED
IN MIRROR BOX
Assembly Instruction for Dresser w/ Mirror
Caution:
Please read instructions thoroughly before unpacking assembly parts.
Sharp, exposed staple tips can cause injury, therefore, for your protection,
please remove any exposed staples used in packing.
1. We recommend that you assemble this product with the assistance of another person; this will make assembly
easier, and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during
shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non - abrasive floor before assembly and follow the assembly step to assemble your newly
purchased product correctly and efficiently.

Assembly Instruction for Chest
Caution:
Please read instructions thoroughly before unpacking assembly parts.
Sharp, exposed staple tips can cause injury, therefore, for your protection,
please remove any exposed staples used in packing.
1.
We recommend that you assemble this product with the assistance of another person; this will make
assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during
shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non - abrasive floor before assembly and follow the assembly step to assemble your newly
purchased product correctly and efficiently.
PART LIST
NO
PART DESCRIPTION CODE QTY
A
CHEST TOP CHTOP 1
B
CHEST BACK PANEL CHBPN 1
C
CHEST TOP DRAWER CHDRW1 1
D
CHEST CENTER DRAWER CHDRW2 3
E
CHEST BOTTOM DRAWER CHDRW3 1
F
DRAWER WOODENHANDLE W/SCREW CGHD 5
CA
DAnti - Tip Kit
D
D
E
F B
NOTE:
Please note that thesafety
bracket set and instructions is
attached in the right top drawer

Assembly Instruction for Night Stand
Caution:
Please read instructions thoroughly before unpacking assembly parts.
Sharp, exposed staple tips can cause injury, therefore, for your protection,
please remove any exposed staples used in packing.
1.
We recommend that you assemble this product with the assistance of another person; this will make
assembly easier, and will help to eliminate damage to the product or injury to persons during assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during
shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly and follow the assembly step to assemble your newly
purchased product correctly and efficiently.
PART LIST
NO
PART DESCRIPTION
CODE
QTY
A
NIGHT STAND TOP
NSTOP
1
B
NIGHT STAND BACK PANEL
NSBPN
1
C
NIGHT STAND TOP DRAWER
NSDRW1
1
D
NIGHT STAND BOTTOM DRAWER
NSDRW2
1
E
DRAWER WOODEN HANDLE W/SCREW
CGHD
2
C A
D
E
B