Hanover Riley RLYDN7PC-GRY User manual

Page 1of 4

Page 4of 4

Page 2of 4
ASSEMBLY INSTRUCTIONS
GLA-62072-10KD - Dining Chairs
Please read through these instructions before beginning assembly.
- Clear out the space for assembly and lay out all parts based on parts list. Extra room will allow you to
easily determine if all the pieces are present.
- Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
- Keep small parts and pieces away from children until fully assembled.
- Do not fully tighten the screws until all have been inserted and hand tightened.
- Check for any loose screws and tighten them before use.
- Do not stand or jump on the chair as it may cause injury.
- Weight limit of chair: 250lbs

Page 3of 4
PARTS LIST
A
Seatback
2 pcs
E
Bolt M6x35mm
6 pcs
B
Seat Panel with
Legs
2 pcs
F
Washer
6 pcs
C
Hex Key
1 pc
G
Back Cushion
2 pcs
D
Bolt Cover
6 pcs
H
Seat Cushion
2 pcs
STEP-BY-STEP ASSEMBLY
STEP 1
STEP 2
Repeat the steps for second chair.

Page 2of 4
ASSEMBLY INSTRUCTIONS
GLAQ-35632-3831KD - Dining Table
Please read through these instructions before beginning assembly.
- Clear out the space for assembly and lay out all parts based on parts list. Extra room will allow you to
easily determine if all the pieces are present.
- Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
- Keep small parts and pieces away from children until fully assembled.
- Do not fully tighten the screws until all have been inserted and hand tightened.
- Check for any loose screws and tighten them before use.
- Do not sit or stand on the table as it may cause injury.
- To completely stabilize umbrella (not included), an umbrella base must always be used. Table cannot
independently support an umbrella.

Page 3of 4
PARTS LIST
A
Table Top
1 pc
D
Bolt Cover
16 pcs
B
Table Leg
4 pcs
E
Bolt M6x20mm
16 pcs
C
Hex Key
1 pc
F
Washer
16 pcs
ASSEMBLY DIAGRAM