
4
D Technische Daten
Betriebsdruck: max. 0,6 MPa
Empfohlener Betriebsdruck: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Heißwassertemperatur: max. 60°C
Hansgrohe Brausen können in Verbindung mit hydraulisch
und thermisch gesteuerten Durchlauferhitzern eingesetzt
werden, wenn der Fließdruck vor der Armatur mindestens
0,15 MPa beträgt.
F Informations techniques
Pression de service autorisée: max. 0,6 MPa
Pression de service conseillée: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Température max. d’eau chaude: max. 60°C
Les douchettes de Hansgrohe peuvent être utilisées en
liaison avec des chaue-eau hydrauliques et à commande
thermique, lorsque la pression présente en amont de la
robinetterie est d’au moins 0,15 MPa
GB Technical Data
Operating pressure: max. 0,6 MPa
Recommended operating pressure: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Hansgrohe showers can be used together with hydraulically
and thermically controlled continuous ow heaters if the ow
pressure is at least 0,15 MPa before the shower tting.
I Dati tecnici
Pressione d’uso: max. 0,6 MPa
Pressione d’uso consigliata: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Temperatura dell’acqua calda: max. 60°C
Le doccette Hansgrohe possono essere utilizzate in funzione
di scaldabagni idraulici e termici, se la pressione di usso
davanti alla rubinetteria è di almeno 0,15 MPa.
E Datos técnicos
Presión en servicio: max. 0,6 MPa
Presión recomendada en servicio: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Temperatura del agua caliente: max. 60°C
Las duchas mural de Hansgrohe se pueden utilizar en
combinación con calentadores instantáneos con control
hidráulico o térmico siempre que la presión dinámica del
agua supere los 0,15 MPa.
NL Technische gegevens
Werkdruk: max. max. 0,6 MPa
Aanbevolen werkdruk: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Temperatuur warm water: max. 60°C
Hansgrohe hoofddouches kunnen worden gebruikt in
combinatie met hydraulisch en thermisch gestuurde geisers
wanneer de druk voor de armatuur minimum 0,15 MPa
bedraagt.
DK Tekniske data
Driftstryk: max. 0,6 MPa
Anbefalet driftstryk: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Varmtvandstemperatur: max. 60°C
Hansgrohe brusere kan anvendes i forbindelse med hy-
draulisk og termisk styrede gennemstrømningsvandvarmere,
hvis trykket er på min. 0,15 MPa.
P Dados Técnicos
Pressão de funcionamento: max. 0,6 MPa
Pressão de func. recomendada: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Temperatura da água quente: max. 60°C
Os chuveiros Hansgrohe podem ser utilizados com esquen-
tadores controlados quer hidráulica quer termicamente
desde que a pressão seja no mínimo de 0,15 MPa.
PL Dane techniczne
Ciśnienie robocze: maks. 0,6 MPa
Zalecane ciśnienie robocze: 0,15 – 0,4 MPa
(1 MPa = 10 bary = 147 PSI)
Temperatura wody gorącej: maks. 60°C
Prysznice Hansgrohe mogą być stosowane w połączeniu
z przepływowymi podgrzewaczami wody sterowanymi
hydraulicznie lub termicznie w przypadku, gdy ciśnienie
przepływu przed armaturą wynosi co najmniej 0,15
MPa.
CZ Technické údaje
Provozní tlak: max. 0,6 MPa
Doporučený provozní tlak: 0,15 – 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Teplota horké vody: max. 60°C
Sprchy Hansgrohe je možné používat s hydraulicky a
tepelně řízenými průtokovými ohřívači, pokud je tlak před
armaturou alespoň 0,15 MPa.