Hasbro Tiger Electronics BattleBots User manual

BattleBots combines science, sports, and scrap metal into the
coolest competition ever! Does your BattleBot have what it takes
to overcome all challengers in no-holds-barred robot combat? It's
time to kick some Bot and find out!
To get the most enjoyment from your BattleBot, we recommend
you read these instructions fully.
I. WELCOME TO BATTLEBOTS!
II. INSERTING THE BATTERIES
III. ASSEMBLING THE ARENA
Your BattleBots come with an arena that you
can assemble. You will need a smooth,
flat surface (such as countertop or glass
surface) where the suction cups will stick
down. Assemble the arena walls as shown
below.
You don't have to limit yourself to just the included arena! You can
use just about anything to make an arena for your BattleBots -
books, boards, bricks, whatever you like.
IV. HOW TO HAVE A BATTLEBOTS MATCH
Make sure your protective body shell is
firmly attached.
Each player should turn his Bot on.
Now stand back and
watch the action!
Hair entanglement may result if child's hair
comes in contact with moving parts of toy.
Adult supervision is required.
CAUTION:
Once your Bot is turned on, hold it above the arena and wait for
your opponent. On the count of three, both players should quickly
place their Bots inside the arena.
Using a Philips® screwdriver, loosen the screw
from the battery compartment door located on
the bottom of the Bot. Remove the battery
compartment door.
Insert 2 x AAA/LR03 batteries making
sure to align the “+” and “-” as shown
inside the battery
compartment.
Replace battery compartment
door and screw into place, then
replace the Bot outer body shell.
CAUTION: Batteries should be replaced by an adult.
Not suitable for children under 36 months, may
contain small parts.
To ensure proper function :
• Battery installation should be done by
an adult.
• Non-rechargeable batteries are not to
be recharged.
• Rechargeable batteries are to be
removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be
charged under adult supervision (if removable).
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short- circuited.
• Do not mix old and new batteries.
• Do not mix alkaline, standard or rechargeable batteries.
DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY
EXPLODE OR LEAK.
ONOFF

VI. FIGHT HARD, BUT FIGHT FAIR!
If your Bot gets caught on the side of the arena and can't move,
don't touch! If your opponent's Bot is still moving, you have to
give it a chance to kick your Bot!
If BOTH Bots get caught on the side of the arena and can't move,
both players should pick up their Bot and move them back to their
starting positions. Let go and resume the combat!
VII. WARRANTY
Tiger Electronics (Tiger) warrants to the original consumer
purchaser of this product that the product will be free from defects
in materials or workmanship for 90 days from the date of original
purchase. This warranty does not cover damages resulting from
accident, negligence, improper service or use or other causes not
arising out of defects in materials or workmanship.
During this 90-day warranty period, the product will either be
repaired or replaced (at Tiger’s option) without charge to the
purchaser, when returned with proof of the date of purchase to
either the dealer or to Tiger.
Product returned to Tiger without proof of the date of purchase
or after the 90-day warranty period has expired, but prior to one
year from the original date of purchase, will be repaired or replaced
(at Tiger’s option) for a service fee of U.S.$9.00. Payments must
be by check or money order payable to Tiger Electronics.
The foregoing states the purchaser’s sole and exclusive remedy
for any breach of warranty with respect to the product.
All product returned must be shipped prepaid and insured for loss
or damage to:
Tiger Repair Department
1000 N. Butterfield Road, Unit 1023
Vernon Hills, IL 60061 USA
®, TM, & ©2001 Tiger Electronics.
All rights reserved.
980 Woodlands Parkway
Vernon Hills, IL 60061 USA
www.tigertoys.com
A division of Hasbro, Inc.
WhereTechnology Comes to Play! ™™
Printed in China
®, TM, & © 2001 Tiger Electronics,
a division of Hasbro, Inc. All Rights Reserved.
Belvedere House,Victoria Avenue, Harrogate,
North Yorkshire HG1 1EL, United Kingdom.
www.tigertoys.co.uk
All Rights Reserved
Copyright 2001 BattleBots, Inc.
701 DeLong Ave., Unit K
Novato, CA 94945
www.battlebots.com
V. IMPACT SENSORS
Each Bot is equipped with impact sensors. If this impact sensor
is struck a solid blow, your Bot may be disabled! The protective
body shell of your Bot will pop off and your Bot will stop working.
This is a good hit!
If your Bot strikes the impact sensor of the
opponent and disables his Bot, YOU WIN!
Danger zone
Danger zone
The product should be carefully packed in the original box or other
packing materials sufficient to avoid damage during shipment.
Include a complete written description of the defect, a check if
product is beyond the 90-day warranty period, and your printed
name, address and telephone number.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND
NO OTHER REPRESENTATIONS OR CLAIMS OF ANY NATURE
SHALL BE BINDING ON OR OBLIGATE TIGER IN ANY WAY. ANY
IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE NINETY (90)
DAY PERIOD DESCRIBED ABOVE. IN NO EVENT WILL TIGER BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM POSSESSION, USE, OR
MALFUNCTION OF THIS TIGER PRODUCT.
Some states do not allow limitations as to how long an implied
warranty lasts and/or exclusions or limitations of incidental or
consequential damages, so the above limitations and/or exclusions
of liability may not apply to you. This warranty gives you specific
rights, and you may also have other rights which vary from state
to state.
For more information about Tiger Electronics, our products and
special promotions, please visit our Web Site at:
www.tigertoys.com
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
4. Consult the dealer or an experienced radio TV technician for
help.