User Manual Version 3.1 7
Table of Figures
Figure 1:HJ930 Overview frontside.......................................................................... 15
Figure 2: HJ930 Overview rear side..........................................................................16
Figure 3: Mounting the guides..................................................................................17
Figure 4: The operator panel....................................................................................19
Figure 5: Main display............................................................................................. 22
Figure 6: Inserting the ink cartridge into the pen stall .................................................27
Figure 7: Lock the restraining lever........................................................................... 27
Figure 8: Adjusting the separation............................................................................28
Figure 9: Unused separation fingers.......................................................................... 29
Figure 10: Transport roller height.............................................................................29
Figure 11: Turned side guide for a narrow medium .....................................................30
Figure 12: Position of the slide.................................................................................31
Figure 13: Adjusting the printer to the material thickness ............................................ 32
Figure 14: Positioning the vertical print area .............................................................. 33
Figure 15: Unprintable area.....................................................................................33
Figure 16: Printing flush to the top edge of a material .................................................34
Figure 17: Print area on C5 envelope ........................................................................34
Figure 18: Print position on C4 not possible with NOR setting ....................................... 35
Figure 19: Print position on C4 possible with REV setting .............................................35
Figure 20: Testprint................................................................................................37
Figure 21: Keep Alive function..................................................................................47
Figure 22: PRINT CORR.PATT...................................................................................48
Figure 23: ADJUST TOF test print .............................................................................50
Figure 24: Difference Nor/Rev.................................................................................. 59
Figure 25:LEFT MARGIN, transport direction............................................................... 60
Figure 26: Encoder Pattern...................................................................................... 71
Figure 27: Pattern A ............................................................................................... 72
Figure 28: Pattern A with defects.............................................................................. 72
Figure 29: Cartridge contacts................................................................................... 73
Figure 30: Pattern B ............................................................................................... 73
Figure 31: Pattern C ............................................................................................... 73
Figure 32: Sample character set print ....................................................................... 74
Figure 33: Sample setting dump print .......................................................................75
Figure 34: Sample Input Buffer Dump print................................................................76
Figure 35: New Hardware Wizard .............................................................................80
