Hatco FLAV-R-SAVOR LFST-48 Owner's manual

January 2007 Part number 07.04.408.00
SUPPLEMENTAL INSTRUCTIONS FOR LFST-48
SPECIFICATIONS:
Model Voltage Watts Amps Plug Configuration
LFST-48 120/208-240 2150 14.6 NEMA L 14-20P
DIMENSIONS: Width: 48 7/8"(1241 mm), Depth: 27 1/8"(689 mm), Height: 30"(762 mm)
(Note: Dimensions include sign holders.)
MODEL DESCRIPTION:
The LFST-48 is a large capacity dry cabinet for displaying food product at proper serving
temperatures. This allows for food to be prepared in advance of peak serving periods, while placing
product in full-view to increase impulse sales.
Features include:
•Four French-style self-closing glass doors
•Display rack with three slanted shelves
•Tempered glass sides
•Incandescent lights to illuminate holding area
•Sign holders on all four sides
•Electronic Temperature Control
•6'(1829 mm) cord and plug set attached
OPERATION:
1. Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration.
2. Position On/Off rocker switch in the ON position. Allow 20-30 minutes to reach operating temperature.
NOTE: Unit is equipped with an electronic temperature controller.
To adjust or set the temperature, place the red mode switch control knob at the SP-1 position
indicated on the controller.
Adjust the setpoint screw to the desired temperature. (Maximum setting is 220°F).
Turn the red mode switch control knob to the “TEMP” position to complete the programming.
CLEANING:
NOTE: Use only non-abrasive cleaners. Abrasive cleaners can scratch the finish of your unit marring
its appearance.
Clean daily with a soft, damp cloth.
Wipe off sign holder inserts using a soft, clean and damp cloth. Do not use glass cleaner. Glass
cleaner may scratch the polycarbonate surface.
HATCO CORPORATION
P.O. Box 340500, Milwaukee, WI 53234-0500 U.S.A.
[phone] [phone]
Parts & Service Fax [phone] Int’l. Fax [phone]
www.hatcocorp.com