Havahart Radial-Shape Select User manual

Havahart® Wireless
Woodstream Corporation
69 North Locust Street
Lititz, PA 17543 | 1-800-800-1819, Option 453
www.HavahartWireless.com
Instruction Manual
REV 02-15
DO NOT RETURN THIS PRODUCT
TO THE STORE FOR ANY REASON.
CONTACT HAVAHART®WIRELESS DIRECTLY!
CALL 1-800-800-1819, OPTION 453.
1440601
Covered by 1 or more of U.S. Patents
8,297,233, 8,701,600, 8,726,845 and 1
or more U.S. Patents Pending.

Controller
Fence Radius
2
Table of Contents
Table of Contents
IMPORTANT SAFETY REMINDERS ...............................................................................................................................
SYSTEM COMPONENTS ................................................................................................................................................
KEY DEFINITIONS, TECHNOLOGY & HOW IT WORKS ............................................................................................
- Roaming Area
- Trigger Zone
- Controller
- Havahart®Wireless Collar
GETTING STARTED ...........................................................................................................................................................
- Planning Your Wireless Fence Boundary
- Quick Checklist
FACTORS AFFECTING SIGNAL STRENGTH ..................................................................................................................
INSTALLING THE RADIAL-SHAPE SELECT HAVAHART®WIRELESS DOG FENCE ...............................................
Setting Up the Controller ...........................................................................................................................
- Installing & Activating the Controller
Setting Up the Collar ....................................................................................................................................
- Installing a Battery
- Recharging a Battery
- Activating a Collar
- Adjusting the Correction Level of a Collar
- Turning a Collar Off/On
- Removing a Collar
- Checking Battery Status
Setting Up the Fence Boundary/Trigger Zone ...................................................................................
- Establishing the Fence Boundary/Trigger Zone Distance
- Placing Training Flags
- Turning the Trigger Zone Off/On
- Display Options
(Viewing Distance to Dog and Battery Status, Turning the Display Off/On, Setting Alarm Options)
Fitting a Collar ................................................................................................................................................
TRAINING YOUR DOG ......................................................................................................................................................
TROUBLESHOOTING .......................................................................................................................................................
TERMS OF USE AND LIMITATION OF LIABILITY .........................................................................................................
WARRANTY INFORMATION ..........................................................................................................................................
1
2
3
4
Welcome
www.HavahartWireless.com 1-800-800-1819, Option 453
3
4
5
7
NOTE: To ensure your complete
satisfaction and your dog’s safety, please
read and follow all of these instructions
carefully. Should you need assistance, our
Consumer Care Specialists are ready to
help. Call 1-800-800-1819, Option 453.
Register Your Havahart®Wireless
Fence at www.HavahartWireless.com/
customerservice/product-registration
to ACTIVATE YOUR WARRANTY.
Thank you for purchasing the
Radial-Shape Select Wireless Dog Fence
from Havahart®Wireless!
IMPORTANT MESSAGE
Proper training of your dog is the most critical element to ensure the successful operation of
your Wireless Dog Fence. Consult the training section of this manual once you have set up your
Wireless Dog Fence.
AVERAGE SYSTEM SETUP TIME IS 1 HOUR
1
Congratulations and thank you for choosing the Radial-Shape Select Wireless Dog Fence
from Havahart®Wireless- the leading innovator of digital wireless fence solutions.
Featuring breakthrough technology, the Radial-Shape Select Wireless Dog Fence is designed to
provide maximum freedom and safety for your dog and peace of mind for you with minimal effort,
investment and impact on your property. It is the industry’s most-advanced, circular Wireless Dog
Containment System that offers a Roaming Area that can extend from a 40-ft to a 400-ft radius with
the touch of a button. This is the largest containment area of any Wireless Fence.
The Radial-Shape Select Wireless Fencing Technology improves digital communication through
precision tuning between the system Controller and the Collar. The Collar includes a Battery Cap
design that is flush with the Battery Housing, providing a more secure fit. The Strap is made of heavy-
gauge nylon webbing with a snap buckle closure. The Collar size is 14” to 26”. For our small dog
Radial-Shape Select owners, the Collar size is 12” to 17” with a Collar Battery Housing the same size as
the average dog version.
There are no wires to bury and no digging required- just a fast and easy-set up that creates
even more freedom for your dog to roam!
!
8
9
9
11
14
17
19
26
29
30

To ensure the safe and effective operation of your Radial-Shape Select Wireless Dog Fence, please read and follow all
safety guidelines and instructions:
•The Radial-Shape Select Wireless Dog Fence is designed for dogs older than 6 months that weigh more
than 8 pounds.
•The Controller must be installed indoors and should not be exposed to moisture.
• The Controller must be plugged into a properly grounded 120V AC outlet.
• Changes or modifications to any system component may cause permanent system damage and void
manufacturer warranties.
• To prevent system damage due to unexpected power surges, it is recommended that you unplug the
Controller from the wall outlet during thunderstorms. All settings will be retained in system memory.
Also do not attempt to install the system during stormy weather.
• To help prevent skin irritation and increase Battery life, it is vet-recommended that you do not leave the
Collar on your dog for more than 12 consecutive hours.
• Always remove the Collar from your dog before adjusting any of the system components or settings.
• The system is intended to provide safe containment of your dog. All components should be kept out of
the reach of children.
• Follow your established leash laws. There may be cases where this system will be prohibited by law.
• Proper training of your dog is the most critical element to ensure the safe and successful operation
of your Wireless Dog Fence.
Controller
AC Adapter Power Cord
Removable Wall-Mount Adhesive Strips
Screws & Wall Anchors
Collar
2 RCR123 Batteries For Collar & Battery Charger
Other Items You May Need:
•Scissors
•Tape Measure
•Screw Driver
Heart-Shaped Collar Tester
Extra Set Of Collar Probes For Short-Haired Dogs
75 Training Flags
Instructional DVD
Instruction Manual
Quick Setup Guide
System ComponentsImportant Safety Reminders
System Components
Important Safety Reminders
3 4
A
A
H
B
I
C
D
E
F
G
B
C
D
E
F
H
I
www.HavahartWireless.com
DO NOT RETURN THIS PRODUCT
TO THE STORE FOR ANY REASON
CONTACT HAVAHART®WIRELESS DIRECTLY!
CALL 1-800-800-1819, OPTION 453.
1-800-800-1819, Option 453
Ensure that the following components are
included with your system. If a component is
missing, please call 1-800-800-1819, Option 453.
G
•Permanent Marker
•Isopropyl Rubbing Alcohol
•Soft Cloth
J

Controller
Fence Radius
Antennas
LCD Screen
Power Button
Embedded Antennas
Collar Light
Battery Housing
Battery Cap
Probes
Washers
Up, Enter & Down Buttons
AC Power Connection
Key Definitions:
Roaming Area: Area between the Controller and the Trigger Zone where your dog is free to roam and play. Capable of
expanding the fence radius from 40 feet up to 400 feet.
Trigger Zone: The zone, which may be 3 to 6 feet wide, is located at the
edge of the Roaming Area. The Collar will correct at a point within this Zone.
These points strung together create your Fence Boundary. Correction is
triggered by your dog crossing into the Trigger Zone and can be set to
Tone-Only (auditory alarm) or Static correction. The speed at which your
dog crosses into the Trigger Zone will influence where the correction
is delivered.
Controller: Auditory alerts and the LCD screen provide intuitive navigation for setting up,
activating and managing your Fence. The Controller houses a
state-of-the-art transceiver and displays the real-time distance
to your dog. It will notify you if your dog breaches the
Fence Boundary, or if the Battery life of the Collar
is running low. The Controller can manage up
to 2 Collars.
Havahart® Wireless Collar: The Collar
houses a rechargeable RCR123 Battery, two
correction Probes and a state-of-the-
art radio transceiver with advanced
antenna assembly. The Collar
communicates continuously with the
Controller to track the location of your
dog. The Collar can be programmed to
Tone-Only (auditory correction) or one of 5
different Static correction levels. The default
correction level is Tone-Only. Use Long or Short
Probes depending upon the thickness of your dog’s
coat. The Havahart®Wireless Collar features Motion
Sensor Technology, which allows the Collar to go to sleep
when it is not in motion to conserve Battery life.
The Technology Behind the System:
The Radial-Shape Select Havahart®Wireless Dog Fence is driven by two nanoLOC TRX 2.4 GHz transceivers that have been enhanced
with complex algorithms, strategic distortion filtering and modular signal amplification to deliver time-of-flight ranging technology.
These enhancements allow the Radial-Shape Select Havahart®Wireless Dog Fence to provide an unparalleled level of technical
sophistication in the Wireless Dog Fencing industry.
How it Works:
Both the Havahart® Wireless Collar and the Controller contain nanoLOC TRX 2.4 GHz transceiver chipsets that send and receive
radio transmissions from their associated antenna pairs like 2-way radios. When radio signals are sent from the antennas of either
component, they propagate in an omni-directional or spherical manner. The ranging process continuously captures, filters and
refines data that yields the distance between the Havahart®Wireless Collar and the Controller.
This enables the system to track the location of your dog. When the user-defined Fence radius distance is reached
inside the Trigger Zone, the Controller sends a command to the Collar to take action and correct (tone or static — based on
user settings). The correction is not constant, but cyclical. The Collar will correct your dog until one of the following two
conditions is met:
1. Your dog returns back into the Roaming Area. The System then returns to normal operating mode.
2. The Collar’s Safety Time-Out Feature stops the correction cycle after 30 seconds. After the correction cycle times out, your
dog will NOT be corrected for returning to the Roaming Area. The Collar will revert to normal operating mode only
when your dog is back inside the Roaming Area. After that, the Controller will not send another correction command until
your dog moves back into the Trigger Zone.
Key Definitions, Technology & How it Works
Key Definitions, Technology & How it Works
5
Key Definitions, Technology & How it Works
6
www.HavahartWireless.com
A
A
B
B
C
C
D
D
E
E
D
E
F
A
B
C
Controller Features: Collar Features:
1-800-800-1819, Option 453
BC
E
F
D
AA
R
O
AMING ARE
A
Recorded FenceBoundar y
CORRECTION ANYWHERE IN THIS
6’ TRIGGER ZONE IS ACCEPTABLE
+/- 3’
+/- 3’
Key Definitions, Technology & How it Works

Getting Started
Getting Started
7www.HavahartWireless.com
The most important step in setting up your Radial-Shape Select Havahart®Wireless
Dog Fence is determining the proper location to mount the Controller. Choose a
location inside the home on an exterior wall nearest the center of the desired circular
containment area (see Factors Affecting Signal Strength on Page 8).
The following are sample layouts for your reference:
Factors Affecting Signal Strength
R
O
AMING AREA
Trigger Zone
Trigger Zone
Controller
20’
RO
AMING ARE
A
Trigger Zone
Trigger Zone
Controller
ROAMING AREA
ROAMING AREA
Trigger Zone
Trigger Zone
Controller
R
O
AMING ARE
A
Trigger Zone
Trigger Zone
Controller
20’
Dog has full access to house and yard within the
Roaming Area. Controller on exterior wall.
Roaming Area contains part of neighbor’s property and
extends onto the road. Consequences could be severe.
Controller on inner wall.
Dog has limited access to house and yard within Roaming
Area. Collar should be removed upon entering house,
otherwise your dog will be corrected inside the home.
Controller on inner wall.
Dog has full access to house and yard within the
Roaming Area. Controller on exterior wall.
Good Good
May Cause Problems May Cause Problems
1-800-800-1819, Option 453
Your Fence Boundary/ Trigger Zone should
NOT be closer than 20 feet to ANY ROAD,
SIDEWALK OR THOROUGHFARE FOR
YOUR DOG’S SAFETY.
!
IMPORTANT MESSAGE
Before you begin the installation process, be sure to check the following:
•Make sure that you have all system components ready and available.
•Insert a fully charged Battery into the Collar.
•Commit to properly training your dog.
QUICK CHECKLIST
Flag Calculator: You should have 1 flag for every foot of your fence radius distance. If you have a 90 foot
radius, you will need 90 flags to enclose your Roaming Area.
Planning Your Wireless Fence Boundary:
Factors Affecting Signal Strength
8
Various objects can interfere with the signal strength of your Wireless Fence. This can result in
a gradual loss in the measured distance of the radio signal from the Controller to the Trigger
Zone. The part of the Trigger Zone that is obstructed by an object may dip or bow inward
toward the Controller or create a criss-cross. The resulting shape of the Trigger Zone may be
slightly different than a perfect circle and the Roaming Area may be slightly reduced. When
this happens, the object between the Controller and the set Trigger Zone is said to attenuate
the radio signal or the Trigger Zone.
Obstacles that can slightly obstruct any wireless signal include: mirrors, microwaves, home appliances, electric power meters, air
conditioning units, metal screened porches, metal downspouts, trees, large bushes, above-ground pools, sheds and sloping hills.
Objects that will cause considerable obstruction are aluminum siding, densely wooded lots and heavily landscaped properties.
The closer an obstructing object is to the Trigger Zone
or the closer a metallic object (such as a mirror) is to the
Controller, the greater the interfering effect it can have on
the Trigger Zone. Likewise, the more dense an obstructing
object is, the more severe the dip or shaping effect of the
Trigger Zone.
It can be very difficult to predict the exact amount of interference different objects can cause and how the Trigger Zone and Roaming
Area will be affected.
Despite all of the measures Havahart®Wireless has taken to boost the signal strength of the Controller, attenuation is difficult to totally
prevent for any Wireless Fence System. Similar to the way buildings attenuate cell phone reception, your home will likely attenuate your
dog’s Roaming Area. In most cases the resulting dipping should be a minor issue that may not even be noticed.
In the event that your System experiences severe interference or attenuation with which you are not comfortable, there are a few
things that you can try to counter or lessen the effects:
•Place the Controller above or at least 3 feet away from appliances and other large metal objects like mirrors inside the home.
Also make sure there are no obstructing objects, such as an electric power meter, near or immediately outside the wall
where your Controller is placed. The fewer the number of objects that the Controller’s signal has to go through to reach the
outside, the better.
•It may be necessary to choose a different location within the home for the Controller. Raise the Controller to 6 ft off the
ground, or to a higher floor of the home.
•Expand the Fence Boundary by increasing the Fence radius on the Controller.
Should you need additional help to minimize wireless signal interference for your Havahart®Wireless Dog Fence,
please call 1-800-800-1819, Option 453.
ROAMING AREA

9 10
Setting Up the Controller Setting Up the Controller
www.HavahartWireless.com 1-800-800-1819, Option 453
To attach using the removable wall-mount adhesive strips:
•Once the Controller location is determined, gently clean the
wall surface with isopropyl rubbing alcohol, wipe gently and
let dry. DO NOT USE household cleaners (see Figure 1.0).
•Separate adhesive strips (if still connected) at the perforation.
•Peel the liner from the back of one of the strips and attach it
vertically to the middle of the Controller with the release-tab
pointed upward toward the antennas (see Figure 1.1a).
•Connect another strip to the strip on the Controller by
pressing the fasteners of both strips firmly together until
they snap. The release-tab on the other strip should point
downward away from the antennas - the opposite direction
of the release-tab of the strip on the Controller (see Figure 1.1b).
•Peel the liner from the back of the second strip and attach it
to the wall with the release-tab facing downward toward the
floor and the Controller antennas facing upward toward the
ceiling (see Figure 1.2).
To remove the adhesive strips:
•Pull the Controller gently from the wall by disconnecting
the fasteners. DO NOT pull the strips off the Controller or
the wall.
•Start with the strip on the wall. Press one hand on the top of
the strip. Use your other hand to pull the release-tab slowly
down against the wall stretching it at least 12 inches until
the strip releases. Repeat for the strip attached to the
Controller (see Figures 1.3a & 1.3b).
Figure 1.0
Figure 1.1a
Figure 1.2
Figure 1.3a
NOTE: The removable wall-mount adhesive strips are not
recommended for wallpaper. Apply to surfaces above 50˚F .
Adhesive could soften and lose adhesion above 105˚F.
Figure 1.1b
Figure 1.3b
Installing the Radial-Shape Select Havahart®Wireless Dog Fence
Fence Radius
1
Setting Up the Controller
Installing & Activating the Controller:
1. Position the Controller inside your home on an exterior wall
nearest the center of your desired containment area. Make
sure a standard 120V AC power outlet not operated by a light
switch is nearby.
3. Plug the Controller into a nearby standard electrical outlet not
operated by a light switch.
NOTE: It is recommended to use the removable wall mount
adhesive strips in the event that you later determine the
Controller is not in the correct place and it needs to be
relocated. If the strips will not work on the wall of your
choice and you want to get a rough idea of where the Fence
Boundary/Trigger Zone will exist before you attach the
Controller to the wall, prop the Controller upright and as
close to the desired final position as possible.
Position the Controller at least 3 feet
away from large metal objects and major
appliances, as these items may reduce the
size and affect the shape of your Roaming
Area (see Factors Affecting Signal Strength
on Page 8).
!
IMPORTANT MESSAGE
Illustration A
NOTE: When the unit is first activated, you may receive a
“POWER FAILURE DETECTED!!!” warning. Disregard this
message and Press ENTER.
8
2. Using the removable wall-mount adhesive strips (see Page 10)
or screw & wall anchor, mount the Controller on the
appropriate wall, approximately 6 feet off the ground or at
eye level (see Illustration A).
4. Press “Enter.”
Installing the Radial-Shape Select Havahart®Wireless Dog Fence

11 12
Setting Up the Collar Setting Up the Collar
www.HavahartWireless.com 1-800-800-1819, Option 453
Screen 1.0
Screen 1.2
Screen 1.1
The correction level of the Collar may be
adjusted using the Controller. There are 5
Static correction levels and one Tone-
Only level (sound only). During setup,
use Tone-Only, the default correction
level of the Collar is Tone-Only.
It is recommended to start with a lower
correction level when training your dog.
You may need to gently move or shake
the Collar to keep it awake so that it will
accept changes from the Controller. The
Collar light will flash green to confirm
that it is awake.
!
IMPORTANT MESSAGE
NOTE : If using more than one Collar, mark each Collar
using a permanent marker to indicate which is Collar 1 and
which is Collar 2.
Activating a Collar:
1. On the Controller...
• Select Setup Menu (see Screen 1.0).
• Select Collar Setup (see Screen 1.1).
• Select Add a Collar (see Screen 1.2). “Searching for new
Collars... ” will appear on screen.
• Gently shake the Collar to keep it awake. The
Collar light will flash green to confirm that it is awake.
• “New Collar Found! Collar ID=2” will appear on screen.
• Press Enter.
2. If no Collar is found, check that the above steps were
completed, the Battery is correctly installed and the Collar is
active (Collar light is flashing green). Then repeat Step 1
again. If still no Collar is found, try to Delete a Collar (see
Removing a Collar on Page 13). Then repeat Step 1 again.
Adjusting the Correction Level of a Collar:
On the Controller...
• Select Setup Menu (see Screen 1.0).
• Select Collar Setup (see Screen 1.1).
• Select Correction Level (see Screen 1.2). If you have more than
one Collar installed, select the number of the Collar that
you would like to change.
• Select Correction Level (see Screen 1.3).
• Use the up or down arrow keys to choose the desired
correction level. 5 is the highest Static correction level. 1 is
the lowest Static correction level. Tone-Only is the auditory
(sound only) correction level (see Screen 1.4). Use Tone-
Only for setup.
• Press Enter.
• Select OK.
Screen 1.3
NOTE: The Collar (Collar ID=1) has already been added to the
Controller and set to Tone-Only. You may skip Activating a
Collar & Adjusting the Correction Level of a Collar unless you
need to add another Collar.
Setting Up the Collar
2
Installing a Battery:
1. Make sure a Battery is fully charged before installing it into the
Collar. Turn the Battery Cap on the Collar counterclockwise to
the “unlock” icon, about 1/4 turn, and pull it out. With the positive
side facing outward, install one RCR123 Battery into the Collar (see
Figure 1.4). Replace the Battery Cap and turn it clockwise to the
“lock” icon to lock into place.
2. The Collar light will flash green. If it does not, shake the Collar
gently as the Collar is in sleep mode (see the Havahart®Wireless
Collar light chart).
NOTE : The Collar is always “on” when a fully charged Battery is
inserted. However, the Collar may be awake or asleep. Motion
Sensor Technology allows the Collar to conserve Battery life when
appropriate by putting the Collar to sleep. The Collar light will not
flash when the Collar is asleep. Movement, such as gently shaking
the Collar, will awaken it and the Collar light will flash green.
The Collar light will flash red to indicate that the Battery needs to
be recharged. The Controller also displays the Battery status so you
know when it needs to be recharged.
Havahart®Wireless Collar Light Chart:
-Collar is asleep OR
-Battery is too low OR
-Battery is not in the Collar
-Normal operation
-Collar is paired to the
Controller
-Low Battery
OR
-Boundary Breach
Collar Light ActionCollar Status
Off
Slow Green Flash
Every 4-5 Seconds
Red Flash
Shake gently and watch
for the Collar light to flash
green. Make sure a fully
charged Battery is in the
Collar.
No action required.
Charge the Battery OR
Return the dog to the
Roaming Area.
The Collar should not be placed on your
dog until after you have successfully
installed it on the system.
Install one Collar at a time. The system
allows you to activate up to 2 Collars.
The default correction level of the Collar is
set to Tone-Only, which you need to use to
set up your Fence Boundary.
!
IMPORTANT MESSAGE
Recharging a Battery:
Note: Always have a spare Battery ready to go when
your other Battery gets low. You should expect to
charge the Battery every day.
Warning: Do NOT put a non-rechargeable Battery in the
Battery Charger.
Correct way to insert a
Battery in the Charger.
-Remove the low Battery from the Collar.
-Make sure the Battery Charger is properly connected
to a grounded120V AC outlet not operated by a
light switch. When plugged in, the Charger will
display red until the Battery is fully charged. Once
fully charged, the light on the Charger will turn
green.
-Properly orient the Battery in the Charger with the
positive side closest to the lights of the Charger.
-Remove the Battery when recharging is complete.
Recharging Light Colors:
Green - when the Battery is fully charged
Red - when the Battery is charging
No Lights - the Charger is empty, or the Batteries
are inserted improperly
Figure 1.4
Battery Installation
RCR123 3V +
-
Collar light
Screen 1.4
Installing the Radial-Shape Select Havahart®Wireless Dog Fence Installing the Radial-Shape Select Havahart®Wireless Dog Fence

13
Setting Up the Fence Boundary/ Trigger Zone
www.HavahartWireless.com 1-800-800-1819, Option 453
Setting Up the Fence
Boundary/Trigger Zone
3
F
e
n
c
e
B
o
u
n
d
a
r
y
/
T
r
i
g
g
e
r
Z
o
n
e
Illustration C
Screen 1.9
Establishing the Fence Boundary/Trigger Zone Distance:
1. Estimate the distance between the Controller and the desired
boundary location. This distance will be the radius of the Fence
Boundary all the way around the Controller.
2. Set the radius on the Controller
• From the Setup Menu, select Fence Setup (see Screen 1.1 on page 13).
• Use the up/down arrow keys to scroll to the desired Fence radius
distance and press Enter (see screen 1.9). The minimum radius
is 40 feet, and the maximum radius is 400 feet from the
Controller in all directions.
• Select OK to save your settings.
3. Test the Trigger Zone
• To confirm that the location of the actual Boundary is correct...
- Set the Collar to Tone-Only.
- Extend your arm down by
your side and hold the Collar
by the Battery Housing
so that you can see the Collar
Light (see Figure 1.5). Make
sure that your body does not
get between the Collar and
the Controller as your body may affect the signal and cause
the Boundary to shift inward (see Factors Affecting Signal
Strength on Page 8).
- Walk toward the Boundary while gently moving the Collar
until the Collar beeps and the Collar light flashes red. To
confirm the Boundary location, step back until the Collar
stops beeping and then walk forward in the same direction
until the Collar beeps and the Collar light flashes red again. If
necessary, note how far from the desired location the actual
setting is. Place a Flag at the Boundary location
(see Illustration C). If you have to change the Boundary
distance, you will know where your Boundary was and to
where you are moving it. If the location is correct, place a Flag
to start the Flag line of your Fence Boundary.
4. Adjust the Fence Distance on the Controller accordingly using
the instructions in Step 2 until the desired Boundary location is
established.
R
O
AMING ARE
A
20’
Illustration B
Your Trigger Zone should be NO closer
than 20 feet to ANY ROAD, SIDEWALK
OR THOROUGHFARE FOR YOUR DOG’S
SAFETY.
TRIGGER ZONE SHAPE: It is normal that
your Trigger Zone MAY NOT FORM A
PERFECT CIRCLE and the actual distance
from the Trigger Zone to the Controller
may be less than the set radius. A reduced
fence radius may be the result of Factors
Affecting Signal Strength (see Page 8).
Large metal objects such as a car or large
appliance can slightly distort the shape of
your Fence Boundary.
!
IMPORTANT MESSAGE
NOTE : Use the shortest distance to a property boundary as a
starting point for the radius of the Fence Boundary (see Illustration B).
Figure 1.5
14
Turning a Collar Off/On:
On the Controller...
• Select Setup Menu (see Screen 1.0).
• Select Collar Setup (see Screen 1.1).
• Select Correction Level (see Screen 1.2).
• Select Turn Collar off/on (see Screen 1.3).
• Press Enter.
Removing a Collar:
On the Controller...
• Select Setup Menu (see Screen 1.0).
• Select Collar Setup (see Screen 1.1).
• Select Delete a Collar (see Screen 1.2). If you have more than
one Collar installed, select the number of the Collar that you
would like to remove.
• Select YES.
• Select OK.
• Select OK Again.
Is good (see screen 1.7).
Is good.
Needs to be replaced and recharged.
A Low Battery Alert will appear (see screen 1.8).
Is not in or properly connected in the Collar, or the Collar
is asleep to conserve Battery life.
Checking Battery Status:
1. Select “Display Options” (see Screen 1.5) .
2. Select “Show Collar Monitor” (see Screen 1.6).
Battery
Status Means Battery:
HIGH
MED
LOW/
REPLACE
NA
NOTE: Routinely monitor the Battery status of your Collar(s) to
understand when the Battery may need to be changed. Battery
life is 1-3 days, depending on your dog’s activity level.
Screen 1.6
Screen 1.5
Screen 1.7
Screen 1.8
Setting Up the Collar
Screen 1.0
Screen 1.2
Screen 1.1
Screen 1.3
Screen 1.4
Installing the Radial-Shape Select Havahart®Wireless Dog Fence Installing the Radial-Shape Select Havahart®Wireless Dog Fence

16
Setting Up the Fence Boundary/Trigger Zone
15 www.HavahartWireless.com 1-800-800-1819, Option 453
Display Options:
Viewing Distance to Dog and Battery Status (see Screen 2.3):
• Select Display Options (see Screen 2.1).
• Select Show Collar Monitor (see Screen 2.2).
Turning the Display Off/On (see Screen 2.2):
• Select Display Options (see Screen 2.1).
• Select Display Off (see Screen 2.2).
• Press Enter to turn the display back on.
Setting Alarm Options:
Setting Alarm Volume Level (see Screen 2.5):
• Select Display Options (see Screen 2.1).
• Select Alarm Options (see Screen 2.2).
• Select Alarm Volume Level (see Screen 2.4).
• Use the up or down arrow keys to choose the desired alarm
level. Select HIGH, LOW, or OFF (see Screen 2.5).
• Press Enter.
• Select OK to save.
Turning Boundary Breach Alert Off/On (see Screen 2.6):
• Select Display Options (see Screen 2.1).
• Select Alarm Options (see Screen 2.2).
• Select Boundary Breach (see Screen 2.4).
• Use the up or down arrow keys to turn the boundary breach
alert OFF or ON (see Screen 2.6).
• Press Enter.
• Select OK to save.
Screen 2.3
Screen 2.4
Screen 2.5
Screen 2.6
Screen 2.1
Screen 2.2
NOTE: See Battery Status Level meanings on Page 13.
NOTE: Turning off the display will NOT turn off the System.
NOTE: It is recommended to set the alarm volume level to HIGH.
NOTE: It is recommended to keep the Boundary Breach Alert ON.
Setting Up the Fence Boundary/Trigger Zone
Placing Training Flags:
Once your Boundary is established, it’s time to place the remaining
Training Flags. Training Flags are critical for the effective training of
your dog.
1. Repeat the process in Step 3 of Establishing the Fence
Boundary/Trigger Zone Distance by walking toward the Fence
Boundary about 6 feet (2 paces) to the right of the previous
Flag, verifying the Fence Boundary, placing a Flag, and then
stepping back into the Roaming Area.
2. Repeat Step 1 until the entire containment area is surrounded
(see Illustration D).
NOTE : Consult the Flag Calculator on Page 7 to determine the
number of Flags you need.
NOTE: These Flags represent the location of your Wireless
Fence and will be used later to train your dog. Be sure that
the Flags form an enclosed area and that your dog has safe,
adequate entry to your house.
F
e
n
c
e
B
o
u
n
d
a
r
y
/
T
r
i
g
g
e
r
Z
o
n
e
6
f
t
6
f
t
Illustration D
Turning the Trigger Zone Off/On:
1. Navigate to the Menu where Setup Menu and Display Options
are listed (see Screen 2.0).
2. Press the blue flashing Power Button to Turn Off the Trigger
Zone (see Figure 1.6).
3. Press the Power Button again to Turn On the Trigger Zone.
NOTE: All settings will be retained in system memory
when you Turn Off the System.
If you would like to confirm that the Havahart®Wireless Collar
will deliver a Static correction when crossing the Trigger Zone,
you can use the Heart-Shaped Collar Tester. Set the correction
level to Static Level 1. Hold the metal contact points located
inside the holes of the Heart-Shaped Collar Tester against
the Probes of the Havahart®Wireless Collar so that metal is
touching metal. Carry the Havahart®Wireless Collar by the
Battery Housing with the Heart-Shaped Collar Tester held
against the Probes. Extend your arm down by your side. Make
sure that your body does not get between the Collar and the
Controller as your body may affect the signal and cause the
Boundary to shift inward. Walk to a Boundary point and watch
the Heart-Shaped Collar Tester illuminate. Remember to set
the correction level back to Tone-Only for training.
Screen 2.0
Figure 1.6
Power
Power Button
Installing the Radial-Shape Select Havahart®Wireless Dog Fence Installing the Radial-Shape Select Havahart®Wireless Dog Fence

17
Fitting a Collar
www.HavahartWireless.com 18
1-800-800-1819, Option 453
Important Collar Safety Guidelines:
1. During training, do not let your dog wear the Collar without
direct supervision.
2. Each time you take the Collar off your dog, look for any indication
of a sore or rash.
3. Should you find any indication of a sore or rash on your dog, stop
using the Collar for a few days.
4. If the rash or sore exists for more than 2 days, consult your
veterinarian.
5. Wash your dog’s neck weekly with mild soap and a wash cloth
and then rinse clean.
6. Wash the Probes of the Collar weekly with mild soap and a wash
cloth and then rinse clean.
If you do not remove the Collar from your
dog’s neck at least every 12 hours AND
clean your dog’s neck and the Collar,
Pressure Necrosis may occur which is a
deterioration of your dog’s skin. It is caused
by extended contact to the pressure of the
Collar Probes combined with the oil and dirt
that may accumulate on the Probes if not
kept clean.
IMPORTANT MESSAGE !
Fitting a Collar
Fitting a Collar
To ensure the safe and effective operation of the system, it is
important to make sure that the Collar is fitted properly.
1. Be sure the Fence is turned off at the Controller (see
Turning the Trigger Zone Off/On on Page 15).
2. With your dog standing comfortably, position the Collar high
on your dog’s neck, underneath the chin with the Probes
facing upward and centered on your dog’s neck. The Havahart®
Wireless logo should be right side up when you look at your dog.
3. Make sure the Probes maintain contact with skin.
• Collar is factory-installed with Long Probes for thick or
long-haired breeds.
• Short Probes for short-haired dogs are included.
• To change the Probes, simply unscrew the Long Probes and
replace them. Be sure the rubber washer is between the
Probe and the Battery Housing. Use your fingers to tighten
the Probes as far as you can. Do not over tighten.
4. Adjust the Collar to fit snugly but not tightly. You should be
able to slide the tip of one finger between your dog’s coat
and one of the Probes on the Collar. It should be a tight squeeze
(see Illustration E). Separately, you should be able to slide one finger
between the Collar Strap and the back of your dog’s neck.
stra
5. Once the Collar is adjusted to the correct length, remove
the Collar and trim the excess Strap using scissors (see Illustration F). Burn
the end of the Strap with a match to prevent fraying.
4The Collar should be snug enough so that
it does not move when your dog moves.
To help prevent skin irritation, it is vet-
recommended that you never leave the
Collar on your dog for more than 12
consecutive hours at a time.
Illustration E
Illustration F
IMPORTANT MESSAGE !
NOTE: It may be necessary to trim the hair on your dog’s neck
around the Probes to ensure reliable contact with your dog’s skin.
NOTE: If your dog is going to continue to grow or grows a long
winter coat, leave extra room before trimming off the excess Strap.
Installing the Radial-Shape Select Havahart®Wireless Dog Fence Installing the Radial-Shape Select Havahart®Wireless Dog Fence

19 20
Training Your Dog
Training Your Dog
Training Your Dog
www.HavahartWireless.com 1-800-800-1819, Option 453
PRELIMINARY PHASE -- Flag AwarenessTraining - Optional (2-3 training sessions per day: each 10-15 minutes long)
Completing this phase will add 3 days to your training, but will give your dog more time to get used to the Training
Flags if you choose to complete it.
1. Turn OFF the Fence(see Page 15).
2. Fit the Havahart®Wireless Collar around your dog’s neck. Place a different
non-metal collar above the Havahart®Wireless Collar and attach a leash to it.
Make sure that this collar does not apply pressure to the Probes on
the Havahart®Wireless Collar as this could hurt your dog when you pull on
the leash.
3. Using the leash, walk your dog around inside the Roaming Area for
5 minutes, avoiding contact with the Trigger Zone.
4. Approach one of the Training Flags with your dog. When your dog gets close to the flag, gently shake the
flag while saying “Bad Flags” in a firm, disapproving tone. Do not yell or frighten your dog.
5. Lead your dog back into the Roaming Area and praise your dog.
6. Repeat this process at several different Training Flags.
7. End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from the
Training Flags.
8. Be sure to remove the Havahart®Wireless Collar from your dog after each training session.
9. You may proceed to PHASE 1 when your dog avoids going near the Training Flags but will walk anywhere
within the Roaming Area.
IMPORTANT REMINDERS:
Please read the following information completely before you
begin training:
•Proper training of your dog is essential to help ensure the
successful operation of your Radial-Shape Select Havahart®
Wireless Dog Fence.
•We recommend that you train your dog for a minimum of 3 weeks. Use a calendar to track your dog’s progress.
•Keep your training sessions short and frequent -- approximately 10-15 minutes long, 2-3 times a day.
•Every dog is unique and may respond differently to the training depending on his age, size and temperament.
For this reason, you may need to adjust your training schedule accordingly.
•It may be necessary to decrease the speed of the training schedule or add more training days if your dog seems
to be under stress. Signs that your dog may be under stress include: tail between legs, ears pulled back, refusal
to go outside the home and nervous shaking.
•Before beginning Collar-assisted training, allow your dog to get used to wearing the Havahart®Wireless Collar with
the Battery removed.
•Have fun with your dog during the training process and end each session with positive praise and play time in
the Roaming Area at least 10 feet away from the Training Flags.
•Be patient and consistent in your approach.
•Remove the Havahart®Wireless Collar after each training session.
•If you are training more than one dog, train each dog separately.
•Should your dog breach the Trigger Zone while wearing the Havahart®Wireless Collar, unlike an underground wire fence,
your dog will not receive a separate correction for returning through the Trigger Zone back into the Roaming Area.
•It is important that you complete the entire training process and do not skip any phases.
The Radial-Shape Select Havahart® Wireless
Dog Fence is not a physical Boundary. It is
necessary to contain your dog using a leash
or other means during training.
IMPORTANT MESSAGE
Leaving the Roaming Area with Your Dog
Once your dog becomes accustomed to the Trigger Zone, he may become uncomfortable leaving the Roaming Area for
activities such as walks or riding in the car. If you need to take your dog out of the Roaming Area, ALWAYS remove the
Havahart®Wireless Collar and use one of the following methods:
1. Walk your dog outside of the Roaming Area while on a leash. Cross the same area of the Trigger Zone
flag line each time, giving a command such as “CROSS”, and praising your dog for crossing this specific
area. Always leave this area with your dog on a leash.
2. Carry your dog out.
3. Take your dog out in a car.
!

21 22
Training Your Dog
Training Your Dog
Training Your Dog
www.HavahartWireless.com 1-800-800-1819, Option 453
PHASE 2 -- Active Training -- DAY 4-7 (2-3 training sessions per day: each 10-15 minutes long)
1. Set the correction level to Static Level 1 (see Page 12).
2. To ensure the system is working properly, take the Havahart®Wireless Collar to the Trigger Zone and use the
Heart-Shaped Collar Tester (see Page 15). The Heart-Shaped Collar Tester should light up.
3. Fit the Havahart®Wireless Collar around your dog’s neck. Place a different
non-metal collar above the Havahart®Wireless Collar and attach a leash
to it. Make sure that this collar does not apply pressure to the Probes on
the Havahart®Wireless Collar as this could hurt your dog when you pull
on the leash.
4. Using the leash, walk your dog inside the Roaming Area for 5 minutes,
avoiding contact with the Trigger Zone.
5. Calmly approach the Trigger Zone flag line -- do not look at your dog.
6. Give your dog the opportunity to pass into the Trigger Zone, where he will hear a short tone and then receive
a Static correction.
7. Allow your dog to stay in the Trigger Zone for a few seconds while receiving the Static correction.
8. Gently shake a Training Flag to remind your dog that the flags are associated with the short tone and Static
correction coming from the Collar.
9. Lead your dog back into the Roaming Area and praise your dog.
10. Repeat this process at a few Training Flags.
11. If your dog does not respond to the Static correction, check to make sure that the Havahart®Wireless Collar fits
properly (see Page 17). If your dog continues to not respond to the Static correction, you may need to
increase the Static correction to Level 2 or higher as necessary.
12. End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from the
Training Flags.
13. Be sure to remove the Havahart®Wireless Collar from your dog after each training session.
14. You may proceed to PHASE 3 when your dog avoids going near any of the Training Flags.
!
IMPORTANT MESSAGE
Do not force your dog to receive too many Static corrections as this may make your dog nervous or anxious. It may be
necessary to decrease the speed of the training schedule or add more training days if your dog seems to be under stress.
If your dog leaves the Roaming Area, he will be corrected on the way out only. Your dog will NOT be corrected when returning
to the Roaming Area from outside the Trigger Zone.
PHASE 1 -- Passive Training -- DAY 1-3 (2-3 training sessions per day: each 10-15 minutes long)
1. TurnON thefence (see Page 15), insert a fully charged Battery in the Havahart®Wireless Collar, and set the correction
level to Tone-Only (see Page 12).
2. To ensure that the system is working properly, take the Havahart®
Wireless Collar by itself out to the Trigger Zone and listen for the tone.
3. Fit the Havahart®Wireless Collar around your dog’s neck. Place a
different non-metal collar above the Havahart®Wireless Collar and
attach a leash to it. Make sure that this collar does not apply pressure
to the Probes on the Havahart®Wireless Collar as this could hurt your
dog when you pull on the leash.
4. Using the leash, walk your dog inside the Roaming Area for 5 minutes,
avoiding contact with the Trigger Zone.
5. Calmly approach the Trigger Zone flag line -- do not look at your dog.
6. Give your dog the opportunity to pass into the Trigger Zone, where he will hear a tone.
7. Allow your dog to stay in the Trigger Zone for a few seconds while hearing the tone.
8. Gently shake a Training Flag while saying “Bad Flags” in a firm, disapproving tone to show your dog
that the flags are associated with the tone coming from the Havahart®Wireless Collar. Do not yell or
frighten your dog.
9. Lead your dog back into the Roaming Area and praise your dog.
10. Repeat this process at several different Training Flags.
11. As training progresses over the next 2 days, you should notice that when your dog hears the tone, he
will return to the Roaming Area without your prompting.
12. End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from
the Training Flags.
13. Be sure to remove the Havahart®Wireless Collar from your dog after each training session.
14. You may proceed to PHASE 2 when your dog avoids going near the Training Flags when you approach and
actually turns to go back to the Roaming Area without your aid.
If your dog does not respond to the static correction.
• Make sure the Static correction Level is set to 1 or above.
• Test the Havahart®Wireless Collar with the Heart-Shaped Collar Tester to confirm Static correciton.
• If the Tester lights up when you cross into the Trigger Zone, check the fit of the Havahart®Wireless Collar on your dog.
• If necessary, trim your dog’s hair where the Probes touch the neck and/or switch to the Long Probes.
• Increase the Static correction by one level.

23 24
Training Your Dog
www.HavahartWireless.com 1-800-800-1819, Option 453
Training Your Dog
PHASE 4 -- Off-Leash Supervision -- DAY 12-15
Begin with short training sessions 10-15 minutes in length and gradually increase the sessions to an hour or more
1. Set the correction level to Static Level 1 (see page 12).
2. Do not leave your dog unattended during this phase of training
3. Fit the Havahart®Wireless Collar around your dog’s neck. Place a different
non-metal collar above the Havahart®Wireless Collar.
4. Walk around inside the Roaming Area and play with your dog while
off the leash.
5. Now focus your attention elsewhere and walk to another part of the
yard while keeping an eye on your dog.
6. If your dog crosses into and goes beyond the Trigger Zone, lead him
back inside the Roaming Area. Your dog will not be corrected when
he comes back into the Roaming Area.
7. Gently shake a flag to remind your dog that the flags are associated with
the short tone and Static correction coming from the Havahart®Wireless
Collar.
8. Repeat the training from Phase 3 with distractions and a leash as
necessary.
9. End with lots of playtime and praise for your dog in the Roaming Area
at least 10 feet away from the Training Flags.
10. Be sure to remove the Havahart®Wireless Collar from your dog after each training session.
11. You may proceed to PHASE 5 when your dog no longer goes beyond the Trigger Zone — even with distractions,
but will walk anywhere within the Roaming Area.
PHASE 3 -- On-Leash Distractions -- DAY 8-11 (2-3 training sessions per day: each 10-15 minutes long)
1. Set the correction level to Static Level 1 (see page 12).
2. Fit the Havahart®Wireless Collar around your dog’s neck. Place a
different non-metal collar above the Havahart®Wireless Collar and
attach a leash to it. Make sure that this collar does not apply pressure
to the Probes on the Havahart®Wireless Collar as this could hurt your
dog when you pull on the leash.
3. Using the leash, walk your dog toward the Training Flags.
Create a distraction by:
1. Tossing a toy or treat outside the Trigger Zone.
2. Having someone walk by and not pay attention to your dog.
3. Having someone walk his/her own dog outside of the Trigger Zone.
4. If your dog does not move toward the distraction, immediately praise him.
5. If your dog moves toward the distraction, allow him to walk through the Trigger Zone and feel the correction.
6. Gently shake a Training Flag to remind your dog that the flags are associated with the short tone and Static
correction coming from the Havahart®Wireless Collar.
7. Promptly lead your dog back to the Roaming Area if he does not return within a few seconds and praise him.
8. Repeat this process at several different Training Flags.
9. If your dog does not respond to the Static correction, check to make sure that the Havahart®Wireless Collar fits
properly (see Page 17). If your dog continues to not respond to the Static correction, you may need to increase the
Static correction by one level or more as necessary.
10. End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from the
Training Flags.
11. Be sure to remove the Havahart®Wireless Collar from your dog after each training session.
12. You may proceed to PHASE 4 when your dog will not go beyond the Trigger Zone — even with distractions,
but will walk anywhere within the Roaming Area.
Training Your Dog

25 26
Troubleshooting
www.HavahartWireless.com 1-800-800-1819, Option 453
Troubleshooting
Issue: Solution:
The Controller is not able to
find the Havahart®Wireless
Collar and add it to the System.
The Controller Distance to
Dog does not exactly match
the actual distance to the
Havahart®Wireless Collar.
The Trigger Zone seems to
fluctuate.
The Havahart®Wireless Collar
is not beeping when setting up
the Fence Boundary.
IF ANY OF THE SOLUTIONS TO YOUR ISSUES CANNOT BE
FOUND, PLEASE CALL 1-800-800-1819, Option 453
or visit www.HavahartWireless.com.
•See Page 12 -- Activating a Collar.
•Make sure that the Collar has a fully charged, properly installed Battery. The positive
side faces outward.
•Gently shake the Collar (Collar light will flash green) to keep it awake when the
Controller searches for it.
•If you are adding an additional Collar to the system, use a permanent marker to
identify the Collars by number. This will ensure you are not trying to add to a
Collar that is already paired to the Controller.
•If the Collar has already been added to the system, remove the Collar from
the system (see Page 13) and then add the Collar again.
•You can set your Trigger Zone distance to any number between
40-400 feet, in 5 foot increments.
•This is normal. The Trigger Zone can be up to 3-6 feet wide as a result of
interference from other objects (see Factors Affecting Signal Strength on Page 8).
•Where the Havahart®Wireless Collar delivers a correction is influenced by the speed
and orientation of the Havahart®Wireless Collar as your dog crosses the Trigger Zone.
•Check that the Controller is plugged into a working 120V AC outlet not operated by a
light switch, turned on, the LCD screen is displaying text, and the correction level and
Fence Boundary distance are set to your desired levels.
•Make sure that the Collar has a fully charged, properly installed Battery. The positive
side faces outward.
•Make sure that the Collar has been properly added to the Controller (see Page 12)
and the correction level is set to Tone-Only.
•Make sure to shake the Collar to keep it awake when crossing the Trigger Zone.
•If you cannot hear the beep because you are in a noisy area, watch for the Collar
light to flash red (see Page 14) to determine the location of the Fence Boundary.
IN MOST CASES, you should unplug the
Controller and then plug it back in to reset the
system before attempting troubleshooting.
System settings will be retained in memory.
!
IMPORTANT MESSAGE
PHASE 5 -- Dog Monitoring -- DAY 16 AND BEYOND
Start with short sessions and gradually increase duration
1. Set the correction level to Static Level 1 (see page 12).
2. Your dog should now be comfortable within the Roaming Area and reluctant to cross the Trigger Zone
with or without distractions.
3. Fit the Havahart®Wireless Collar around your dog’s neck. Place a different non-metal Collar above the Havahart®Wireless
Collar.
4. Allow your dog to roam freely off leash within the Roaming Area.
5. Keep an eye on him from inside your house.
6. End with lots of playtime and praise for your dog in the Roaming Area at least 10 feet away from the Training Flags.
7. Be sure to remove the Havahart®Wireless Collar from your dog after each training session.
NOTE: After completing the training and three additional weeks of successful dog containment, you
can begin to gradually remove the Training Flags by taking away every other flag, every few days.
CONGRATULATIONS TO YOU AND YOUR DOG FOR SUCCESSFULLY COMPLETING
ALL PHASES OF TRAINING!
Training Your Dog
Training Your Dog
TIPS
1. Before beginning training, work with your dog to be sure he understands the concepts of “come” and “leave it.”
2. Introduce the Wireless Collar early in the training process by offering treats when fitting the Collar.
3. Complement this training program with positive reinforcement, such as praise or treats. If using praise, use the same
word each time.
4. In order for your dog to associate a correction with a behavior, the corretion must occur immediately. When your dog
crosses the Fence Boundary, immedately say, “Bad Flags.”

27 www.HavahartWireless.com
Troubleshooting
Troubleshooting
28
Troubleshooting
1-800-800-1819, Option 453
Issue: Solution:
The Havahart®Wireless Collar
is not beeping or delivering a
Static correction.
The Havahart®Wireless Collar
is beeping everywhere.
The Havahart®Wireless Collar
is beeping inside the home.
The Havahart®Wireless Collar
is beeping but my dog is
not responding to the Static
correction.
•Check that the Controller is plugged into a working 120V AC outlet not operated by a
light switch, turned on, the LCD screen is displaying text, and the correction level and
Fence Boundary distance are set to your desired levels.
•Make sure that the Collar has a fully charged, properly installed Battery. The positive
side faces outward.
•Make sure that the Collar has been properly added to the Controller and the
correction level is set to Static Level 1 (see Page 12).
•Make sure to shake the Collar to keep it awake when crossing the Trigger Zone.
•Check that the Controller is plugged into a working 120V AC outlet not operated by a
light switch, turned on, the LCD screen is displaying text, and the correction level and
Fence Boundary distance are set to your desired levels.
•Make sure that the Collar has a fully charged, properly installed Battery. The
positive side faces outward.
•Make sure that the Collar has been properly added to the Controller (see Page 12).
•If the situation persists, try these methods:
1. Place the Controller above or at least 3 feet away from appliances
and other large metal objects like mirrors.
2. Raise the Controller to 6 feet or to a higher floor in the home.
3. Expand the Fence Boundary by increasing the Fence radius on
the Controller.
4. If the first three methods prove ineffective, choosing an altogether
different Controller location in the home may be necessary.
•If relocating the Controller, remove the Havahart®Wireless Collar from your dog
before turning off the Controller.
•Check that the Controller is plugged into a working 120V AC outlet not operated by a
light switch, turned on, the LCD screen is displaying text, and the correction level and
Fence Boundary distance are set to your desired levels.
•Make sure that the Collar has a fully charged, properly installed Battery. The
positive side faces outward.
•Make sure that the Collar has been properly added to the Controller (see Page 12).
•Expand the Fence Boundary by increasing the Fence radius on the Controller to ensure
the entire home is within the Roaming Area. If not, adjust the Fence Boundary distance
or move the Controller to include the entire home in the Roaming Area.
•If relocating the Controller, remove the Havahart®Wireless Collar from your dog
before turning off the Controller.
•Make sure the Static correction level is set to Static Level 1 or above.
•Test the Havahart®Wireless Collar with the Heart-Shaped Collar Tester.
•If the Tester lights up, check the fit of the Havahart®Wireless Collar.
•If necessary, trim your dog’s hair where the Probes touch the neck and/or
switch to the Long Probes.
•Increase the Static correction by one level.
•Repeat training steps as necessary.
Issue: Solution:
The Havahart®Wireless Collar
is beeping in the middle of the
yard.
The LCD screen on the
Controller is not on.
The Indicator Light on the
Havahart®Wireless Collar has
turned a solid green color and
the Controller is not sensing
the Havahart®Wireless Collar.
My dog reacts strongly to
the Static correction and has
demonstrated signs of stress.
•Check that the Controller is plugged into a working 120V AC outlet not operated by a
light switch, turned on, the LCD screen is displaying text, and the correction level and
Fence Boundary distance are set to your desired levels.
•Make sure that the Collar has a fully charged, properly installed Battery. The
positive side faces outward.
•Make sure that the Collar has been properly added to the Controller (see Page 12).
•The Havahart®Wireless Collar may beep when it loses the Controller signal as a
result of interference from other objects (see the section about Factors
Affecting Signal Strength on Page 8). This sometimes occurs if a large metallic
object is between the Havahart®Wireless Collar and the Controller, if the orientation
of the Havahart®Wireless Collar changes near the Trigger Zone, or if the surrounding
electronic signals interfere with the signal.
•If the situation persists, try these methods:
1. Place the Controller above or at least 3 feet away from appliances
and other large metal objects like mirrors.
2. Raise the Controller to 6 feet or to a higher floor in the home.
3. Expand the Fence Boundary by increasing the Fence radius on
the Controller.
4. If the first three methods prove ineffective, choosing an altogether
different Controller location in the home may be necessary.
•If relocating the Controller, remove the Havahart®Wireless Collar from your pet
before turning off the Controller.
•Make sure the Controller power switch is on (blue light is flashing) and
the AC Adapter Power Cord is fully connected and plugged into the
Controller and a working standard 120V AC outlet. Make sure that the
electrical outlet where the AC Adapter Power Cord is connected is not
controlled by a light switch. If it is, move the AC Adapter Power Cord to
another outlet or make sure the light switch stays on all the time.
•Twist the Battery Cap slightly clockwise.
•If the situation persists, unscrew the Battery Cap by twisting it counterclockwise,
remove the Battery, replace the Battery and screw the Battery Cap back in place.
•If possible, lower the Static correction level.
•Make sure you are in control of the situation when your dog receives his first
Static corrections (have him on a leash attached to a separate, non-metal collar)
and lead him into the Roaming Area and praise him. If your dog continues to
show signs of stress, suspend training and start again the next day.
•Make sure to end all training sessions on a positive note with lots of playtime and
praise in the Roaming Area at least 10 feet away from the Training Flags.

29 30
Warranty Information
www.HavahartWireless.com
Terms of Use and Limitation of Liability
1-800-800-1819, Option 453
1. Terms of Use
This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this
Product implies and acknowledges on your behalf acceptance of all such terms, conditions, and notices.
2. Proper Use
This Product is designed for use with dogs as a training aid. Because of the specific personality, temperament, size and age of your dog, this Product may
not be appropriate for your dog. Use of this Product is not recommended if your dog is less than six (6) months old, weighs less than eight (8) pounds or
if your dog has ever exhibited signs or symptoms of aggressive behavior. You should consult a veterinarian or certified trainer if you have any concerns
or questions regarding the suitability of this Product for use on your dog. Proper use of this Product includes, but is not limited to, reviewing the entire
Instruction Manual provided with your Product including all important messages and notes.
3. No Unlawful or Prohibited Use
This Product is designed for use with dogs only. This dog training device is not intended to harm, injure or provoke. Using this Product in a way that is not
intended could result in violation of Federal, State or Local Laws.
4. Limitation of Liability
In no event shall Woodstream Corporation be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages
whatsoever arising out of or connected with the use or misuse of this Product. The original purchaser assumes all risks and liability from the use of this
Product and agrees, by usage of this Product, to hold harmless and indemnify Woodstream Corporation, their officers, agents, and employees, from any and
all liability, loss, damages, costs or expenses which are sustained, incurred, or required arising out of your actions while using this Product.
5. Modification of Terms and Conditions
Woodstream Corporation reserves the right to change, alter, amend, and/or revoke the terms, conditions and notices under which this Product is offered.
FCC WARNING: Changes or modifications to this device not expressly approved by Woodstream Corporation could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
WIRELESS COLLAR: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION
Caution
The Radial-Shape Select Havahart®Wireless Dog Fence is neither a physical barrier nor a substitute for traditional obedience training. The system is designed
to act as a deterrent to remind dogs by auditory and/ or static correction to remain in the Fence Boundary established. It is important that you reinforce training
with your dog on a regular basis. Since the tolerance level to static correction varies from dog to dog, Woodstream Corporation CANNOT and DOES NOT
guarantee or warrant that the system will, in all cases, keep a dog within the established Fence Boundary. Not all dogs can be trained to avoid crossing the
Trigger Zone! Therefore, if you have reason to believe that your dog may pose a danger to others or harm himself if he is not kept from crossing the Trigger
Zone, you should NOT rely solely upon the Radial-Shape Select Havahart®Wireless Dog Fence to confine your dog. Woodstream Corporation shall NOT be
liable for any property damage, economic loss or any consequential damages sustained as a result of any animal crossing the Trigger Zone.
Terms of Use and Limitation of Liability
Radial -Shape Select Havahart®Wireless Fence 10 Year Parts & 12 Month Labor
LIMITED WARRANTY TO ORIGINAL PURCHASER
Woodstream Corporation warrants its products to be free from defects in materials and workmanship for the warranty period from the purchase date. Activate your
warranty online at www.HavahartWireless.com or return the completed form included with your product.
The Radial-Shape Select Havahart®Wireless Fence Controller is covered under warranty for ten (10) years from the date of purchase by the original purchaser and
labor is covered for a period of one year (and under no circumstances to exceed a period of 365 days) from the date of purchase by the original purchaser. Thereafter,
a service charge may apply for the repair or replacement of the product. This warranty DOES NOT cover the Wireless Collar or any accessories. The Radial-Shape Select
Wireless Collar is covered under warranty for one (1) year from the date of purchase by the original purchaser. To receie warranty service, the purchaser must first contact
Woodstream Corporation for problem determination and service procedures. Please have the serial number and product available.
This product is engineered for use with dogs at least 6 months old who are greater than 8 lbs. We recommend not using this product if your dog is younger than 6
months old, weighs less than 8 lbs., or has an aggressive temperament. If you are unsure whether this is appropriate for your dog, please consult your veteranarian or
certified dog trainer.
This product is engineered to be used with dogs only. This product is intended for training purposes only and is not intended to harm, injure, or provoke. Using this
product in a way that is not intended could result in violation of Federal, State, or local laws.
If Woodstream Corporation determines that this product needs to be returned, Woodstream Corporation will issue a Return Goods Authorization (RGA) number. The
defective unit or parts must be returned to Woodstream Corporation, or specified authorized agent, for warranty inspection with the RGA number labeled on the outside
of the package within (10) days of return authorization date. Products returned without authorization will be refused.
Woodstream Corporation will repair or replace this product, at Woodstream Corporation’s option and at no charge as stipulated herein, with new or reconditioned
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of Woodstream
Corporation or authorized agent. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
Limitations and Exclusions:
This product is neither a physical barrier nor a substitute for traditional obedience training. Due to variances in canine personality, temperament, size, and age, as well as
due to potential influences on your dog outside of Woodstream Corporation’s control, Woodstream does not guarantee or warrant the effectiveness of this product.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncommercial use of this product, and shall not apply to the
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered
product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems,
utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by Woodstream Corporation
which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating
instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY
PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT
SHALL BE BINDING ON WOODSTREAM CORPORATION. WOODSTREAM CORPORATION SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO
REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE
THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF WOODSTREAM CORPORATION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST WOODSTREAM CORPORATION BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE PRODUCT SOLD BY WOODSTREAM CORPORATION AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY WOODSTREAM CORPORATION NOT CAUSED DIRECTLY BY THE NEGLIGENCE
OF WOODSTREAM CORPORATION. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations
or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Caution:
The Havahart®Wireless Dog Fence is NOT a solid barrier. Our system is designed to work, in conjunction with training, to provide a deterrent for your dog to remain in
the established boundary. Since the tolerance level to tone and static correction varies from pet to pet, Havahart®Wireless CANNOT guarantee that the system will, in
all cases, keep a dog within the established boudnary. Not all pets can be trained to avoid leaving the established boundary. If you have a reason to believe that your pet
may pose a danger to others or harm himself if they are not kept within the boundary, you should NOT rely solely upon the Havahart®Wireless System to confine your
dog. Havahart®Wireless shall NOT be liable for any property damage, economic loss, or any consequential damages sustained as a result of any animal crossing the
boundary.
Warranty Information

Havahart® Wireless
Woodstream Corporation
69 North Locust Street
Lititz, PA 17543 | 1-800-800-1819 option 453
http://www.HavahartWireless.com
Manuel
d’instructions
REV 02-15
NE RETOURNEZ PAS CE PRODUIT AU MAGASIN
POUR QUELQUE RAISON QUE CE SOIT.
COMMUNIQUEZ DIRECTEMENT AVEC HAVAHART®WIRELESS!
COMPOSEZ LE 1 800 800-1819, OPTION 453.
1440601
Covered by 1 or more of U.S. Patents
8,297,233, 8,701,600, 8,726,845 and 1
or more U.S. Patents Pending.

Controller
Fence Radius
2
Table des matières
Table des matières
RAPPELS DE SÉCURITÉ IMPORTANTS : .......................................................................................................................
COMPOSANTS DU SYSTÈME .......................................................................................................................................
DÉFINITIONS CLÉS, TECHNOLOGIE ET FONCTIONNEMENT ................................................................................
- Zone autorisée
- Zone de déclenchement
- Contrôleur
- Collier sans fil Havahart®
POUR COMMENCER .......................................................................................................................................................
- Planification de la limite de votre clôture sans fil
- Liste de vérification rapide
FACTEURS AYANT UNE INCIDENCE SUR LA PUISSANCE DU SIGNAL ....................................................................
INSTALLER LA CLÔTURE CIRCULARE SANS FIL DE HAUTE GAMME POUR CHIEN DE HAVAHART®.............
Configurer le contrôleur .............................................................................................................................
- Installation et activation du contrôleur
Configurer le collier .....................................................................................................................................
- Installer une pile
- Recharger une pile
- Activer un collier
- Régler le niveau de correction d’un collier
- Activation/Désactivation d’un collier
- Suppression d’un collier
- Vérifier l’état de la pile
Régler la limite de la clôture et de la zone de déclenchement .......................................................
- Établir la distance de la limite de la clôture et de la zone de déclenchement
- Mise en place des drapeaux de dressage
- Activation/Désactivation de la zone de déclenchement
- Options d’affichage
(Affichage de la distance au chien et État de la pile, Activation/Désactivation de l’affichage, Options de réglage
de l’alarme)
Ajuster un collier ...........................................................................................................................................
DRESSER VOTRE CHIEN ..................................................................................................................................................
DÉPANNAGE ......................................................................................................................................................................
CONDITIONS D’UTILISATION ET LIMITATIONS DE RESPONSABILITÉ ..................................................................
INFORMATION SUR LA GARANTIE ...............................................................................................................................
1
2
3
4
Bienvenue
http://www.HavahartWireless.com 1-800-800-1819, option 453
3
4
5
7
REMARQUE : Afin d’assurer votre
satisfaction totale et la sécurité de votre
chien, veuillez lire et suivre attentivement
toutes ces instructions. Notre service à
la clientèle est voué à vous aider dans
l’utilisation de nos produits. Composez le 1
800 800-1819, option 453.
Enregistrez votre clôture sans fil
Havahart à l’adresse www.Havahart.com/
customerservice/product-registration pour
ACTIVER VOTRE GARANTIE.
Merci d’avoir acheté la clôture circulare
sans fil de haute gamme pour chien de
Havahart®Wireless!
MESSAGE IMPORTANT
Il est essentiel de dresser correctement votre chien pour assurer le succès de l’utilisation de votre
clôture sans fil pour chien. Après avoir configuré votre clôture sans fil pour chien, consultez la
section relative au dressage dans le présent manuel.
LA CONFIGURATION DU SYSTÈME PREND 1 HEURE EN MOYENNE
1
Félicitations et merci d’avoir choisi la clôture circulare sans fil de haute gamme pour chien de
Havahart®- le chef de file novateur des solutions de clôture numérique sans fil.
D’une technologie révolutionnaire, la nouvelle clôture circulare sans fil de haute gamme pour chien
est conçue non seulement pour assurer une liberté et une sécurité maximales à votre chien, mais
également à vous procurer la tranquillité d’esprit avec un effort et un investissement minimes et très
peu d’impact sur votre propriété. Intégrant les plus récentes innovations de l’industrie, le système
d’enclos sans fil pour chien offre une zone autorisée qui peut être agrandie de 12 m à 122 m (40 à 400
pieds) par la simple pression d’un bouton. Il s’agit de la zone enclose la plus grande fournit par une
clôture sans fil.
La technologie de la clôture circulare sans fil de haute gamme améliore la communication numérique
grâce un réglage de précision entre le contrôleur du système et le collier. Le collier comprend un
couvercle de logement de pile affleurant pour un verrouillage plus sûr de la pile. La sangle du collier est
fabriquée en nylon épais avec fermeture à boucle à pression. Le collier est offert en longueurs de 35,6
à 66 cm (14 à 26 po). Pour les propriétaires de petits chiens désireux d’utiliser le modèle de clôture de
choix de forme radiale, le collier est d’une longueur de 30,5 à 44 cm (12 à 17 po) avec un logement de
pile de même dimension que les colliers habituels.
Nul besoin d’enfouir des fils et aucun risque de se faire mal au dos en creusant – une configuration
simple et rapide suffit pour donner à votre chien un plus grand espace de liberté!
!
8
9
9
11
14
17
19
26
29
30

Pour assurer le fonctionnement efficace et sécuritaire de votre clôture circulare sans fil de haute gamme pour chien, veuillez lire et
suivre toutes les consignes de sécurité et instructions :
•La clôture circulare sans fil de haute gamme pour chien est conçue pour les chiens de plus de 6 mois et qui pèsent
plus de 3,7 kg (8 lb).
•Le contrôleur doit être installé à l’intérieur et ne doit pas être exposé à l’humidité.
• Le contrôleur doit être branché dans une prise c.a. de 120 V c.a. correctement mise à la terre.
• Les modifications apportées à un quelconque composant du système peuvent endommager définitivement
celui-ci et annuler les garanties du fabricant.
• Afin d’éviter tout endommagement du système dû à des surtensions électriques imprévues, il est recommandé
de débrancher le contrôleur de la prise murale pendant les orages. Tous les paramètres seront conservés dans la
mémoire du système.
De plus, n’essayez pas d’installer le système par temps orageux.
• Pour éviter les irritations de la peau et prolonger la durée de la pile, ne laissez pas votre chien porter le collier
pendant plus de 12 heures consécutives.
• Retirez toujours le collier du cou de votre chien avant de procéder à un quelconque réglage des composants
ou des paramètres du système.
• Le système est destiné à assurer un enclos sécuritaire à votre chien. Tous les composants doivent être tenus hors
de la portée des enfants.
• Conformez-vous aux lois de tenue en laisse des chiens. Il se pourrait que ce système soit légalement interdit dans
certains cas.
• Il est essentiel de dresser correctement votre chien pour assurer la sécurité et le succès de l’utilisation de votre
clôture sans fil pour chien.
Contrôleur
Cordon d’alimentation de l’adaptateur c.a.
Bandes adhésives murales amovibles
Vis et dispositifs d’ancrage mural
Collier
2 piles RCR123 pour collier et chargeur de piles
Autres articles qui pourraient :
•Ciseaux
•Ruban à mesurer
•Tournevis
Testeur de collier en forme de cœur
Ensemble supplémentaire de capteurs de collier pour
chiens à poils court
75 drapeaux de dressage
DVD d’instructions
Manuel d’instructions
Guide de configuration rapide
Composants du systèmeRappels de sécurité importants
Composants du système
Rappels de sécurité importants
3 4
A
H
B
I
C
D
E
F
G
http://www.HavahartWireless.com
NE RETOURNEZ PAS LE PRODUIT AU MAGASIN
POUR QUELQUE RAISON QUE CE SOIT.
COMMUNIQUEZ DIRECTEMENT AVEC HAVAHART®WIRELESS!
COMPOSEZ LE 1 800 800-1819, OPTION 453.
1-800-800-1819, option 453
•Marqueur permanent
•Alcool isopropylique à friction
•Chiffon doux
J
A
B
C
D
E
F
H
I
Assurez-vous que les composants suivants sont
inclus avec votre système. Si un composant est
manquant, veuillez composer le 1 800 800-1819,
option 453.
G

Controller
Fence Radius
Antennes
Écran ACL
Bouton Marche
Antennes intégrées
Voyant du collier
Logement de la pile
Couvercle du logement de
la pile
Capteurs
Rondelles
Boutons Haut, Entrée et Bas
Connexion au courant continu
Définitions clés :
Zone autorisée : Zone située entre le contrôleur et la zone de déclenchement et dans laquelle votre chien est libre de jouer. Le rayon
de clôture peut être agrandi de 12 m à 122 m (40 pieds à 400 pieds).
Zone de déclenchement : Cette zone, qui peut être de 0,9 m à 1,8 m (3 à 6 pieds)
de large, est située sur le bord de la zone autorisée. Le collier appliquera la correction
à un point situé dans cette zone. Une fois reliés, ces points créent la limite de votre
clôture. La correction est déclenchée lorsque votre chien pénètre dans la zone de
déclenchement et peut être réglée à Tonalité seulement (alarme sonore) ou à
Correction statique. L’endroit où la correction est appliquée dépend de la vitesse
à laquelle votre chien pénètre dans la zone de déclenchement.
Contrôleur : Les alertes sonores et l’écran ACL autorisent
la navigation intuitive pour configurer, activer et gérer votre
clôture. Le contrôleur, qui renferme un émetteur-récepteur
de pointe de la technologie, affiche en temps réel la
distance à laquelle se trouve votre chien. Il vous
avertira si votre chien franchit la limite de la
clôture, ou si la charge de la pile du collier est f
aible. Le contrôleur peut prendre en charge
jusqu’à 2 colliers.
Collier sans fil Havahart®: Le collier
renferme une pile rechargeable RCR123,
deux capteurs de correction et un
émetteur-récepteur radio de pointe
muni d’un ensemble d’antenne
sophistiqué. Le collier communique en
permanence avec le contrôleur pour
assurer le suivi de l’endroit où se trouve votre
chien. Le collier peut être configuré à Tonalité
seulement (correction sonore) ou à l’un des 5
différents niveaux de correction statique. Le niveau
de correction par défaut est Tonalité seulement. Utilisez
les capteurs longs ou courts en fonction de l’épaisseur des
poils de votre chien. Le collier sans fil Havahart®utilise la
technologie de détecteur de mouvement, qui permet au collier
de se mettre en veille en l’absence de mouvement, afin de préserver et d’optimiser la durée de vie de la pile.
Technologie utilisée par le système :
La clôture circulare sans fil de haute gamme pour chien de Havahart®fonctionne au moyen de deux émetteurs-récepteurs nanoLOC
TRX de 2,4 GHz qui ont été améliorés par de complexes algorithmes, des filtres de distorsion stratégique et une amplification
modulaire des signaux pour offrir une technologie de mesure de distance en temps de vol. Grâce à ces améliorations, la clôture
circulare sans fil de haute gamme pour chien Havahart®offre un degré de sophistication technique inégalé dans l’industrie des
clôtures sans fil pour chien.
Comment cela fonctionne :
Le collier sans fil et le contrôleur Havahart®contiennent un jeu de puces d’émetteur-récepteur nanoLOC TRX 2,4 GHz. Ces
puces envoient et reçoivent les transmissions radio à partir de leur paire d’antennes respective, de la même façon qu’un appareil
radio bidirectionnel. Lorsque les signaux radio sont envoyés depuis les antennes d’un composant, ils se propagent d’une façon
omnidirectionnelle ou sphérique. Le processus de mesure de distance saisit, filtre et précise en permanence les données qui
fournissent la distance entre le collier sans fil et le contrôleur Havahart®.
Cela permet au système de suivre l’endroit où se trouve votre chien. Lorsque l’extrémité du rayon de clôture défini par l’utilisateur
est atteinte à l’intérieur de la zone de déclenchement, le contrôleur envoie une commande au collier pour qu’il prenne une action et
applique la correction (tonalité ou statique – en fonction des paramètres définis par l’utilisateur). La correction n’est pas constante,
mais cyclique. Le collier corrigera votre chien jusqu’à ce qu’une des deux conditions suivantes soit établie :
1. Votre chien revient dans la zone autorisée. Le système revient à son mode de fonctionnement normal.
2. La fonction Interruption de sécurité du collier arrête le cycle de correction après 30 secondes. Après l’interruption du cycle de
correction, votre chien ne sera PAS corrigé pour revenir dans la zone autorisée. Le collier retourne au mode de fonctionnement
normal uniquement lorsque votre chien revient dans la zone autorisée. Ensuite, le contrôleur n’envoie aucune autre commande
de correction jusqu’à ce que votre chien revienne dans la zone de déclenchement.
Définitions clés, technologie et fonctionnement
Définitions clés, technologie et fonctionnement
5
Définitions clés, technologie et fonctionnement
6
http://www.HavahartWireless.com
A
A
B
B
C
C
D
D
E
E
D
E
F
A
B
C
Fonctions du contrôleur : Caractéristiques du collier :
1-800-800-1819, option 453
BC
E
F
D
AA
R
O
AMING ARE
A
Recorded FenceBoundar y
CORRECTION ANYWHERE IN THIS
6’ TRIGGER ZONE IS ACCEPTABLE
+/- 3’
+/- 3’
Définitions clés, technologie et fonctionnement