Havis DS-PAN-900 Series User manual

Owner’s Manual
Havis Docking Station
For Panasonic Toughpads FZ-M1 & FZ-B2
www.havis.com
1-800-524-9900
DS-PAN-901
DS-PAN-901-2
DS-PAN-902
DS-PAN-902-2
DS-PAN-903
DS-PAN-905
DS-PAN-905-2
DS-PAN-906
DS-PAN-906-2
DS-PAN-900 Series

DS-PAN-901
DS-PAN-901-2
DS-PAN-902
DS-PAN-902-2
DS-PAN-903*
DS-PAN-905*
DS-PAN-905-2*
DS-PAN-906*
DS-PAN-906-2*
Before Beginning (Original Instructions)
2
Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-PAN-900 Series Docking Station for
the Panasonic Toughpads FZ-M1 and FZ-B2.
For questions regarding the set-up of your DS-PAN-900 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.
This Owner’s Manual applies to the following Part Numbers:
*Toughpad FZ-B2 is only compatible with DS-PAN-903, DS-PAN-905, DS-PAN-905-2, DS-PAN-906,
& DS-PAN-906-2 Docking Stations
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.
• NE JAMAIS RANGER OU MONTER LA STATION D’ACCUEIL DIRECTEMENT DANS UNE ZONE DE
DÉPLOIEMENT D’AIRBAG D’UN VÉHICULE.
• DO NOT USE COMPUTER WHILE DRIVING.
• N’UTILISEZ PAS D’ORDINATEUR PENDANT LA CONDUITE.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• LISEZ ATTENTIVEMENT TOUTES LES INSTRUCTIONS AVANT DE COMMENCER L’INSTALLATION.
• ONLY TABLETS WITH RF PASS-THRU WILL LATCH INTO DOCKING STATIONS EQUIPPED WITH AN ANTENNA MODULE
(DS-PAN-901-2, DS-PAN-902-2, DS-PAN-905-2, and DS-PAN-906-2). ATTEMPTING TO LATCH A TABLET WITH NON-RF
PASS-THRU MAY RESULT IN DAMAGE TO THE TABLET AND/OR DOCKING STATION.
• SEULES LES TABLETTES ÉQUIPÉES D’UNE RF PASS-THRU PEUVENT ÊTRE FIXÉES AUX STATIONS D’ACCUEIL ÉQUIPÉES
D’UN MODULE D’ANTENNE (DS-PAN-901-2, DS-PAN-902-2, DS-PAN-905-2, et DS-PAN-906-2). SI VOUS ESSAYEZ DE
FIXER UNE TABLETTE ÉQUIPÉE D’UN PASS-THRU NON-RF, VOUS RISQUEZ D’ENDOMMAGER LA TABLETTE ET/OU LA
STATION D’ACCUEIL.
• FOR THE DS-PAN-901, DS-PAN-901-2, DS-PAN-902, DS-PAN-902-2, DS-PAN-905, DS-PAN-905-2, DS-PAN-906 AND
DS-PAN-906-2 DOCKING STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product
requires a certied, automotive grade, Panasonic approved 24W power source rated for a continuous, 15VDC
output (ES1/PS2). Failure to comply with this requirement will cause product
damage that is NOT repairable and is NOT covered under warranty.
• POUR LES STATIONS D’ACCUEIL DS-PAN-901, DS-PAN-901-2, DS-PAN-902, DS-PAN-902-2, DS-PAN-905, DS-PAN-905-2,
DS-PAN-906 ET DS-PAN-906-2: NE PAS CONNECTER DIRECTEMENT À LA SOURCE DE TENSION DU VÉHICULE : Ce produit
nécessite une source d’alimentation 24 W certiée de qualité automobile et approuvée par Panasonic, conçue pour
une sortie continue de 15 V CC (ES1/PS2). Le non-respect de cette exigence entraînera
des dommages au produit qui ne sont PAS réparables et qui ne sont PAS couverts par la garantie.
• FOR THE DS-PAN-903 DOCKING STATION:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The Panasonic FZ-M1 & FZ-B2 tablets require a
certied, Panasonic approved power source rated for a continuous, regulated 15VDC output. Failure to comply
with thisrequirement will cause product damage that is NOT repairable and is NOT covered under warranty.
• POUR LA STATION D’ACCUEIL DS-PAN-903 :
NE PAS CONNECTER DIRECTEMENT À LA SOURCE DE TENSION DU VÉHICULE : Les tablettes Panasonic FZ-M1 et FZ-B2
nécessitent une source d’alimentation certiée et approuvée par Panasonic, conçue pour une sortie continue et
régulée de 15 V CC. Le non-respect de cette exigence entraînera des dommages au produit qui ne sont PAS réparables
et qui ne sont PAS couverts par la garantie.
• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN
0°C to 50°C (32°F to 122°F).
PLEASE REFER TO PANASONIC TOUGHPAD FZ-M1 & FZ-B2 OWNER’S MANUAL FOR
MORE INFORMATION.

Table of Contents
3
Specications
Parts Included
Port Replication Capability
Antenna Identication
Installation
Cable Management
Operation - Docking
Operation - Undocking
• Do not place metal objects or containers of liquid on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet
• Use only a certied ES1/PS2 Power Supply with 15VDC output for this Docking Station
• Do not store the Docking Station where water, moisture, steam, dust, etc. are present
• Do not connect cables into ports other than what they are specied for
• Do not leave the Docking Station in a high temperature environment (greater than 60°C, 140°F)
for a long period of time
• Do not connect cables to the DC Power Port or Ethernet Port exceeding 3 meters in length.
Precautions
EC DECLARATION OF CONFORMITY in accordance with EN 45014
Manufacturers Name: Havis, Inc.
Manufacturers Address: 47801 Anchor Court, Plymouth Twp, MI 48170 USA
Declares under our sole responsibility that the product:
Product name: Havis Docking Station For Panasonic Toughpad FZ-M1 & FZ-B2
Model: DS-PAN-90X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment -
Radio disturbance characteristics - Limits and methods of measurement
EN 55024:2010, Information technology equipment - Immunity characteristics -
Limits and methods of measurement
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
BS EN 50498:2010: Section 7, after market electronic equipment in vehicles.
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires the
use of the provided e-Marked automotive power supply when used within vehicles.
Plymouth twp, MI, USA February 23, 2015 Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-PAN-90X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
Specications
Power Supply Input Certied ES1/PS2 Power Supply with 15VDC Output
Dimensions 7.9” ( 20.1 cm) H x 8.6” ( 21.8 cm ) W x 3.0” ( 7.6 cm ) D
Weight 1.6 lbs ( 0.73 kg )
Operating Environment -10° C to 35° C ( 14° F to 95°F )
Storage Environment -40° C to 85° C ( -40° F to 185° F )

4
Hardware Kit
Docking Station
This Hardware Kit includes:
1. Zip Ties (6)
2. Keys (2)
3. M4 x 0.7 x 12mm long
Pan Head Screws (5)
4. Washers, M4 (5)
5. Lock Washers, M4 (5)
Extra hardware provided
Tools required for installation:
Parts Included
Barrel Lock
Ground Pins
Latch Handle
Docking Connector
Strain Relief Anchor Points
Latch Tab
Alignment Posts
(Hidden from view
in this illustration)
Ports
Mounting Holes (x4)
(VESA 75mm Hole Pattern)
• #2 Philips Screwdriver
(For attaching Docking Station to VESA 75mm hole pattern
equipment with Pan Head M4 x 0.7 x 12mm Screws)

www.havis.com • 1-800-524-9900 5
Port Replication Capability
Full Port Replication for use with Toughpad FZ-M1
(DS-PAN-901, DS-PAN-901-2, DS-PAN-902, DS-PAN-902-2)
USB 3.0 (x2)
Ethernet (RJ45)
HDMI
VGA
Serial
Antennas
DS-PAN-901-2
DS-PAN-902-2
(optional)
Antenna
Selection
Switches
Power Input
Internal/External
Antenna Selection
Switches
Power Input
USB 3.0 (x2)
Ethernet (RJ45)
Antennas
DS-PAN-905-2
DS-PAN-906-2
(optional)
Lite Port Replication for use with Toughpads FZ-M1 & FZ-B2
(DS-PAN-905, DS-PAN-905-2, DS-PAN-906, DS-PAN-906-2)
Antenna Identication (DS-PAN-901-2, DS-PAN-902-2, DS-PAN-905-2, DS-PAN-906-2)
In reference to the Panasonic FZ-M1 Antenna connections
ANT A = Lower
ANT B = Upper
Downward Facing Antennas Tablet Interface

6
Installation
1) Align Docking Station mounting holes with the holes on VESA 75mm
hole pattern device. Using the four (4) M4 x 0.7x12mm Pan Head Screws
(Hardware Kit Item 3), four (4) Washers, M4 (Hardware Kit Item 4), and four (4)
Lock Washers, M4 (Hardware Kit Item 5), secure the Docking Station to device.
Torque screws to 20 in-lbs (2.3Nm) ± 10%.
A) Havis Desktop Stand installation (sold seperately, Part # DS-DA-218).
B) In-Vehicle mounting system installation.
Desktop Stand
(VESA 75 mm)
M4 x 0.7x12mm
Pan Head Screws
Lock Washer, M4
Washer, M4
Washer, M4
M4 x 0.7x12mm
Pan Head Screws
Lock Washer, M4

www.havis.com • 1-800-524-9900 7
This loop must be large enough
to allow full range of expected
rotation and extension without
stressing connections.
Collect cables and secure
to the mounting system.
(Note: Mounting system not included)
Cable Management
1) Tip the Docking Station to a position that is comfortable to work with.
2) Connect all cables that are necessary for computing needs.
3) Use Zip Ties (Hardware Kit Item 1) to strain relieve cables. Strain Relief Points
are located on the bottom and sides of Docking Station and should be used
to anchor each cable.
4) Create a service loop with cables to ensure that no tension is on the
connectors and to enable intended motion.
5) Tie off cables onto a stationary part of the mounting system.

8
Operation - Docking
DO NOT FORCE TABLET ONTO DOCKING STATION.
IF THERE IS RESISTANCE, CHECK THAT YOUR TABLET IS CORRECTLY CONFIGURED FOR THE DOCKING STATION
NE FORCEZ PAS LA TABLETTE SUR LA STATION D’ACCUEIL.
EN CAS DE RÉSISTANCE, VÉRIFIEZ SI VOTRE TABLETTE EST CORRECTEMENT CONFIGURÉE POUR LA STATION
D’ACCUEIL
TO ENSURE A PROPER CONNECTION, PLEASE READ THE FOLLOWING BEFORE DOCKING YOUR TABLET.
POUR VOUS ASSURER D’UN BRANCHEMENT CORRECT, VEUILLEZ LIRE CE QUI SUIT AVANT DE FIXER
VOTRE TABLETTE À LA STATION D’ACCEUIL.
ONLY TABLETS WITH RF PASS-THRU WILL LATCH INTO DOCKING STATIONS EQUIPPED WITH AN ANTENNA MODULE
(DS-PAN-901-2, DS-PAN-902-2, DS-PAN-905-2, and DS-PAN-906-2).
ATTEMPTING TO LATCH A TABLET WITH NON-RF PASS-THRU MAY RESULT IN DAMAGE TO THE TABLET AND/OR
DOCKING STATION.
SEULES LES TABLETTES À RF PASS-THRU POURRONT ÊTRE FIXÉES AUX STATIONS D’ACCUEIL ÉQUIPÉES D’UN
MODULE D’ANTENNE
(DS-PAN-901-2, DS-PAN-902-2, DS-PAN-905-2, et DS-PAN-906-2).
SI VOUS ESSAYEZ DE FIXER UNE TABLETTE ÉQUIPÉE D’UN PASS-THRU NON-RF, VOUS RISQUEZ D’ENDOMMAGER
LA TABLETTE ET/OU LA STATION D’ACCUEIL.
Example of a Docking Station equipped
with an Antenna Module.
1) Ensure Docking Station is unlatched by lifting Latch Handle.
Example of a Tablet without RF Pass-Thru.
DO NOT attempt to latch onto a Docking
Station equipped with an Antenna Module.

www.havis.com • 1-800-524-9900 9
Operation - Docking
2) Hold tablet in landscape orientation, with bottom angled toward the
Docking Station. Lower tablet into the bottom of the Docking Station
while ensuring that the alignment sockets are aligned with the Docking
Station’s Alignment Posts.
3) Pivot tablet into the Docking Station and lower the Latch Handle to secure
tablet in place.
Latch Tab will engage in front of
your Toughpad FZ-M1
If there is excessive force while
lowering the Latch Handle, check
orientation and position of tablet

10
Operation - Docking (continued)
Operation - Undocking
1) If previously locked, unlock Docking Station using supplied key.
2) While holding tablet with one hand, lift the Latch Handle on the top
of Docking Station.
3) Once unlatched grab both sides of tablet, rock the top forward and carefully
lift out of Docking Station, top end rst.
4) For theft deterrence, secure tablet by locking Docking Station with
supplied key (Hardware Kit Item 2).

www.havis.com • 1-800-524-9900 11
Related Products
Havis offers a wide variety of accessory products specically for use
with the DS-PAN-900 Series Docking Station. For more information or
to order, please visit www.havis.com.
DS-DA-218
Desktop Stand for Tablet Docking Stations
Durable stand for mounting tablet Docking Stations
for use in the home or office.
DS-DA-501
Replacement Keys
Set of two (2) replacement keys for DS-PAN-900
Series Docking Stations.
DS-DA-602
Rugged Communications Hub
Rugged USB/Ethernet hub makes adding peripherals to
your mobile workspace easy and safe.

DS-PAN-900-SERIES_OMN_7-21
Havis, Inc.
75 Jacksonville Road
Warminster, PA 18974
www.havis.com 1-800-524-9900