Hay ARBOUR ECO Installation instructions

– DISASSEMBLY INSTRUCTION MANUAL –
D I SAS S E M B LY

 RECYCLING & DISASSEMBLY 
All the furniture in this instruction manual is
ecolabelled and designed to be long-lasting products
made to endure years to come. The furniture is
100% recyclable and parts can be fully separated
and recycled. All parts can be delivered to a suitable
recycling facility.

 TABLE OF CONTENTS 
ARBOUR ECO
AAC 12 ECO
AAC 22 ECO
AAS 32 ECO
CPH 10
CPH 25
CPH 30
CPH 30 EXTENDABLE
CPH 90
CPH 190
CPH DEUX 210
CPH DEUX 215
CPH DEUX 220
CPH DEUX 250
RESULT CHAIR
REVOLT CHAIR
SOFT EDGE 10 CHAIR
SOFT EDGE 10 BAR STOOL
SOFT EDGE 10 SLED
SOFT EDGE 10 LOUNGE
67
8
9
10
11
12
13
14
15
16
17
18
19
20
2122
23
2425
2627
2829
3031

 TABLE OF CONTENTS 
SOFT EDGE 12 CHAIR
SOFT EDGE 30 BAR STOOL
SOFT EDGE 32 BAR STOOL
SOFT EDGE 70 STOOL
SOFT EDGE 72 STOOL
TRIANGLE LEG TABLE
TRIANGLE LEG BENCH
3233
34
35
36
37
38
39

6
 ARBOUR ECO 
1. Remove the cushions.
2. Turn the sofa upside down and separate the base from
the frame by unscrewing all the screws
Cushion cover - EU_Ecolabelled fabrics
Cushion filling - Feathers, polyurethane foam
Bolts, nuts and washers - Steel

7
 ARBOUR ECO 
Frame - Wood
Reinforcement bar - Steel
Screws - Steel
Reinforcement bar - Wood
Webbing - Polyester
3. Remove the webbing base by lifting it up.
4. Unscrew all the screws to remove the steel profile
and the wood profile from the frame.

8
 AAC 12 ECO 
1. Turn the chair upside down.
2. Remove all the bushings from the bottom of the seat.
3. Remove the gliders from the legs.
4. Separate the base from the seat.
 AAC 22 ECO 
Shell - Mix of
recycled and virgin
polypropylene
Legs - Solid oak
Gliders - Polyethylene
Fittings - Steel

9
 AAC 22 ECO 
Shell - Mix of
recycled and virgin
polypropylene
Legs - Beech plywood
Gliders - Polyethylene
Fittings - Steel
Legs - Oak veneer
1. Turn the chair upside down.
2. Remove all the bushings from the bottom of the seat.
3. Remove the gliders from the legs.
4. Separate the base from the seat.

10
 AAS 32 ECO 
1. Turn the chair upside down.
2. Remove all the bushings from the bottom of the seat.
3. Remove the gliders and the footrest from the legs.
4. Separate the base from the seat.
 CPH 10 
Shell - Mix of
recycled and virgin
polypropylene
Legs - Beech plywood
Gliders - polyethylene
Fittings - Steel
Legs - Oak veneer
Footrest - Stainless steel

11
 CPH 10 
1. Turn the table upside down
2. Unscrew all the screws holding the legs and crossbar.
3. Separate the reinforcement bar from the crossbar by unscrewing the screws.
4. Unscrew the gliders from the legs.
Screws - Steel
Gliders - Steel/PA
Reinforcement bar - Steel
Legs - Wood
Crossbar - Wood
Tabletop - Wood

12
 CPH 25 
1. Turn the table upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Unscrew the gliders from the legs.
Reinforcement bar - Steel
Crossbars - Wood
Tabletop - Wood
Legs - Wood
Screws - Steel
Brackets - Steel
Gliders - Steel/PA

13
 CPH 30 
1. Turn the table upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Separate the reinforcement bar from the crossbar by unscrewing the screws.
4. Unscrew the gliders from the legs.
Reinforcement bar - Steel
Crossbar - Wood
Tabletop - Wood
Legs - Wood
Screws - Steel
Brackets - Steel
Gliders - Steel/PA

14
 CPH 30 EXTENDABLE 
1. Turn the table upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Separate the reinforcement bar from the crossbar by unscrewing the screws.
4. Unscrew the gliders from the legs.
Gliders - Steel/PA
Crossbars - Wood
Legs - Wood
Screws - Steel
Slide mechanisms - Aluminium
Tabletop - Wood

15
 CPH 90 
1. Turn the table upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Unscrew the gliders from the legs.
Screws - Steel
Gliders - Steel/PA
Legs - Wood
Crossbar - Wood
Tabletop - Wood

16
 CPH 190 
1. Turn the table upside down.
2. Unscrew the gliders from the legs.
Gliders - Steel/PA
Legs, tabletop - Wood

17
 CPH DEUX 210 
1. Turn the table upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Unscrew the gliders from the legs.
Screws - Steel
Gliders - Steel/PA
Legs - Wood
Crossbar - Wood
Tabletop - Wood

18
 CPH DEUX 215 
1. Turn the bench upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Unscrew the gliders from the legs.
Screws - Steel
Legs - Wood
Crossbar - Wood
Benchtop - Wood

19
 CPH DEUX 220 
1. Turn the bench upside down.
2. Unscrew all the screws holding the legs and crossbar.
3. Unscrew the gliders from the legs.
Screws - Steel
Gliders - Steel/PA
Legs - Wood
Tabletop - Wood

20
 CPH DEUX 250 
1. Turn the table upside down.
2. Unscrew all the screws holding the legs and crossbar.
 RESULT CHAIR 
Legs - Wood
Screws - Steel
Crossbar - Wood
Tabletop - Wood

21
 RESULT CHAIR 
1. Hold the seat and backrest while unscrewing the rivets,
using a power drill with a 10mm bit.
2. Remove the bumpers from the backrest posts and the gliders from the legs.
Backrest - Veneer
Seat - Veneer
Rivets - Aluminium
Gliders - LLDPE
Ø10mØ10mmm
Ø10mØ10mmm
Bumpers - TPE