Suncast MBR3420 User manual

BR342O
STORAGE TRENDS METAL BASKET RACK
AJ Right Side Panel Left Side Panel Top Panel Bottom Tube, Front DJ Bottom Tube
with holes, Rear
0630033 1 PC 0630034 1 PC 0630035 1 PC 0630036 1 PC 0630037 1 PC
4" Basket F] 9" Basket G] Rear Gusset Adjustable Foot !] Truss Head
#8-18 x 1/2"
(5132-16x5116')
0630038 3 cs 0630039 1 P 0630005 2 cs 0630006 4 Pcs 0630022 4 cs
0630007 8 cs 0630021 8 cs 0630009 1 P
2003 Suncast Corporation Patents Pending 0660006
OWNER'S MANUAL
IMPORTANT:
Follow instructions listed below to assure fast, easy and correct
assembly. This product contains parts that can be damaged if
incorrectly assembled
Before assembling, please count your parts and hardware as
listed below.
Do not fully tighten screws until the product is fully assembled.
REPLACEMENT PARTS ORDERING INSTRUCTIONS:
Call Suncast for pricing information. Call 800-846-2345 or 630-879-
2050. Monday-Friday 8:00am-4:30pm Central Time (except holidays).
Or see www.suncast.com
fl Button Head
1/4'-20x1 1/4" Truss Head 5/32" Wrench
#10- 24 x 1/2"
(3/16-24 x 1/2') For
Information on
icast products
replacement parts see
www.suncast.com

1. Fasten Right Panel (AR) to Top Panel (B), by
using screw (J). Make sure logo on Top Panel is
facing up and make sure holes for Rear Gusset
on Right Panel are on back side of unit. Fasten
Top Panel (B) to Left and Right Panel (AL) &
(AR) by using screw (I).
2. Fasten Left Panel (AL) to Top Panel (B) by
using the screw (J). Make sure holes for Rear
Gusset on Left Panel are on back side of unit.
3. Fasten Square Tube with holes (D) to both
panels, making sure the holes in the tube are
facing the back of the unit, using the (J) screw.
Fasten Square Tube (C) to both panels using the
(J) screw.
4. Attach the Rear Gusset (G) on the back of
the basket holder, using (K) screw as shown.
5. Screw Feet H into holes on legs of unit.
Adjust as necessary to level unit.
6. Place the 4" Baskets and 9" Basket into the E
holder as shown. E
E
J
J
AL
B
JJ
AR
Front of unit J
J
FH
0660006