Coalesse Archipelago Use and care manual

Page 1 of 3
939501989 Rev A
If you have a problem, question, or request, call
your local dealer, or Coalesse at 1.800.627.6770
Or visit our website: www.coalesse.com
©2010 Coalesse
San Francisco, California U.S.A.
Printed in U.S.A.
Archipelago®- Seat Replacement
Staples 3/8"
HEX 4MM
PH2 & PH3
Remove Staples
HEX 4MM: for assembly screws 1/34"
PH2: for assembly screws 6/8" and 7/8”
PH3: for assembly screws 2-1/2"
and Casters
1. Remove all glides or casters.
2. Remove the screws in the arms (4) in both sides.
3. Remove the staples holding the black fabric.

Page 2 of 3
939501989 Rev A
4. Remove (3) screws.
5. Remove the staples.
6. Remove (2) screws.
7. If a bracket is present, remove
one screw in each side.
8. Position the new seat.
9. Align seat with base
(sides and back).
10. Install (2) screws
(approximately 2-1/2”).

Page 3 of 3
939501989 Rev A
11. Pull fabric to eliminate wrinkles
on seat.
12. Use staples to snug fabric.
13. Use staples to snug fabric.
14. Insert (3) screws
(approximately 7/8”).
1"
1"
15. Insert (2) screws
(approximately 3/4”).
16. Install black fabric.
17. Insert (4) screws
(approximately 1-3/4”).
18. Assemble (4) casters or
glides with (4) screws
(approximately 1-3/4”)
on both sides.
19. For caster position, use 1”
between end and metal
base of caster.