Health Care International PTX Gym User manual

HealthCare International, Inc.
PO Box 1509, Langley, WA 98260
www.HciFitness.com –[email protected]
P: [phone] or [phone]

1
Table of Contents
Safety Precautions................................................................................................................2
Pre-Assembly Note...............................................................................................................3
Assembly Instructions...........................................................................................................4
Storing the PTX Gym..........................................................................................................11
Exercise Poster...................................................................................................................13
Exploded Diagram ..............................................................................................................14
Parts List.............................................................................................................................15

2
Safety Precautions
This product was designed and built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before assembly and operation of this table.
Also, please note the following safety precautions:
Expand and Lock the Front and Rear Stabilizers on the PTX Gym before
use. Check that the Stabilizers and Safety Latch are secure before each
use of the PTX Gym
.
1. Read all instructions carefully before using the table.
2. Consult your physician or other health care professional before beginning this or any
type of exercise program.
3. Always wear proper exercise apparel when using the table.
4. If at any time you feel faint, light-headed, or dizzy while operating the table, stop exercise
immediately. You should also stop exercising if you are experiencing pain or pressure.
5. Keep children and pets away from the table while in use.
6. Only one person can use the machine at a time.
7. Make sure your table is correctly assembled before you use it. Be sure all screws, nuts,
and bolts are tightened prior to use and retighten periodically.
8. Do not operate this or any exercise equipment if it is damaged.
9. Keep hands and feet away from any moving parts. Do not insert any objects into any
openings.
10.Keep clothes, jewelry, or loose items away from moving parts.
Please note:
Maximum weight limit for the PTX Gym is 242 lbs (110 kg)
WARNING
BEFORE BEGINNING ANY EXERCISE, PROGRAM CONSULT YOUR PHYSICIAN. THIS
IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PEOPLE
WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE
USING THIS FITNESS EQUIPMENT. WE ASSUME NO RESPONSIBILITY FOR
PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE

3
USE OF THIS PRODUCT.
HCI Fitness PTX Gym–Folding Home Gym
Thank you for your purchase of the PTX Folding Home Gym from HCI Fitness.
We believe that you have purchased one of the highest quality and most
affordable Folding Home Gym on the market today. Prior to using your new
PTX Folding Home Gym please review the operator’s manual and product tips
to maximize your workout experience.
HealthCare International is a leading supplier and distributor of innovative products for Health,
Wellness, Fitness & Active Aging. Visit our website –www.HCIFitness.com for information
on all of our products.
Pre-Assembly Note
Before you start to assemble this unit, please note that some of the parts and
screws needed for assembly are already in place on the unit.
If you need assistance during assembly or any parts are missing, please call us
at 206-739-5400 or email us at [e-mail].

4
Assembly Instructions
Be sure that the area is clear before assembling the PTX Gym.
Only move the PTX Gym in the folded position with the top safety latch locked.
STEP 1:
Locate pin #1, pull down on the handle lever to release the safety latch on the
back of the Gym. (Reference item 1 and detail A)

5
STEP 2:
Slowly pull open each side of the PTX Gym until fully extended. (Reference
item 2)

6
Assembly Instructions
STEP 3:
After opening the PTX Gym, secure the top locking lever and make sure it is
locked in place. Make sure that the locking lever is secure before each use.
(Reference item 3 and detail B)
STEP 4:
Pull out the left rear stabilizer (4) from beneath the weight stack. Aligned the
holes and lock the pin in place. (5). (Reference item 4 and 5, and detail C)
STEP 5:
Loosen the left front knob in detail D and pull out the front slide stabilizer. Align
the hole with the knob and tighten the knob in place. (Reference item 7, 8 and
9)

7
Assembly Instructions
STEP 6:
Pull out the right rear stabilizer (10) from beneath the weight stack. Aligned the
holes and lock the pin in place. (11). (Reference item 10 and 11, and detail E)
STEP 7:
Loosen the right front knob and pull out the front slide stabilizer. Align the hole
with the knob and tighten the knob in place. (Reference item 12, 13, 15)

8
Assembly Instructions
STEP 8:
You can now add the removable weights to the weight stack. (Reference item
16 and 17)
Please note that the weights can be removed and used as dumbbells for
free weight training.
Each Weight is 10 lbs.

9
Assembly Instructions
STEP 9:
Insert the weight stack pin into the weight stack to select the desired weight.
(Reference item 18)
Caution: Be sure that the area is clear and to hold the bench
before unlocking the bench from the PTX Gym
STEP 10:
To lower the bench, hold the bench and then unlock the belt and put down the
bench support frame. (Reference item 19, item 20 and detail F)

10
Assembly Instructions
STEP 11:
To use the bench, unclip it from the stored position. As you bring it down,
extend the front support tube. (Reference step 10 on page 8, item 21)
STEP 12:
To adjust the bench, lift the seat back and secure the seat back support tube in
the desired position. (Reference item 22)
Congratulations your PTX Gym is now ready to use!
Be sure to check that all locking connections are made and secure before
each use.

11
Storing the PTX Gym
Be sure that the area is clear before folding the PTX Gym into the stored position.
STEP 1:
Fold the bench into the stored position. Lower the seat back into the flat
position then lift the bench and lock the bench in place. (Reference detail F)
STEP 2:
One side at a time release the locking pins for the leg stabilizers and move the
leg stabilizers back into the stored position under the PTX Gym.

12
STEP 3:
Release the top safety lock and fold the PTX Gym together. Relock the top
safety lock in detail A immediately after closing the PTX Gym.
Be sure that the top safety lock is in the locked position before moving
the PTX Gym

13
Exercise Poster

14
Exploded Diagram

15
Parts List
No
Description
Q’TY
No
Description
Q’TY
1
Middle Frame
1
31
63 Pulley
4
2
Right Frame (with Mesh)
1
33
Knob
4
3
Left Frame (with Mesh)
1
34
Plastic Wash 38X13
1
4
Bench Support Frame
1
35
3-8 teeth Nylon Nut
24
5
Height Adjustable Tube(Left)
1
36
Hexagonal bolt 38L
10
6
Height Adjustable Tube(Right)
1
37
Hexagonal bolt 35L
4
7
Wheel Moving Tube
2
38
Hexagonal bolt x55L
4
8
Bench Cushion Support Frame
1
39
Hexagonal bolt 70L
3
9
Bench Angle Adjust Support Frame
2
40
Hexagonal bolt x75L
3
10
Wheel U Screw
2
41
Inner hexagon bolt M8X45L
4
11
Weight Disc. Guide Pin
2
42
Nylon Nut M8
4
12
Moving wheel set
2
43
Oval End Cap 40X80
4
13
Guide Rod-1661L
2
44
Cross flat head screws M6X15L
6
14
Pull Pin Set
1
45
Cross flat head screws M6X40L
6
15
Hinge
1
46
Hexagonal bolt 140L
2
16
Folding Mounting Plate
1
47
Cross flat head screws M8X35L
2
17
Pull Pin
1
48
Nylon Nut M8
8
18
Short Handle Bar
1
49
Cross flat head screws M8X20L
5
19
Low Pull Set
1
50
Handle
2
20
Seat Cushion
1
51
Hook
2
21
Back Cushion
1
52
Knob
2
22
Cushion Stopper
4
53
Foot Pad
1
23
Weight Disc.
18
54
Screw M4X25
1
24
Copper Bushings
4
55
Nylon Nut M4
1
25
C Ring25.4
2
56
Screw M6X15L
1
26
Bench Support Frame
1
57
Wash 6X13X1T
1
27
Tube 50
2
58
Ball Cushion
2
28
Weight Disc. Top
2
59
Cable Stopper U
2
29A
90 Pulley
2
60
Screw for Cable
2
29B
90 Pulley
2
61
Male magic tap 50
1
29C
90 Pulley
2
62
Female magic tap 50
1
29D
90 Pulley
2
63
Insert part
4
29E
90 Pulley
2
64
End Cap 25X50
3
29F
90 Pulley
2
65
Ball head Pin
2
29G
90 Pulley
2
66
Hexagonal bolt M8x65L
1
30
Bushing
1
67
Hanger set-A
1

16
Parts List
No
Description
Q’TY
No
Description
Q’TY
68
Hanger set-B
1
91
Spring Wash
2
69
Washer 6X16X1.5t
4
92
1-2 teeth Nuts
2
70
Safety Hook
2
94
Insert Part 50-38
2
71
Nylon Nut M6
2
95
Cable Set for GYM
2
72
Pull Pin
2
96
Tapping screw M4X15L
4
73
Nut
2
97
Phillips screw M4-15L
8
74
T-knob
2
98
Flat Wash 6X12X2T
2
75
Back Metal Cover
1
99
Mesh cover
4
76
Bushing-19.3x(25.35x31)x(25+4)-JCA001
4
100
Cable(470L)
2
77
Lat Pull Bar 3mm
2
101
Hexagonal screws M5
4
78
Cam Pull Pin with Dipping
1
102
Locking Nut
4
79
Flange fixed Nut
1
103
Cable (3695L)
2
80
Set Screw M4X5
2
105
Stabilizer Set-Left
1
81
Sink Nut M4X10L
10
106
Stabilizer Set-Right
1
82
3/8 teeth Nut
2
107
Slide Stabilizer
2
83
25.4 End Cap
4
108
Insert Part 30-38
2
84
Flat Wash 10x22x2T
6
109
Knob(20L)
2
85
Flat Wash 8x38x2T
2
110
End Cap 20x40
2
86
1-2 teeth Nylon Nut
4
111
Rear Stabilizer-Left
1
88
Bolt 10.5x56L
2
112
Rear Stabilizer-Right
1
89
Flat Wash 13x47.5x3T
2
113
Knob(40L)
2
90
Plastic Parts
2