Health O Meter Pro Plus 2101KL User manual

1
Model 2101KL
Digital Platform Scale
User Instructions
P/N UM2101KLE_ Rev20170710

2
Model 2101KL
Thank you for your purchase of this Health o meter®Professional product. Please read
this manual carefully, and keep it for easy reference or training.
TABLE OF CONTENTS
Cautions and Warnings.............................................................................................3
Specifications............................................................................................................4
Certifications / Connectivity / Disposal ......................................................................5
Assembly Instructions ..............................................................................................6
Set-up Instructions ...................................................................................................10
Operating Instructions...............................................................................................13
Maintenance..............................................................................................................19
Calibration....…………………………………..………………………………..……….…..20
Troubleshooting …………………………………………………………………………….22
Warranty..…………………………………………………………………………………….23
Note: This scale has been factory calibrated, and does not
require calibration prior to use.
Please register your scale for warranty coverage at:
www.homscales.com
For User Instructions updates and revisions please go to:
www.homscales.com

3
CAUTIONS AND WARNINGS
To prevent injury and damage to your scale, please follow these instructions very
carefully.
Assemble and operate the scale per the enclosed user instructions.
Do not transport the scale with any weight on the platform.
Do not exceed weight limit of 1000 lb / 454 kg for this scale.
For accurate weighing, this scale must be placed on a flat, stable surface.
For accurate weighing, verify before each use the proper operation
according to the procedure described in this manual.
Do not use in the presence of flammable or explosive materials.
For accurate weighing, if the battery icon indicates that the battery is low,
replace the batteries or switch to theAC adapter as soon as possible.
When replacing / inserting batteries, be sure to use all new batteries.
To prevent patient injury, the patient must be attended throughout the entire weighing
event. Caregivers should ensure that the patient is stable and provide support as
needed when getting onto and off of the scale.
Patient should wear socks or other form of lightweight foot covering during weighing
event.
Using the Scale with the Optional AC Adapter
Operate this scale exclusively with the AC adapter provided by Health o meter®
Professional. Use of an unspecified adapter will void the warranty and can pose
a serious safety hazard.
Operating this scale at voltages and frequencies other than specified can
damage the equipment and will void the warranty.
Prior to using this scale, inspect the AC adapter cord for cracking /
fraying, and for broken / bent plug prongs.
Prior to using this scale, ensure that the AC adapter is plugged into an
outlet with the rated voltage appropriate for operation.
Ensure that the AC adapter outlet is wired to a circuit breaker or other
protected power source.
Unplug the AC adapter, and carefully store both the adapter and adapter
cord before moving the scale.
Ensure that theAC adapter and scale do not come in contact with liquids,
excessive temperature, or excessive humidity.
If the scale is being connected to another medical device, the power
adapter must not be used. Disconnect the power adapter from the scale
and use only the battery power.

4
SPECIFICATIONS
General
Model 2101KL digital scales use highly sophisticated microprocessor technology. Each
precision scale is designed to provide accurate, reliable and repeatable weight
measurements. This scale uses motion-sensing weighing technology in order to
determine the actual weight of a moving patient.
Although the patient’s weight can be displayed in either pounds (LB) or kilograms (KG),
the scale can be “locked” such that the user cannot change the displayed Unit of
Measurement (UOM).
Scale Specifications
Capacity and
Resolution
1000 lb x 0.2 lb (454 kg x 0.1 kg)
Power Requirements
110-240VAC, 50-60Hz to 9V DC Adapter, ADPT30 (included) or 6 D batteries
(not included)
Environmental
Operating temperatures: 50°F to 95°F (10°C to 35°C)
Storage temperatures: 30°F to 125°F (0°C to 50°C)
Maximum Humidity: 85% RH
Physical Dimensions
Platform
Length: 22” (559mm)
Width: 26” (660mm)
Height: 2-3/8” (60mm)
Assembled Size
Length: 27” (686mm)
Width: 31” (787mm)
Height: 50” (1270mm)
Scale information can also be found by pressing and selecting “Scale Info” in the
submenu. This screen provides model number, capacity, calibration weight, the most
recent field calibration date, number of field calibrations and software version.
Help

5
CERTIFICATIONS / CONNECTIVITY / DISPOSAL
Certification Descriptions
Connectivity Information
To enable reliable transmission of weight, height, and Body Mass Index (BMI) data, this
scale is designed to interface with a computer, EMR software or other electronic device
via various Health o meter®Professional Connectivity Solutions. This connectivity helps
minimize transcription errors when recording patient data.
For more information regarding how to connect this scale to other electronic devices,
please contact Health o meter®Professional Scales Technical Support at 1-800-638-
3722 or visit www.homscales.com/innovations/connectivity-solutions.
Scale Disposal
This Health o meter®Professional scale must be disposed of properly as electronic
waste. Follow the national, regional or local regulations which apply to you for disposal
of electronic waste or batteries. Do not dispose of this device in the domestic waste
stream.
Pelstar, LLC has been officially certified as the manufacturer
of Health o meter®Professional medical devices. The Pelstar,
LLC quality assurance system covers the development,
production, sales and service of medical scales and
measuring systems.

6
ASSEMBLY INSTRUCTIONS
Before Assembly
Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact
your shipper or a Health o meter®Professional representative immediately at 1-800-815-6615.
Claims must be filed with the shipper as soon as possible after receipt of the package. The
following information details what you will find inside the main carton as you unpack the parts for
assembly.
To prevent scratching any components, carefully remove each assembly from the carton and
unwrap the packing materials. Set the carton aside for storage. To avoid damaging the scale
parts when unpacking, do not use a box cutter, knife, scissors, or any sharp object to open the
protective inner packaging.
Parts List
(2) Side handrails (Parts A and C)
(1) Center handrail (Part B)
(1) Scale platform/base (Part D)
(1) Handle (Part E)
(1) Brown box containing:
(1) Box containing the AC adapter
(1) Display Head
(1) User Information
(1) White box containing:
o(4) Feet
o(1) AC adapter holder
o(1) 4mm Allen wrench
o(1) 5mm Allen wrench
o(1) 8mm Allen wrench
o(1) Plastic bracket cover
oHardware for assembly:
- A –M10 1.5 x 40mm bolts, Qty.2
- B –M8 1.25 x 20mm bolts, Qty. 16
- C –M6 1.0 x 10mm bolts, Qty.2
- D –#8 ½ sheet metal screws, Qty. 2
- E –M4 0.7 x 10mm screws, Qty.6 for assembly, 1 spare
- F –M8 washers, Qty. 16
Tools Required
Phillips head screwdriver (not included), Allen wrenches (included).
Figure 1 –Scale Parts
Handle (Part E)
Left Side Handrail
(Part A)
Right Side
Handrail (Part C)
Center Handrail
(Part B)
Platform/Base
(Part D)
Brown Box Contents
White Box Contents
A
B
C
D
E
F
Hardware Detail

7
ASSEMBLY INSTRUCTIONS (CONT.)
Health o meter® Professional Scales recommends that assembly is performed by
two people.
Warning: Do not drop scale, as this can permanently damage the load cells.
Caution: Do not insert the batteries into the display head until it is mounted onto
the scale.
1. Remove the scale platform/base (part D,
see Figure 1 on page 6) from the carton
and place on a flat, level, and dry
surface. Locate the center handrail (part
B) and the load cell cable protruding
from the bottom of the right side. Feed
the load cell cable into the large center
hole of the right handrail mounting hole
in the scale base.
2. Position the center handrail over the left
and right mounting holes on the scale
base. Be sure not to pinch the cable.
Place the (8) M8 washers onto the (8)
M8 1.25 x 20mm bolts and insert into the
mounting holes on the scale base, lightly
tighten using the included 5mm Allen
wrench. Do not over tighten.
3. Align the left and right side handrails
(parts A and C) with the mounting holes
in the platform. Place the (8) M8 washers
onto the (8) M8 1.25 x 20mm bolts and
insert into the mounting holes on the
platform. Lightly tighten using the 5mm
Allen wrench.
4. Align the left and right side handrails
with the holes on the front of the left
and right sides of the center handrail.
Obtain the (2) M10 1.5 x 40mm bolts
and insert into the left and right holes
on the back of the center handrail.
Using the included 8mm Allen
wrench, fully tighten the two M10
bolts and then fully tighten all bolts
starting from the top of the scale
down to the platform.

8
ASSEMBLY INSTRUCTIONS (CONT.)
5. Pull forward on the side handrails to tip
the scale and gently place it face down
on the floor. Grasp the load cell cable
protruding from the bottom of the
platform and feed it through the
protective metal shield.
6. Plug the load cell cable into the load cell
port located on the back of the platform.
Pull the excess cable through the top of
the center handrail.
7. Thread the (4) feet into the underside of
the platform. Each foot should be
completely hand tightened then back the
feet out 1-½ full turns. This allows for
proper load cell operation. Carefully tilt
the scale back to an upright position on
the floor. Warning: Do not drop scale,
as this can permanently damage the
load cells. Adjust the feet to level the
scale. Be certain that the feet are not
completely tightened into the platform.
8. Obtain the display head and align the
four holes on the back of the display
head with the four mounting holes on
the silver display support. Using the (4)
included M4 x 0.7 x 10mm screws,
fasten the display head onto the display
support using a Phillips head
screwdriver to tighten the screws.

9
ASSEMBLY INSTRUCTIONS (CONT.)
9. Route the load cell cable to the side and
then between the washer and the silver
lip in the bracket. Clip the load cell cable
into the divot in the middle of the cover.
Obtain the plastic bracket cover and the
two remaining M4 x 0.7 x 10mm machine
screws. Using a Phillips screwdriver,
attach the bracket cover over the silver
display bracket.
10. Plug the load cell cable into the load cell
port on the rear of the display head.
11. Obtain the handle (part E) and align it
with the ends of the side handrails. Insert
the (2) medium M6 1.0 x 10mm bolts into
the holes on the underside of the handle.
Using the included 4mm Allen wrench,
attach the handle to the center handrail.
The handle should be attached with the
Warning label facing up.
12. Attach the adapter holder to the handrail
using the (2) included sheet metal
screws. Use a Phillips head screwdriver
to tighten the screws. The scale is now
assembled. See Powering the Scale on
page 10 for battery/AC adapter
instructions.

10
SET-UP INSTRUCTIONS
Powering the Scale
Plug the AC adapter into the power adapter jack (the jack is located on the rear of the display
head), then plug the scale’s AC adapter into the power source.
Warning: To avoid a safety hazard, do not use an unspecified AC adapter. Only use the
Health o meter® Professional AC adapter model ADPT30 designed for this scale.
For battery operation, see Battery Installation below.
Battery Installation
1. If connected, unplug the AC adapter from
the power source. Use a Phillips head
screwdriver to remove the battery cover
on the side of the display head by
unscrewing the battery cover screw.
2. Remove the battery pack from the
display head. Replace or install fresh
batteries, making sure to install them in
the proper direction. Health o meter®
Professional recommends using an
alkaline battery rated for 130°F (54°C)
operation. Do not use Zinc-Carbon
batteries.
3. Re-insert the battery pack into the
display head, ensuring the end with the
silver contacts is inserted facing the
inside of the display. Re-attach the
battery cover to the display head by
replacing the battery cover screw.
Warning: If the scale will not be used for some time, remove the batteries to avoid a safety
hazard. Disposal of batteries must be performed in accordance with the prevailing national,
regional or local regulations that apply to you.
Power Adapter
Jack