Heat Outdoors Shadow Diffusion Operation and maintenance manual

Shadow Diffusion
Wall Heater
Safety Instructions and Operation Manual
902119
Heat Outdoors
Unit 9, Stort Valley Industrial Estate
Stansted Road, Bishop’s Stortford
Hertfordshire, United Kingdom
CM23 2TU
www.heat-outdoors.co.uk
01279 466500
[email protected]

2Contents
Contents
Brief Introduction . . . . . . . . . . . . . . . . . 3
Important Information . . . . . . . . . . . . . . . 3
Safety Instructions . . . . . . . . . . . . . . . . . 4
Assembly Instructions . . . . . . . . . . . . . . . 6
Operation . . . . . . . . . . . . . . . . . . . . . 7
Cleaning & maintenance . . . . . . . . . . . . . . 8
Storage . . . . . . . . . . . . . . . . . . . . . . 9
Technical Specication . . . . . . . . . . . . . . . 9
Customer Service . . . . . . . . . . . . . . . . . 9

3
Brief Introduction
Brief Introduction
Thank you for choosing our Shadow Diffusion Wall Heater. This instruction manual will
provide you with valuable information necessary for the proper care and maintenance of
your new product. Please take a few moments to thoroughly read the instructions and
familiarise yourself with all the operational aspects of your new heater.
Important Information
Please carefully read all instructions provided before using this appliance. This heater
must be installed and used as instructed.
This Operation Manual contains the important safety information, as well as some
recommendations on correct use, installation and maintenance of the appliance.
When operating this infrared heater observe necessary safety precautions, improper use
may result in injury or damage to property.
Ensure to keep this manual along with your sales receipt, and if possible, cardboard
package and packing material in case return of the unit is necessary.
• Unpack the halogen heater making sure that all the items are
present, there are no components left in the box and the heater head
is free from any packing material.
• Using the detailed diagrams follow the steps to assemble your
halogen heater.
• Do not connect the halogen heater to the electrical supply until the
assembly is complete.
• Do not connect the halogen heater to the electrical supply if any of
the components or the power cord is damaged in any way.

4Safety Instructions
Safety Instructions
Read these instructions before using.
WARNING
Potential re risk if the heater is covered by any material or positioned close to curtains
or other ammable materials.
• This appliance can be used by children aged 8 years+, and persons with reduced
physical, sensory or mental capabilities if they have been instructed to use the
appliance in a safe way.
• Children of less than 3 years should be kept away unless continuously supervised.
• Children aged between 3-8 years shall only switch on/off the appliance provided
that it has been placed in its intended operating position.
• Children aged between 3-8 years shall not plug in, regulate, clean or perform
maintenance on the appliance.
• CAUTION — Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are
present.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or a similarly qualied person to avoid a hazard.
• To avoid overheating, please do not cover the heater.
• The heater must not be located immediately below a socket outlet.
• The heater must be installed at least 1.8 m above the oor.
• After xing to a wall or ceiling, adjustments to the direction of radiation must only
be made with the appropriate tools.
• Do not use the heater with a programmer, separate remote control system or any
other device that switches the heater on/off automatically.
• A re risk exists if the heater is covered or positioned incorrectly.
• It’s dangerous to install the heater close to curtains and other combustible
materials such as curtains, marquees, ags plastic foils etc..
• Do not use the heater in reach of a shower, bath or a swimming pool.
• Do not use in unventilated areas.
• Do not use where gas, petrol, paint or other ammable materials are stored.
• Do not push any items through, obstruct or cover the grills of the heater head.
• Do not move the heater when it is connected to electrical supply.
• Always wait till the heater has cooled down completely before storage.
• Do not touch the heater head during in use.

5
Safety Instructions
• Do not leave heater turned on and unattended especially when children and or
animals are in the vicinity.
• The heater must be placed with a clearance of 100cm to the wall and 30cm to
the ceiling.
• The heater is extremely hot during operation. It keeps hot for a period after
shutdown. Potential danger will occur when touching it during this period.
• The heater must be handled with care, no violent vibration or hitting.
• In case of damage, it must be repaired by a professional electrician.
• This heater is not equipped with a device to control room temperature. Do not
use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.
• Do not use the heater as a cloth drier or tower drier.
• Do not use the heater as a sauna heater.
• Do not use the heater as a room heater.
• Do not use the heater in place of animal propagating and raising.
• Do not immerse the heater into water for cleaning.

6Assembly Instructions
When unpacking the heater, please make sure that all the items are present, there
are no components left in the box and that all the parts are free from any
packing material.
Do not connect the heater to the electrical supply until all the assembly is done.
Do not connect the heater to the electrical supply if any of the components or
power cord are damaged any way. In case of any doubt, please contact your local
supplier.
A: Wall Mounting
1. Mark and drill 4 holes 10mm in diameter on the wall.
2. Insert 4 expansion bolts into the holes, align the heater onto the bolts and lock
with 4 nuts tightly.
Assembly Instructions

7
Assembly Instructions
B: Angle Adjustment
• Loosen the nuts on both sides, adjust the heater to the desired angle. Tighten
the nuts to seal in place.
Operation
• Insert the plug into the
power socket
• The power setting on the heater
allows you to turn the heater on/off or
adjust the power manually.

8Cleaning & maintenance
Cleaning & maintenance
Heater housing, grills and internal reector
• Disconnect the appliance from the power supply system.
• After the appliance has cooled down, the housing can be wiped clean with a
damp cloth.
•Do not touch the bulb element with your ngers. Stains can build up from touching
the bulb and may cause the bulb to malfunction.
• Do not use any abrasive or hard cleaning products on any part of this heater.
• Do not immerse the appliance in water.
• Wait until the unit is completely dry before use.
Cleaning of heater lamp
• Disconnect the appliance from the power supply system.
•Wipe the lamp over with a damp cloth. Ensure no detergents or cleaning uids are
used as they may cause damage to the lamp coating.
https://www.heat-outdoors.co.uk/help-desk/useful-articles/heater-and-lamp-
maintenance.html
Any maintenance or repairs should only be carried out by a qualied electrician if you’re
unsure how to do so. For further information and guidance, visit our online help articles
and videos.
Disposal
In accordance with European Directive 2001/96/EG concerning used
electrical and electronic appliances (waste electrical and electronic
equipment – WEEE), please return any electrical equipment that you will no
longer use to the collection points provided for their disposal.
This symbol indicates that the appliance cannot be treated as normal
domestic trash, but must be handed to a collection point for recycling electric and
electronic appliances.
Information concerning where the equipment can be disposed of can be obtained from
your local authority.

9
Storage
Storage
If the heater will not be used for a long period of time, store it in a cool, dry location. To
prevent dust and dirt build-up, use the original packaging to repack the heater.
Technical Specication
Ratings: 220-240V AC 50-60Hz
Power consumption: 2000W
Dimensions: 630x140x330 mm (LxWxD)
Net weight: 3 kg
Ingress Rating: IP54
Customer Service
• Repairs must be carried out by authorised specialists, thus ensuring electrical safety.
•Please contact us or a suitably qualied electrician.
• Improper repairs could lead to danger to the user.
Warranty does not cover damage of failure which results from alteration, accident,
misuse, abuse, neglect, commercial use or improper maintenance. In line with our policy
of continuous product development we reserve the right to change the product and
documentation specications without notice.

Heat Outdoors
Unit 9, Stort Valley Industrial Estate
Stansted Road, Bishop’s Stortford
Hertfordshire, United Kingdom
CM23 2TU
www.heat-outdoors.co.uk
01279 466500
[email protected]