HighPoint RocketAIC 7540HM Series User manual

1
RocketAIC 7540HM
8x M.2 to PCIe 4.0 x16 NVMe Drive
Quick Installation Guide
V1.02

2
System Requirements
Hardware
•Mac Platforms: 2023 M2 Mac Pro Workstation
Operating System
•macOS Ventura 13.x and later

3
Hardware
Front View
Full-Length anodized aluminum heat sink
PCIe 4.0 x16 Host Interface
Full Height form factor
Low-Noise Cooling Fan
External power port

4
Hardware Installation
Please follow the steps below to install the RocketAIC 7540HM into a
2023 M2 Mac Pro Workstation with a compatible PCIe slot.
1. Disconnect all power and powered devices from your system. Open
the 2023 M2 Mac Pro Workstation chassis cover.
2. Insert the RocketAIC 7540HM into one of the system’s open PCIe
4.0 x16 slots.
3. Once the RocketAIC 7540HM is fully seated, reassemble the
chassis cover and reconnect the system to the power supply.
Note: If you encounter any problems with damaged parts (e.g. fans,
screws, heat sinks, heat dissipation silicone, etc.) during use, you need
to contact our customer support team for professional help and
guidance to avoid unexpected situations. You will be responsible for all
the consequences of solving the problem by yourself.

5
Resources
A variety of manuals, guides and FAQs are available for RocketAIC
7540HM series NVMe drives.
In addition, we recommend visiting the Software Downloads webpage
for the latest drivers, management interfaces, and installation guides.
For Software Downloads, Documentation and more information about
this product, please visit the following website:
https://www.highpoint-tech.com/rocketaic-mac/ra7540hm
FAQ & Troubleshooting:
FAQ - HighPoint Technologies, Inc. (helpjuice.com)

6
Customer Support
If you encounter any problems while utilizing RocketAIC NVMe drives,
or have any questions about this or any other HighPoint Technologies,
Inc. product, feel free to contact our Customer Support Department.
Web Support:
https://www.highpoint-tech.com/websupport
HighPoint Technologies, Inc. websites:
https://www.highpoint-tech.com
© Copyright 2023 HighPoint Technologies, Inc. All rights reserved.